From: Stefan Borggraefe <stefan@spybot.info>
To: "Mathias Burén" <mathias.buren@gmail.com>
Cc: Linux-RAID <linux-raid@vger.kernel.org>
Subject: Re: Help with recovering a RAID5 array
Date: Thu, 02 May 2013 15:14:27 +0200 [thread overview]
Message-ID: <2322111.Fd18rzrueQ@chablis> (raw)
In-Reply-To: <CADNH=7Gfx-HV7j-kwLOwQydcGRoXyt-1f4JjoYg1NoiTLO4p=w@mail.gmail.com>
Am Donnerstag, 2. Mai 2013, 13:30:22 schrieb Mathias Burén:
> I won't scold you for using RAID5 instead of RAID6 with this number of
> if drives and especially the size of the drives.
>
> Could you please post the output of smartctl -a for each device? (from
> smartmontools)
>
> That way we can verify which HDDs are broken, before proceeding.
>
> Mathias
Hello Mathias,
RAID6 would have been the safer option clearly, but we needed the
extra-space and only had this number of drives available.
Here the requested output:
smartctl -a /dev/sdc
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-37-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
Vendor: Hitachi
Product: HUS724040ALE640
Revision: MJAO
User Capacity: 4.000.787.030.016 bytes [4,00 TB]
Logical block size: 512 bytes
Logical Unit id: 0x5000cca22bd08a85
Serial number: PK2331PAH5D0YT
Device type: disk
Local Time is: Thu May 2 15:09:16 2013 CEST
Device supports SMART and is Enabled
Temperature Warning Disabled or Not Supported
SMART Health Status: OK
Current Drive Temperature: <not available>
Error Counter logging not supported
Device does not support Self Test logging
smartctl -a /dev/sdd
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-37-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
Vendor: Hitachi
Product: HUS724040ALE640
Revision: MJAO
User Capacity: 4.000.787.030.016 bytes [4,00 TB]
Logical block size: 512 bytes
Logical Unit id: 0x5000cca22bc3effb
Serial number: PK2331PAG8NHZT
Device type: disk
Local Time is: Thu May 2 15:09:19 2013 CEST
Device supports SMART and is Enabled
Temperature Warning Disabled or Not Supported
SMART Health Status: OK
Current Drive Temperature: <not available>
Error Counter logging not supported
Device does not support Self Test logging
smartctl -a /dev/sde
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-37-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
Vendor: Hitachi
Product: HUS724040ALE640
Revision: MJAO
User Capacity: 4.000.787.030.016 bytes [4,00 TB]
Logical block size: 512 bytes
Logical Unit id: 0x5000cca22bc3ff79
Serial number: PK2331PAG8TMXT
Device type: disk
Local Time is: Thu May 2 15:09:23 2013 CEST
Device supports SMART and is Enabled
Temperature Warning Disabled or Not Supported
SMART Health Status: OK
Current Drive Temperature: <not available>
Error Counter logging not supported
Device does not support Self Test logging
smartctl -a /dev/sdf
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-37-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
Vendor: Hitachi
Product: HUS724040ALE640
Revision: MJAO
User Capacity: 4.000.787.030.016 bytes [4,00 TB]
Logical block size: 512 bytes
^[[3~Logical Unit id: 0x5000cca22bc419ef
Serial number: PK2331PAG90PET
Device type: disk
Local Time is: Thu May 2 15:09:25 2013 CEST
Device supports SMART and is Enabled
Temperature Warning Disabled or Not Supported
SMART Health Status: OK
Current Drive Temperature: <not available>
Error Counter logging not supported
Device does not support Self Test logging
smartctl -a /dev/sdg
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-37-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
Vendor: Hitachi
Product: HUS724040ALE640
Revision: MJAO
User Capacity: 4.000.787.030.016 bytes [4,00 TB]
Logical block size: 512 bytes
Logical Unit id: 0x5000cca22bc2fe51
Serial number: PK2331PAG6L49T
Device type: disk
Local Time is: Thu May 2 15:09:27 2013 CEST
Device supports SMART and is Enabled
Temperature Warning Disabled or Not Supported
SMART Health Status: OK
Current Drive Temperature: <not available>
Error Counter logging not supported
Device does not support Self Test logging
smartctl -a /dev/sdh
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-37-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
Vendor: Hitachi
Product: HUS724040ALE640
Revision: MJAO
User Capacity: 4.000.787.030.016 bytes [4,00 TB]
Logical block size: 512 bytes
Logical Unit id: 0x5000cca22bc2fe2d
Serial number: PK2331PAG6L34T
Device type: disk
Local Time is: Thu May 2 15:09:30 2013 CEST
Device supports SMART and is Enabled
Temperature Warning Disabled or Not Supported
SMART Health Status: OK
Current Drive Temperature: <not available>
Error Counter logging not supported
Device does not support Self Test logging
--
Best regards,
Stefan Borggraefe
--
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-05-02 13:14 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-02 12:24 Help with recovering a RAID5 array Stefan Borggraefe
2013-05-02 12:30 ` Mathias Burén
2013-05-02 13:14 ` Stefan Borggraefe [this message]
2013-05-02 13:17 ` Mathias Burén
2013-05-02 13:29 ` Stefan Borggraefe
2013-05-02 13:49 ` Mathias Burén
2013-05-02 14:17 ` Stefan Borggraefe
2013-05-03 8:38 ` Ole Tange
2013-05-04 11:13 ` Stefan Borggraefe
2013-05-06 6:31 ` NeilBrown
2013-05-06 8:12 ` Stefan Borggraefe
2013-05-10 10:14 ` Stefan Borggraefe
2013-05-10 10:48 ` NeilBrown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2322111.Fd18rzrueQ@chablis \
--to=stefan@spybot.info \
--cc=linux-raid@vger.kernel.org \
--cc=mathias.buren@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.