From: SlinceArm <slincearm@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] ERROR: too many flash sectors
Date: Thu, 20 Aug 2009 07:45:28 -0700 (PDT) [thread overview]
Message-ID: <25063511.post@talk.nabble.com> (raw)
Hi , everyone .
My u-boot version is 2009-01 and i try porting u-boot on pxa270 development
board.
when i power on my board then minicom show these information
DRAM: 64 MB
ERROR: too many flash sectors
ERROR: too many flash sectors
Flash: 32 MB
then i can save setenv , but when i earse my flash ,it cause one error
Error: end address not on sector boundary
and here is my flinfo :
Bank # 1: CFI conformant FLASH (32 x 16) Size: 32 MB in 128 Sectors
Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x18
Erase timeout: 4096 ms, write timeout: 1 ms
Buffer write timeout: 2 ms, buffer size: 64 bytes
Sector Start Addresses:
00000000 RO 00040000 RO 00080000 RO 000C0000 RO 00100000
RO
etc...
And i dont know my network chip work or not . ( my chip is LAN91C113 )
when i ping some address , it show
ethid=0000...
LAN91C113:PHY auto-negotiate timed out
then my bootloader freeze ....
would someone can help me ? thanks.
--
View this message in context: http://www.nabble.com/-U-Boot--ERROR%3A-too-many-flash-sectors-tp25063511p25063511.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
next reply other threads:[~2009-08-20 14:45 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-20 14:45 SlinceArm [this message]
2009-08-20 14:58 ` [U-Boot] ERROR: too many flash sectors Stefan Roese
2009-08-22 2:58 ` SlinceArm
2009-08-23 16:15 ` Penda, Naveen Kumar
2009-08-24 8:57 ` Stefan Roese
2009-08-24 14:39 ` SlinceArm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=25063511.post@talk.nabble.com \
--to=slincearm@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.