From mboxrd@z Thu Jan 1 00:00:00 1970 From: Nathaniel J Villaume Message-ID: <23fcc723d285.23d28523fcc7@domain.hid> Date: Wed, 01 Feb 2006 20:02:05 -0800 MIME-Version: 1.0 Content-Language: en Subject: Re: [Xenomai-help] Dual Xeon 2.6.13 SMP config problem Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: 7bit List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Jeroen Van den Keybus Cc: xenomai@xenomai.org Hi, It turns out that I had to upgrade the mkinitrd package. The one that comes with FC3 doesn't build the image correctly for SMP. That said, I now can build and boot a vanilla 2.6.15 kernel, but when I try to boot the ipipe-patched kernel, I get the following error near the end of the boot-sequence: ( I thought it was an X-server problem it comes so late, but then I booted to init level 3, and I get the same thing) hda: dma_timer_expiry dma_status == 0x24 hda: dma: int recovery hda: lost interrupt Then the kernel hangs. (Num Lock key doesn't make the lights blink.) The configs have two differences: (seriously) 1) The dates are different, 2) ipipe is included in the failing kernel. I would like to know if there are any other tests I can do to isolate the cause of this failure. I appreciate any comments, Nate