From: Mark Carbonaro <mark@carbonaro.org>
To: Jonathan Hummel <jhhummel@bigpond.com>
Cc: linux dvb mailing list <linux-dvb@linuxtv.org>
Subject: Re: [linux-dvb] Leadtek Winfast PxDVR 3200 H
Date: Sat, 2 Aug 2008 21:21:21 +1000 (EST) [thread overview]
Message-ID: <24636158.81217676433289.JavaMail.mark@trogdor.carbonaro.org> (raw)
In-Reply-To: <9678479.61217676240039.JavaMail.mark@trogdor.carbonaro.org>
Hi Jon,
I just added some photos to the wiki that I took of my 3200 about a month ago, it's just some close ups of the chips. I forgot all about them until you posted this message, figured I should probably pull my finger out and upload them.
I haven't taken the shielding off the card, I can only assume there is a tuner in there, I will crack it open on of these days and take note (and photos) of what is inside.
Mark
----- Original Message -----
From: "Jonathan Hummel" <jhhummel@bigpond.com>
To: stev391@email.com
Cc: "linux dvb mailing list" <linux-dvb@linuxtv.org>
Sent: Saturday, 2 August, 2008 5:43:45 PM (GMT+1000) Auto-Detected
Subject: Re: [linux-dvb] Leadtek Winfast PxDVR 3200 H
Hi Stephen
There was already a page of sorts:
http://www.linuxtv.org/wiki/index.php/Leadtek_Winfast_PxDVR_3200_H
I've added to it. I don't have winodws on that machine, but it apears
someone has done that for me already.
I have some more photos, of even higher res is you want them, but won't
clutter up everyone's inbox if not need/ wanted.
Cheers
Jon
On Mon, 2008-07-28 at 08:55 +1000, stev391@email.com wrote:
> Jon,
>
> It appears that this card uses the CX23885 PCIe controller.
>
> From initial research on the Leadtek site it appears that this card
> utilises the following main chips:
> Conexant CX23885 - PCIe Interface
> Conexant CX23417 - Analog Video to MPEG2 Encoder
> Intel CE6353 - Digital TV Demodulator (Formerly known as Zarlink
> 10353)
> Xceive ????? - Digital TV Tuner,
>
> All of the above that I have identified have drivers in linux in
> various stages of development.
>
> Can you take a high res photo of the card showing all chip IDs?
> Can you identify which tuner from Xceive it is?
> Do you have a partition set up with windows and the card working?
> If so can you use regspy (Google "Dscaler Regspy" to find the
> correct program), and record what the values are for:
> - Card sitting idle straight after bootup
> - Watching Digital TV
> - Watching Analog TV
> - Sitting idle after watching TV
>
> What is the output of `lspci -vnn` when in linux regarding this card?
>
> What does `dmesg | grep cx23885` give you?
>
> It might also be useful for others who have this card if you make an
> entry the linuxtv wiki for this card, with all of the information that
> I have requested linked to or included.
>
> I may be able to knock up a driver that you can use for the digital TV
> side as this seems similar to other existing cards, I'm not familiar
> with the Analog side though.
> (No gurantees, but it should be relatively simple to achieve).
>
> Regards,
>
> Stephen.
>
>
> --- Original Message ---
> Hi,
>
> I was wondering if anyone could help me get this card up and
> working in
> kubuntu 8.04. I've tried setting it up much like a Leadtek
> DTV2000H,
> version J, as per instructions here:
> http://wiki.linuxmce.org/index.php/Leadtek_DTV2000H
> (I've been using that card for a while in another box)
>
> System:
> Gibagyte moher board (all in one) GA-MA78GM-S2H
> AMD Athlon X2 6000 (2 core, 3GHz)
> 4G ram, heaps of hard disk
> 64bit KDE 4 kubuntu, kernel: 2.6.24-20 generic
>
> http://www.linuxtv.org/wiki/index.php/DVB-T_PCIe_Cards
> suggested I email this address.
>
>
> cheers
>
> Jon
>
>
>
>
> --
> Be Yourself @ mail.com!
> Choose From 200+ Email Addresses
> Get a Free Account at www.mail.com!
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next parent reply other threads:[~2008-08-02 11:27 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <9678479.61217676240039.JavaMail.mark@trogdor.carbonaro.org>
2008-08-02 11:21 ` Mark Carbonaro [this message]
2008-08-03 3:01 [linux-dvb] Leadtek Winfast PxDVR 3200 H stev391
-- strict thread matches above, loose matches on Subject: below --
2008-08-02 11:17 stev391
2008-07-27 22:55 stev391
2008-08-02 7:43 ` Jonathan Hummel
2008-07-27 5:20 Jonathan Hummel
2008-07-02 13:04 Mark Carbonaro
2008-02-07 16:37 [linux-dvb] Leadtek WinFast " Andreas Lorenz
2008-02-07 17:35 ` CityK
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=24636158.81217676433289.JavaMail.mark@trogdor.carbonaro.org \
--to=mark@carbonaro.org \
--cc=jhhummel@bigpond.com \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.