From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <222270.8731.qm@domain.hid> References: <725957.56219.qm@domain.hid> <4AF04886.9040903@domain.hid> <1f3e02580911030745o128df8aeve4bdd44bad9c3db7@domain.hid> Date: Tue, 3 Nov 2009 22:58:10 -0800 (PST) From: Wael Showair In-Reply-To: <1f3e02580911030745o128df8aeve4bdd44bad9c3db7@domain.hid> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="0-1150645985-1257317890=:8731" Subject: Re: [Xenomai-help] Porting I-Pipe for new ARM board List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Didenko Sergey , Gilles Chanteperdrix Cc: Xenomai-help@domain.hid --0-1150645985-1257317890=:8731 Content-Type: text/plain; charset=us-ascii Yes please Didenko i would like that you send your code to me & to the whole xenomai-help post. thanks ________________________________ From: Didenko Sergey To: Gilles Chanteperdrix Cc: Wael Showair ; Xenomai-help@domain.hid Sent: Tue, November 3, 2009 5:45:06 PM Subject: Re: [Xenomai-help] Porting I-Pipe for new ARM board Gilles, I gues you are talking about the code which I got for MV 88F6290. With some changes it is working on my board now, so, Wael, if you want, I can send it to you in 10 hours, it should work on your board. Sergey 2009/11/4 Gilles Chanteperdrix Wael Showair wrote: >> Hi All, >> i have TS-7800 board based on Marvell 88F5182 processor core. >> Unfortunately it is not supported by I-Pipe patch so according to the >> following link: >>> >> http://www.xenomai.org/index.php/I-pipe:ArmPorting >> >> And with aid of this forum thread: >> >> http://www.mail-archive.com/xenomai@xenomai.org > >>If you follow that thread, you will see that I already told its author >>that the code was not correct. > >>Fortunately Philippe did a port which was tested and works, I will fix >>one or two details and send it tonight (european time). > >-- > Gilles > > --0-1150645985-1257317890=:8731 Content-Type: text/html; charset=us-ascii

Yes please Didenko i would like that you send your code to me & to the whole xenomai-help post.

thanks

From: Didenko Sergey <didenkos@domain.hid>
To: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Cc: Wael Showair <showair2003@domain.hid>; Xenomai-help@domain.hid
Sent: Tue, November 3, 2009 5:45:06 PM
Subject: Re: [Xenomai-help] Porting I-Pipe for new ARM board

Gilles, I gues you are talking about the code which I got for MV 88F6290.

With some changes it is working on my board now, so, Wael, if you want, I can send it to you in 10 hours, it should work on your board.

Sergey

2009/11/4 Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>

Wael Showair wrote:
> Hi All,
> i have TS-7800 board based on Marvell 88F5182 processor core.
> Unfortunately it is not supported by I-Pipe patch so according to the
> following link:
>
> http://www.xenomai.org/index.php/I-pipe:ArmPorting
>
> And with aid of this forum thread:
>
> http://www.mail-archive.com/xenomai@xenomai.org

>If you follow that thread, you will see that I already told its author
>that the code was not correct.

>Fortunately Philippe did a port which was tested and works, I will fix
>one or two details and send it tonight (european time).

--
Gilles

--0-1150645985-1257317890=:8731--