Re: [PATCH v5 2/5] Bluetooth: hci_qca: Deassert RTS while baudrate change command

[Balakrishna Godavarthi <bgodavar@codeaurora.org>]

Hi Matthias,

On 2019-01-19 06:01, Matthias Kaehlcke wrote:
> On Fri, Jan 18, 2019 at 10:44:16AM +0100, Johan Hovold wrote:
>> On Thu, Jan 17, 2019 at 09:21:09AM -0800, Matthias Kaehlcke wrote:
>> 
>> > I observed that the qcom_geni_serial driver doesn't raise RTS with
>> > flow control disabled. It seems we have to investigate why that's the
>> > case. I agree that the driver should be platform agnostic.
>> 
>> Sounds like a driver bug, unless the hardware is just "odd". The
>> driver implementation of this looks very non-standard judging from a
>> quick peek.
>> 
>> In fact, qcom_geni_serial_get_mctrl() is currently a no-op if hardware
>> flow control is not enabled:
>> 
>> 	if (uart_console(uport) || !uart_cts_enabled(uport))
>> 		return;
>> 
>> Perhaps dropping the !uart_cts_enabled() test is sufficient.
> 
> Thanks for taking a look Johan, that was indeed the problem (also
> in set_mctrl()). I posted a fix:
> https://lore.kernel.org/patchwork/patch/1033611/
> 
> Balakrishna, the following (applied on top of your patch) works for me
> with the UART patch above:
> 

[Bala]: will test and update BT patch accordingly.


> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index 9d5e41f159c78f..60bfdf01f72841 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -1080,7 +1080,7 @@ static int qca_set_speed(struct hci_uart *hu,
> enum qca_speed_type speed_type)
>  {
>  	unsigned int speed, qca_baudrate;
>  	struct qca_serdev *qcadev;
> -	int ret;
> +	int ret = 0;
> 
>  	if (speed_type == QCA_INIT_SPEED) {
>  		speed = qca_get_speed(hu, QCA_INIT_SPEED);
> @@ -1097,22 +1097,27 @@ static int qca_set_speed(struct hci_uart *hu,
> enum qca_speed_type speed_type)
>  		 * the old speed.
>  		 */
>  		qcadev = serdev_device_get_drvdata(hu->serdev);
> -		if (qcadev->btsoc_type == QCA_WCN3990)
> +		if (qcadev->btsoc_type == QCA_WCN3990) {
> +			hci_uart_set_flow_control(hu, true);
>  			serdev_device_set_rts(hu->serdev, false);
> +		}
> 
>  		qca_baudrate = qca_get_baudrate_value(speed);
>  		bt_dev_dbg(hu->hdev, "Set UART speed to %d", speed);
>  		ret = qca_set_baudrate(hu->hdev, qca_baudrate);
>  		if (ret)
> -			return ret;
> +			goto out;
> 
>  		host_set_baudrate(hu, speed);
> 
> -		if (qcadev->btsoc_type == QCA_WCN3990)
> +out:
> +		if (qcadev->btsoc_type == QCA_WCN3990) {
> +			hci_uart_set_flow_control(hu, false);
>  			serdev_device_set_rts(hu->serdev, true);
> +		}
>  	}
> 
> -	return 0;
> +	return ret;
>  }
> 
>  static int qca_wcn3990_init(struct hci_uart *hu)

-- 
Regards
Balakrishna.