Re: [PATCH v2] spi-fsl-dspi: Fix CTAR Register access

[Alexander Stein <alexander.stein@systec-electronic.com>]

On Thursday 10 December 2015 11:25:30, Bhuvanchandra DV wrote:
> DSPI instances in Vybrid have a different amount of chip selects
> and CTARs (Clock and transfer Attributes Register). In case of
> DSPI1 we only have 2 CTAR registers and 4 CS. In present driver
> implementation CTAR offset is derived from CS instance which will
> lead to out of bound access if chip select instance is greater than
> CTAR register instance, hence use single CTAR0 register for all CS
> instances. Since we write the CTAR register anyway before each access,
> there is no value in using the additional CTAR registers. Also one
> should not program a value in CTAS for a CTAR register that is not
> present, hence configure CTAS to use CTAR0.

Shouldn't the information put into struct fsl_dspi_devtype_data how much CTAR and CS the actual implementation has available? E.g. LS1021A has 6 CS and 4 CTAR

Best regards,
Alexander
-- 
-----
Please note our closure period for Christmas vacation and turn of the year
We are closed from 21st December 2015 to 3rd January 2016
-----
Dipl.-Inf. Alexander Stein
SYS TEC electronic GmbH
alexander.stein@systec-electronic.com

Legal and Commercial Address:
Am Windrad 2
08468 Heinsdorfergrund
Germany

Office: +49 (0) 3765 38600-0
Fax:    +49 (0) 3765 38600-4100
 
Managing Directors:
	Director Technology/CEO: Dipl.-Phys. Siegmar Schmidt;
	Director Commercial Affairs/COO: Dipl. Ing. (FH) Armin von Collrepp
Commercial Registry:
	Amtsgericht Chemnitz, HRB 28082; USt.-Id Nr. DE150534010