From: Sven Eckelmann <sven@narfation.org>
To: b.a.t.m.a.n@lists.open-mesh.org
Subject: Re: [B.A.T.M.A.N.] [Patchv2 0/7] batman-adv: Optimizations for setups running dat and bla
Date: Fri, 26 Feb 2016 17:20:54 +0100 [thread overview]
Message-ID: <2279019.udanyR4lfT@bentobox> (raw)
In-Reply-To: <20160226141638.169e15ae@ubuntu>
[-- Attachment #1.1: Type: text/plain, Size: 5113 bytes --]
=2D-nextPart5558910.ktjs2kg59P
Content-Transfer-Encoding: 7Bit
Content-Type: text/plain; charset="us-ascii"
On Friday 26 February 2016 14:16:38 Andreas Pape wrote:
> This patchset introduces optimizations for batman-adv in setups having
> several gateways into a common (switched) Ethernet backbone network
> especially if dat is additionally enabled.
[...]
See my other comments directly to the patches. Please try to set the
in-reply-to of the patches to the message-id of the cover letter. Otherwise
the messages aren't correctly threaded on the mailinglist [1].
And you can set the version number of the patch directly using
git-format-patch:
git format-patch -v 2 origin/master
I haven't done the complete build_test run but at least a quick test against
4.4 only. The result is attached.
Kind regards,
Sven
[1] https://lists.open-mesh.org/pipermail/b.a.t.m.a.n/2016-February/thread.html
=2D-nextPart5558910.ktjs2kg59P
Content-Disposition: attachment; filename="build-test_andreas-pape_bla-fixes.mbox"
Content-Transfer-Encoding: 7Bit
Content-Type: application/mbox; name="build-test_andreas-pape_bla-fixes.mbox"
X-Original-To: sven
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: blabla Build check errors found: 2016-02-26
From: postmaster@open-mesh.org
Date: Fri, 26 Feb 2016 17:17:23 +0100 (CET)
Name of failed tests
====================
* bracket_align blabla ./net/batman-adv/bridge_loop_avoidance.c
* bracket_align blabla ./net/batman-adv/distributed-arp-table.c
* bracket_align blabla ./net/batman-adv/soft-interface.c
* checkpatch blabla ./net/batman-adv/bridge_loop_avoidance.c
* smatch blabla linux-4.4 CONFIG_BATMAN_ADV_BLA=n CONFIG_BATMAN_ADV_DAT=n CONFIG_BATMAN_ADV_DEBUG=n CONFIG_BATMAN_ADV_NC=y CONFIG_BATMAN_ADV_MCAST=y CONFIG_BATMAN_ADV_BATMAN_V=y
* smatch blabla linux-4.4 CONFIG_BATMAN_ADV_BLA=n CONFIG_BATMAN_ADV_DAT=n CONFIG_BATMAN_ADV_DEBUG=y CONFIG_BATMAN_ADV_NC=n CONFIG_BATMAN_ADV_MCAST=n CONFIG_BATMAN_ADV_BATMAN_V=y
* smatch blabla linux-4.4 CONFIG_BATMAN_ADV_BLA=n CONFIG_BATMAN_ADV_DAT=y CONFIG_BATMAN_ADV_DEBUG=n CONFIG_BATMAN_ADV_NC=n CONFIG_BATMAN_ADV_MCAST=y CONFIG_BATMAN_ADV_BATMAN_V=n
* smatch blabla linux-4.4 CONFIG_BATMAN_ADV_BLA=y CONFIG_BATMAN_ADV_DAT=n CONFIG_BATMAN_ADV_DEBUG=n CONFIG_BATMAN_ADV_NC=n CONFIG_BATMAN_ADV_MCAST=n CONFIG_BATMAN_ADV_BATMAN_V=y
* sparse blabla linux-4.4 cfg: BLA=n DAT=n DEBUG=n NC=y MCAST=y BATMAN_V=y
* sparse blabla linux-4.4 cfg: BLA=n DAT=n DEBUG=y NC=n MCAST=n BATMAN_V=y
* sparse blabla linux-4.4 cfg: BLA=n DAT=y DEBUG=n NC=n MCAST=y BATMAN_V=n
* sparse blabla linux-4.4 cfg: BLA=y DAT=n DEBUG=n NC=n MCAST=n BATMAN_V=y
* unused_symbols blabla linux-4.4 cfg: BLA=y DAT=n DEBUG=n NC=n MCAST=n BATMAN_V=y
Output of different failed tests
================================
bracket_align blabla ./net/batman-adv/bridge_loop_avoidance.c
=2D------------------------------------------------------------
Found wrong alignment at ./net/batman-adv/bridge_loop_avoidance.c:1661, was 33 but expected 37
Found wrong alignment at ./net/batman-adv/bridge_loop_avoidance.c:1662, was 33 but expected 37
