Re: [PATCH v6 1/2] Bluetooth: hci_qca: Load customized NVM based on the device property

[Harish Bandi <c-hbandi@codeaurora.org>]

On 2019-06-06 15:10, Rocky Liao wrote:
> QCA BTSOC NVM is a customized firmware file and different vendors may
> want to have different BTSOC configuration (e.g. Configure SCO over PCM
> or I2S, Setting Tx power, etc.) via this file. This patch will allow
> vendors to download different NVM firmware file by reading a device
> property "firmware-name".
> 
> Signed-off-by: Rocky Liao <rjliao@codeaurora.org>
> ---
> Changes in v6:
>   * Added read firmware-name property for both QCA6174 and WCN399X
> ---
>  drivers/bluetooth/btqca.c   |  8 ++++++--
>  drivers/bluetooth/btqca.h   |  6 ++++--
>  drivers/bluetooth/hci_qca.c | 18 +++++++++++++++++-
>  3 files changed, 27 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index cc12eec..a78b80e 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -332,7 +332,8 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev,
> const bdaddr_t *bdaddr)
>  EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
> 
>  int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> -		   enum qca_btsoc_type soc_type, u32 soc_ver)
> +		   enum qca_btsoc_type soc_type, u32 soc_ver,
> +		   const char *firmware_name)
>  {
>  	struct rome_config config;
>  	int err;
> @@ -365,7 +366,10 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t 
> baudrate,
> 
>  	/* Download NVM configuration */
>  	config.type = TLV_TYPE_NVM;
> -	if (qca_is_wcn399x(soc_type))
> +	if (firmware_name)
> +		snprintf(config.fwname, sizeof(config.fwname),
> +			 "qca/%s", firmware_name);
> +	else if (qca_is_wcn399x(soc_type))
>  		snprintf(config.fwname, sizeof(config.fwname),
>  			 "qca/crnv%02x.bin", rom_ver);
>  	else
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
> index 4c4fe2b..8c037bb 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -140,7 +140,8 @@ enum qca_btsoc_type {
> 
>  int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
>  int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> -		   enum qca_btsoc_type soc_type, u32 soc_ver);
> +		   enum qca_btsoc_type soc_type, u32 soc_ver,
> +		   const char *firmware_name);
>  int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
>  int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
>  static inline bool qca_is_wcn399x(enum qca_btsoc_type soc_type)
> @@ -155,7 +156,8 @@ static inline int qca_set_bdaddr_rome(struct
> hci_dev *hdev, const bdaddr_t *bdad
>  }
> 
>  static inline int qca_uart_setup(struct hci_dev *hdev, uint8_t 
> baudrate,
> -				 enum qca_btsoc_type soc_type, u32 soc_ver)
> +				 enum qca_btsoc_type soc_type, u32 soc_ver,
> +				 const char *firmware_name)
>  {
>  	return -EOPNOTSUPP;
>  }
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index 57322c4..05ee0a1 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -169,6 +169,7 @@ struct qca_serdev {
>  	struct qca_power *bt_power;
>  	u32 init_speed;
>  	u32 oper_speed;
> +	const char *firmware_name;
>  };
> 
>  static int qca_power_setup(struct hci_uart *hu, bool on);
> @@ -190,6 +191,17 @@ static enum qca_btsoc_type qca_soc_type(struct
> hci_uart *hu)
>  	return soc_type;
>  }
> 
> +static const char *qca_get_firmware_name(struct hci_uart *hu)
> +{
> +	if (hu->serdev) {
> +		struct qca_serdev *qsd = serdev_device_get_drvdata(hu->serdev);
> +
> +		return qsd->firmware_name;
> +	} else {
> +		return NULL;
> +	}
> +}
> +
>  static void __serial_clock_on(struct tty_struct *tty)
>  {
>  	/* TODO: Some chipset requires to enable UART clock on client
> @@ -1195,6 +1207,7 @@ static int qca_setup(struct hci_uart *hu)
>  	struct qca_data *qca = hu->priv;
>  	unsigned int speed, qca_baudrate = QCA_BAUDRATE_115200;
>  	enum qca_btsoc_type soc_type = qca_soc_type(hu);
> +	const char *firmware_name = qca_get_firmware_name(hu);
>  	int ret;
>  	int soc_ver = 0;
> 
> @@ -1245,7 +1258,8 @@ static int qca_setup(struct hci_uart *hu)
> 
>  	bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
>  	/* Setup patch / NVM configurations */
> -	ret = qca_uart_setup(hdev, qca_baudrate, soc_type, soc_ver);
> +	ret = qca_uart_setup(hdev, qca_baudrate, soc_type, soc_ver,
> +			firmware_name);
>  	if (!ret) {
>  		set_bit(QCA_IBS_ENABLED, &qca->flags);
>  		qca_debugfs_init(hdev);
> @@ -1439,6 +1453,8 @@ static int qca_serdev_probe(struct serdev_device 
> *serdev)
>  	qcadev->serdev_hu.serdev = serdev;
>  	data = of_device_get_match_data(&serdev->dev);
>  	serdev_device_set_drvdata(serdev, qcadev);
> +	device_property_read_string(&serdev->dev, "firmware-name",
> +					 &qcadev->firmware_name);
>  	if (data && qca_is_wcn399x(data->soc_type)) {
>  		qcadev->btsoc_type = data->soc_type;
>  		qcadev->bt_power = devm_kzalloc(&serdev->dev,
Tested for WCN3998.

Tested-by: Harish Bandi <c-hbandi@codeaurora.org>

Thanks,
Harish