All of lore.kernel.org
 help / color / mirror / Atom feed
From: CrazyCat <crazycat69@narod.ru>
To: linux-media@vger.kernel.org
Subject: [PATCH 3/4] si2157: Si2141/2151 tuner support.
Date: Fri, 09 Dec 2016 02:19:58 +0200	[thread overview]
Message-ID: <2233965.zV8xNtq62S@computer> (raw)

Support for new tuner version.

Signed-off-by: CrazyCat <crazycat69@narod.ru>
---
 drivers/media/tuners/si2157.c      | 71 ++++++++++++++++++++++++++++++++++----
 drivers/media/tuners/si2157_priv.h |  2 ++
 2 files changed, 67 insertions(+), 6 deletions(-)

diff --git a/drivers/media/tuners/si2157.c b/drivers/media/tuners/si2157.c
index 57b2508..69fd21e 100644
--- a/drivers/media/tuners/si2157.c
+++ b/drivers/media/tuners/si2157.c
@@ -1,5 +1,5 @@
 /*
- * Silicon Labs Si2146/2147/2148/2157/2158 silicon tuner driver
+ * Silicon Labs Si2141/2146/2147/2148/2151/2157/2158 silicon tuner driver
  *
  * Copyright (C) 2014 Antti Palosaari <crope@iki.fi>
  *
@@ -84,7 +84,7 @@ static int si2157_init(struct dvb_frontend *fe)
 	struct si2157_cmd cmd;
 	const struct firmware *fw;
 	const char *fw_name;
-	unsigned int uitmp, chip_id;
+	unsigned int uitmp, chip_id, count;
 
 	dev_dbg(&client->dev, "\n");
 
@@ -102,14 +102,46 @@ static int si2157_init(struct dvb_frontend *fe)
 	if (uitmp == dev->if_frequency / 1000)
 		goto warm;
 
+	if (dev->chiptype == SI2157_CHIPTYPE_SI2141) {
+		count = 0;
+		do {
+			if (count > 10)
+				goto err;
+
+			/* reset */
+			memcpy(cmd.args, "\xc0\x05\x00\x00", 4);
+			cmd.wlen = 4;
+			cmd.rlen = 1;
+			ret = si2157_cmd_execute(client, &cmd);
+			if (ret)
+				goto err;
+
+			memcpy(cmd.args, "\xc0\x00\x0d\x0e\x00\x01\x01\x01\x01\x03", 10);
+			cmd.wlen = 10;
+			cmd.rlen = 1;
+			ret = si2157_cmd_execute(client, &cmd);
+			if (ret)
+				goto err;
+			count++;
+		} while (cmd.args[0] == 0xfe);
+		dev_info(&client->dev, "Si2141/2151 reset attempts %d\n", count);
+	}
+
 	/* power up */
-	if (dev->chiptype == SI2157_CHIPTYPE_SI2146) {
+	switch (dev->chiptype) {
+	case SI2157_CHIPTYPE_SI2146:
 		memcpy(cmd.args, "\xc0\x05\x01\x00\x00\x0b\x00\x00\x01", 9);
 		cmd.wlen = 9;
-	} else {
+		break;
+	case SI2157_CHIPTYPE_SI2141:
+		memcpy(cmd.args, "\xc0\x08\x01\x02\x00\x08\x01", 7);
+		cmd.wlen = 7;
+		break;
+	default:
 		memcpy(cmd.args, "\xc0\x00\x0c\x00\x00\x01\x01\x01\x01\x01\x01\x02\x00\x00\x01", 15);
 		cmd.wlen = 15;
 	}
+
 	cmd.rlen = 1;
 	ret = si2157_cmd_execute(client, &cmd);
 	if (ret)
@@ -131,6 +163,8 @@ static int si2157_init(struct dvb_frontend *fe)
 	#define SI2157_A30 ('A' << 24 | 57 << 16 | '3' << 8 | '0' << 0)
 	#define SI2147_A30 ('A' << 24 | 47 << 16 | '3' << 8 | '0' << 0)
 	#define SI2146_A10 ('A' << 24 | 46 << 16 | '1' << 8 | '0' << 0)
+	#define SI2141_A10 ('A' << 24 | 41 << 16 | '1' << 8 | '0' << 0)
+	#define SI2151_A10 ('A' << 24 | 51 << 16 | '1' << 8 | '0' << 0)
 
