From: devzero@web.de
To: werner@copaya.yi.org
Cc: linux-kernel@vger.kernel.org
Subject: Re: EDD problem -- regression -- crash on booting by probing EDD
Date: Wed, 23 Apr 2008 09:39:36 +0200 [thread overview]
Message-ID: <250404281@web.de> (raw)
Hi !
>As I tested yesterday extensively, the problem wasn't present at 2.6.24-rc5-git6 (SYS \
>Linux 0.17 install DVD) nor at 2.6.24-rc6-git2 (SYS 0.19) , but at 2.6.24-rc6-git8 \
>(SYS 0.20-rc1 and 0.20-rc2) and 2.6.25 (0.21-r3).
any chance to git-bisect that further, to find the single commit which broke your kernel?
regards
roland
List: linux-kernel
Subject: Re: EDD problem -- regression -- crash on booting by probing EDD
From: "werner" <werner () copaya ! yi ! org>
Date: 2008-04-23 0:20:44
Message-ID: 1208910044.20701 () copaya ! yi ! org
[Download message RAW]
As I tested yesterday extensively, the problem wasn't present at 2.6.24-rc5-git6 (SYS \
Linux 0.17 install DVD) nor at 2.6.24-rc6-git2 (SYS 0.19) , but at 2.6.24-rc6-git8 \
(SYS 0.20-rc1 and 0.20-rc2) and 2.6.25 (0.21-r3).
The whole compiled packages of these kernels still are at copaya.yi.org/tgz , but I \
extracted the important parts, see enclosed here. The .tar.bz2 file contains the \
config and the protocoll of the compilation (inclusive warning / error messages).
As you can see, the diff between the config of 2.6.24-rc6-git2 and -git8 is nothing. \
That means: THE ERROR ENTERED INTO THE KERNEL BETWEEN THESE TWO GITs !!
You may also analyze the error/warning messages. Please observe that the error \
message just at the beginning was already subject of another reclamation mine \
together with another person, and seems to have be corrected.
I inform still about the following: As I make many experients and also install \
Linux often for firnds and neighbours, I see steady-steady some kernel errors, but \
have normally no time to track them, in the house of the persons. That error here, I \
saw already several times, and never it helped the edd=off option. Yesterday it \
happened that a friend brought a laptop (ACER Aspire 7004WSMi) to me, after he was \
unsuccessfull to install SYS 0.21-r3 dvd with 2.6.25-rc7 . Then I tracked that \
problem during about 5 hours, inclusively trying a lot of different kernel options. \
edd=off don't work at all, with no of the affected kernels. With 2.6.24-rc6-git2 and \
earlier kernels the problem didnt appear, even without edd=off option, and with the \
later kernels it appears, even with edd=off . With pci=off , also the recent \
kernels boots -- but this is useless because the system don't find any hard disk. \
acpi=off or hwprobe=off have no influence on that problem.
Pls search that error and repair it !
********** YOU SHOULD MAKE AN EXTRA KERNEL OPTION, WHAT IGNORES THE HARDWARE AND \
CONTINUES TO BOOT, like pci=off, BUT WHAT DETECTS CD ROMS, HARD DISKS SATA / IDE / \
RAID , AND WHAT PERMITS TO USE THE COMPUTER NORMALLY AT LEAST IN VESA-FB OR FBDEV \
MODE !!!!! *************
As there has no other solution, I released last night SYS 0.21-r4 DVD , what contains \
both, the 2.6.25 , and alternatively 2.6.24-rc6-git2 , so that people can use them \
computer anyway / anyhow : ftp://ftp5.gwdg.de/pub/linux/install/sys/
I can put the suggested debug, generally, in the kernel command line of my SYS \
install DVD. However, the person gone with his laptop so that at the moment I cannot \
test it; I have to wait if the same problem occurs on another computer.
_________________________________________________________________________
In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und gestalten!
Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc=021114
next reply other threads:[~2008-04-23 7:39 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-23 7:39 devzero [this message]
-- strict thread matches above, loose matches on Subject: below --
2008-04-21 16:02 EDD problem -- regression -- crash on booting by probing EDD werner
2008-04-20 22:33 werner
2008-04-22 13:28 ` Andrew Morton
2008-04-22 14:21 ` Matt Domsch
2008-04-23 0:20 ` werner
2008-04-23 15:35 ` Randy Dunlap
2008-04-26 23:17 ` Matt Domsch
2008-04-28 2:31 ` Randy Dunlap
2008-04-25 16:04 ` Randy Dunlap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=250404281@web.de \
--to=devzero@web.de \
--cc=linux-kernel@vger.kernel.org \
--cc=werner@copaya.yi.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.