Re: [PATCH v8 0/5] Add rockchip RK808 pmic driver

["Heiko Stübner" <heiko@sntech.de>]

Am Mittwoch, 3. September 2014, 21:51:42 schrieb Chris Zhong:
> This is the initial version of the RK808 PMIC. This is a power management IC
> for multimedia products.
> 
> It provides regulators that are able to supply power to processor cores
> and other components. The chip provides other modules including RTC,
> Clockout

after fixing the glitch in patch 5, again

Tested-by: Heiko Stuebner <heiko@sntech.de>

@Chris: also please use the full name as stated above when transfering tags to 
patches. I'm sadly not unique enough to be identified only by my first name ;-)


Heiko

> 
> Changes in v8:
> Advices by Doug
> - add description about "vccn-supply"
> - modify description about clock-cells
> Adviced by Lee Jones
> - add Author
> - remove if(np) and of_match_ptr() since depend on OF
> - coding style
> Adviced by Doug
> - coding style
> - fix regmap_update_bits()
> - if(rk808_rtc->irq < 0) return err num
> Adviced by Mike
> -rename "control" to "enable"
> -define RK808_NR_OUTPUT 2
> Adviced by Doug
> - remove rk808_regulator_dts() function
> - remove the check about "client->dev.of_node"
> 
> Changes in v7:
> Advices by Mark Rutland
> - modify description about clock-cells
> - update the example
> Adviced by Lee Jones
> - coding style
> - remove rk808_pre_init function
> Adviced by Doug
> - add "&& OF" to the dependencies
> - add .init_ack_masked = true in rk808_irq_chip
> Adviced by doug
> - read rtc time from shadowed registers
> Adviced by Dmitry
> - use CONFIG_PM_SLEEP replace CONFIG_PM
> - use SIMPLE_DEV_PM_OPS replace dev_pm_ops
> - fix dev_warn
> - coding style
> Adviced by Heiko
> - remove rtc_ctl
> Adviced by doug
> -fix coding style problems
> - remove pdata struct from header file, add rk808_regulator struct
> 
> Changes in v6:
> Advices by Mark Rutland
> - add description about clock-cells
> Advices by Doug
> - modify description about regulator
> - remove pinctrl description
> Adviced by Lee Jones in v2
> - rk808_i2c_client instead of g_rk808
> - remove pdata form struct rk808
> Adviced by doug
> - move RTC_READSEL setting into probe
> Adviced by doug
> - use correct argument call of_clk_add_provider in probe
> - remove the redundant code
> 
> Changes in v5:
> Advices by Mark Brown
> - add description about regulator valid name.
> - add a header file "rockchip,rk808".
> - fixed a bug about set_time failed
> Adviced by doug
> - add some error checking in probe
> - move "rockchip,rk808.h" into the patch about dt-bindings
> - re-edit base on Mark's branch
> 
> Changes in v4:
> Advices by Doug
> - add a "#clock-cells" propertiy
> - update the example
> Adviced by Lee Jones in v2
> - modify the description in Kconfig
> - remove some unnecessary header files
> - remove dev from struct rk808
> - use enum for define RK808_ID...
> - use &client->dev replace rk808->dev
> Adviced by doug
> - add "clock-output-names" propertiey
> - add a header file "rockchip,rk808.h"
> - use &client->dev replace rk808->dev
> 
> Changes in v3:
> - fix compile err
> - fix compile err
> 
> Changes in v2:
> Adviced by Mark Browm:
> - use defines for register setting value
> - remove rtc alarm disable in shutdown
> - remove while(1) in shutdown
> - remove read 0x2f in probe
> Adviced by javier.martinez
> - Add a separate clock driver, rather than in RTC driver
> Adviced by javier.martinez
> - separated from rtc-rk808.c
> Adviced by Mark Browm:
> - change of_find_node_by_name to find_child_by_name
> - use RK808_NUM_REGULATORS as the name of the constant
> - create a pdata when missing platform data
> - use the rk808_reg name to supply_regulator name
> - replace regulator_register with devm_regulator_register
> - some other problem with coding style
> 
> Chris Zhong (5):
>   dt-bindings: Add RK808 device tree bindings document
>   MFD: RK808: Add new mfd driver for RK808
>   RTC: RK808: add RTC driver for RK808
>   clk: RK808: Add clkout driver for RK808
>   regulator: RK808: Remove pdata from the regulator
> 
>  Documentation/devicetree/bindings/mfd/rk808.txt |  177 ++++++++++
>  drivers/clk/Kconfig                             |    9 +
>  drivers/clk/Makefile                            |    1 +
>  drivers/clk/clk-rk808.c                         |  164 +++++++++
>  drivers/mfd/Kconfig                             |   13 +
>  drivers/mfd/Makefile                            |    1 +
>  drivers/mfd/rk808.c                             |  245 +++++++++++++
>  drivers/regulator/rk808-regulator.c             |   89 +----
>  drivers/rtc/Kconfig                             |   10 +
>  drivers/rtc/Makefile                            |    1 +
>  drivers/rtc/rtc-rk808.c                         |  426
> +++++++++++++++++++++++ include/dt-bindings/clock/rockchip,rk808.h      |  
> 11 +
>  include/linux/mfd/rk808.h                       |  196 +++++++++++
>  13 files changed, 1271 insertions(+), 72 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mfd/rk808.txt
>  create mode 100644 drivers/clk/clk-rk808.c
>  create mode 100644 drivers/mfd/rk808.c
>  create mode 100644 drivers/rtc/rtc-rk808.c
>  create mode 100644 include/dt-bindings/clock/rockchip,rk808.h
>  create mode 100644 include/linux/mfd/rk808.h