 	switch (chip_id) {
 	case SI2158_A20:
@@ -142,6 +176,10 @@ static int si2157_init(struct dvb_frontend *fe)
 	case SI2146_A10:
 		fw_name = NULL;
 		break;
+	case SI2141_A10:
+	case SI2151_A10:
+		fw_name = SI2141_A10_FIRMWARE;
+		break;
 	default:
 		dev_err(&client->dev, "unknown chip version Si21%d-%c%c%c\n",
 				cmd.args[2], cmd.args[1],
@@ -214,6 +252,23 @@ static int si2157_init(struct dvb_frontend *fe)
 
 	dev_info(&client->dev, "firmware version: %c.%c.%d\n",
 			cmd.args[6], cmd.args[7], cmd.args[8]);
+
+	if (dev->chiptype == SI2157_CHIPTYPE_SI2141) {
+		/* set clock */
+		memcpy(cmd.args, "\xc0\x00\x0d", 3);
+		cmd.wlen = 3;
+		cmd.rlen = 1;
+		ret = si2157_cmd_execute(client, &cmd);
+		if (ret)
+			goto err;
+		/* setup PIN */
+		memcpy(cmd.args, "\x12\x80\x80\x85\x00\x81\x00", 7);
+		cmd.wlen = 7;
+		cmd.rlen = 7;
+		ret = si2157_cmd_execute(client, &cmd);
+		if (ret)
+			goto err;
+	}
 warm:
 	/* init statistics in order signal app which are supported */
 	c->strength.len = 1;
@@ -471,7 +526,8 @@ static int si2157_probe(struct i2c_client *client,
 #endif
 
 	dev_info(&client->dev, "Silicon Labs %s successfully attached\n",
-			dev->chiptype == SI2157_CHIPTYPE_SI2146 ?
+			dev->chiptype == SI2157_CHIPTYPE_SI2141 ?
+			"Si2141/2151" : dev->chiptype == SI2157_CHIPTYPE_SI2146 ?
 			"Si2146" : "Si2147/2148/2157/2158");
 
 	return 0;
@@ -508,6 +564,8 @@ static int si2157_remove(struct i2c_client *client)
 static const struct i2c_device_id si2157_id_table[] = {
 	{"si2157", SI2157_CHIPTYPE_SI2157},
 	{"si2146", SI2157_CHIPTYPE_SI2146},
+	{"si2141", SI2157_CHIPTYPE_SI2141},
+	{"si2151", SI2157_CHIPTYPE_SI2141},
 	{}
 };
 MODULE_DEVICE_TABLE(i2c, si2157_id_table);
@@ -524,7 +582,8 @@ static int si2157_remove(struct i2c_client *client)
 
 module_i2c_driver(si2157_driver);
 
-MODULE_DESCRIPTION("Silicon Labs Si2146/2147/2148/2157/2158 silicon tuner driver");
+MODULE_DESCRIPTION("Silicon Labs Si2141/2146/2147/2148/2151/2157/2158 silicon tuner driver");
 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
 MODULE_LICENSE("GPL");
 MODULE_FIRMWARE(SI2158_A20_FIRMWARE);
+MODULE_FIRMWARE(SI2141_A10_FIRMWARE);
diff --git a/drivers/media/tuners/si2157_priv.h b/drivers/media/tuners/si2157_priv.h
index d6b2c7b..e6436f7 100644
--- a/drivers/media/tuners/si2157_priv.h
+++ b/drivers/media/tuners/si2157_priv.h
@@ -42,6 +42,7 @@ struct si2157_dev {
 
 #define SI2157_CHIPTYPE_SI2157 0
 #define SI2157_CHIPTYPE_SI2146 1
+#define SI2157_CHIPTYPE_SI2141 2
 
 /* firmware command struct */
 #define SI2157_ARGLEN      30
@@ -52,5 +53,6 @@ struct si2157_cmd {
 };
 
 #define SI2158_A20_FIRMWARE "dvb-tuner-si2158-a20-01.fw"
+#define SI2141_A10_FIRMWARE "dvb-tuner-si2141-a10-01.fw"
 
 #endif
-- 
1.9.1



             reply	other threads:[~2016-12-09  0:23 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-09  0:19 CrazyCat [this message]
2016-12-09 11:17 ` [PATCH 3/4] si2157: Si2141/2151 tuner support Antti Palosaari

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2233965.zV8xNtq62S@computer \
    --to=crazycat69@narod.ru \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.