bracket_align blabla ./net/batman-adv/distributed-arp-table.c
=2D------------------------------------------------------------
Found wrong alignment at ./net/batman-adv/distributed-arp-table.c:1126, was 30 but expected 29
Found wrong alignment at ./net/batman-adv/distributed-arp-table.c:1128, was 30 but expected 29
bracket_align blabla ./net/batman-adv/soft-interface.c
=2D-----------------------------------------------------
Found wrong alignment at ./net/batman-adv/soft-interface.c:434, was 49 but expected 58
checkpatch blabla ./net/batman-adv/bridge_loop_avoidance.c
=2D---------------------------------------------------------
CHECK: Alignment should match open parenthesis
#1661: FILE: ./net/batman-adv/bridge_loop_avoidance.c:1661:
+ batadv_handle_claim(bat_priv, primary_if,
+ primary_if->net_dev->dev_addr,
total: 0 errors, 0 warnings, 1 checks, 1995 lines checked
smatch blabla linux-4.4 CONFIG_BATMAN_ADV_BLA=n CONFIG_BATMAN_ADV_DAT=n CONFIG_BATMAN_ADV_DEBUG=y CONFIG_BATMAN_ADV_NC=n CONFIG_BATMAN_ADV_MCAST=n CONFIG_BATMAN_ADV_BATMAN_V=y
=2D--------------------------------------------------------------------------
net/batman-adv/routing.c:896 batadv_recv_unicast_packet warn: unused return: orig_node = batadv_orig_hash_find()
net/batman-adv/soft-interface.c:433 batadv_interface_rx() warn: potential pointer math issue ('vhdr' is a 144 bit pointer)
sparse blabla linux-4.4 cfg: BLA=n DAT=n DEBUG=y NC=n MCAST=n BATMAN_V=y
=2D-----------------------------------------------------------------------
net/batman-adv/soft-interface.c:432:33: warning: restricted __be16 degrades to integer
unused_symbols blabla linux-4.4 cfg: BLA=y DAT=n DEBUG=n NC=n MCAST=n BATMAN_V=y
=2D--------------------------------------------------------------------------
batadv_bla_handle_local_claim
=2D-nextPart5558910.ktjs2kg59P--
This is a multi-part message in MIME format.
[-- Attachment #1.2: Type: text/plain, Size: 798 bytes --]
On Friday 26 February 2016 14:16:38 Andreas Pape wrote:
> This patchset introduces optimizations for batman-adv in setups having
> several gateways into a common (switched) Ethernet backbone network
> especially if dat is additionally enabled.
[...]
See my other comments directly to the patches. Please try to set the
in-reply-to of the patches to the message-id of the cover letter. Otherwise
the messages aren't correctly threaded on the mailinglist [1].
And you can set the version number of the patch directly using
git-format-patch:
git format-patch -v 2 origin/master
I haven't done the complete build_test run but at least a quick test against
4.4 only. The result is attached.
Kind regards,
Sven
[1] https://lists.open-mesh.org/pipermail/b.a.t.m.a.n/2016-February/thread.html
[-- Attachment #1.3: build-test_andreas-pape_bla-fixes.mbox --]
[-- Type: application/mbox, Size: 3887 bytes --]
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
next prev parent reply other threads:[~2016-02-26 16:20 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-26 13:16 [B.A.T.M.A.N.] [Patchv2 0/7] batman-adv: Optimizations for setups running dat and bla Andreas Pape
2016-02-26 16:20 ` Sven Eckelmann [this message]
2016-02-27 11:10 ` [B.A.T.M.A.N.] Antwort: " Andreas Pape
2016-02-27 11:31 ` Sven Eckelmann
2016-02-27 11:33 ` Andreas Pape
2016-02-27 11:40 ` Sven Eckelmann
2016-03-01 16:09 ` [B.A.T.M.A.N.] Antwort: " Andreas Pape
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2279019.udanyR4lfT@bentobox \
--to=sven@narfation.org \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.