Yes please Didenko i would like that you send your code to me & to the whole xenomai-help post.

thanks

From: Didenko Sergey <didenkos@domain.hid>
To: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Cc: Wael Showair <showair2003@domain.hid>; Xenomai-help@domain.hid
Sent: Tue, November 3, 2009 5:45:06 PM
Subject: Re: [Xenomai-help] Porting I-Pipe for new ARM board

Gilles, I gues you are talking about the code which I got for MV 88F6290.

With some changes it is working on my board now, so, Wael, if you want, I can send it to you in 10 hours, it should work on your board.

Sergey

2009/11/4 Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>

Wael Showair wrote:
> Hi All,
> i have TS-7800 board based on Marvell 88F5182 processor core.
> Unfortunately it is not supported by I-Pipe patch so according to the
> following link:
>
> http://www.xenomai.org/index.php/I-pipe:ArmPorting
>
> And with aid of this forum thread:
>
> http://www.mail-archive.com/xenomai@xenomai.org

>If you follow that thread, you will see that I already told its author
>that the code was not correct.

>Fortunately Philippe did a port which was tested and works, I will fix
>one or two details and send it tonight (european time).

--
Gilles