diff for duplicates of <2512132.nlEddb7eKN@avalon> diff --git a/a/content_digest b/N1/content_digest index 1326f82..d473322 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -4,7 +4,7 @@ "From\0laurent.pinchart@ideasonboard.com (Laurent Pinchart)\0" "Subject\0[PATCH 2/4] ARM64: dts: meson-gx: Add Graphic Controller nodes\0" "Date\0Tue, 29 Nov 2016 21:19:48 +0200\0" - "To\0linus-amlogic@lists.infradead.org\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "Hi Neil,\n" @@ -255,4 +255,4 @@ "\n" Laurent Pinchart -6115ec01acac45b25abfe286c74fd6d31245b9a03465f32f9ecc3ba035fd60f1 +ac0437d74e415345eaa2f276f6fc2aeb18108e12367644e96b739104097f19a3
diff --git a/a/1.txt b/N2/1.txt index 4cc6780..d96b10b 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -5,7 +5,7 @@ On Tuesday 29 Nov 2016 21:16:17 Laurent Pinchart wrote: > > Add Video Processing Unit and CVBS Output nodes, and enable CVBS on > > selected boards. > > -> > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> +> > Signed-off-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org> > > --- > > > > arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 46 +++++++++++++++++ @@ -41,7 +41,7 @@ node to model the video encoder as it's part of the VPU ? > > + #address-cells = <1>; > > + #size-cells = <0>; > > + -> > + venc_cvbs_in: port at 0 { +> > + venc_cvbs_in: port@0 { > > Nitpicking, you don't need a label here as ports are never referenced by > phandle. Same for the vpu node below. @@ -50,7 +50,7 @@ node to model the video encoder as it's part of the VPU ? > > + #size-cells = <0>; > > + reg = <0>; > > + -> > + venc_cvbs_in_vpu: endpoint at 0 { +> > + venc_cvbs_in_vpu: endpoint@0 { > > + reg = <0>; > > And there's no requirement to number the endpoint if there's a single one of @@ -82,7 +82,7 @@ Shouldn't the above node be placed inside the soc ? > > }; > > > > + -> > + vpu: vpu at d0100000 { +> > + vpu: vpu@d0100000 { > > + compatible = "amlogic,meson-gx-vpu"; > > + reg = <0x0 0xd0100000 0x0 0x100000>, > > + <0x0 0xc883c000 0x0 0x1000>, @@ -94,12 +94,12 @@ Shouldn't the above node be placed inside the soc ? > > + #address-cells = <1>; > > + #size-cells = <0>; > > + -> > + vpu_out: port at 1 { +> > + vpu_out: port@1 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <1>; > > + -> > + vpu_out_venc_cvbs: endpoint at 0 { +> > + vpu_out_venc_cvbs: endpoint@0 { > > + reg = <0>; > > + remote-endpoint = > @@ -245,3 +245,8 @@ Shouldn't the above node be placed inside the soc ? Regards, Laurent Pinchart + +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N2/content_digest index 1326f82..5e65d81 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -1,10 +1,22 @@ "ref\01480416469-9655-1-git-send-email-narmstrong@baylibre.com\0" "ref\01480416469-9655-3-git-send-email-narmstrong@baylibre.com\0" "ref\01812737.pZP73QSyU1@avalon\0" - "From\0laurent.pinchart@ideasonboard.com (Laurent Pinchart)\0" - "Subject\0[PATCH 2/4] ARM64: dts: meson-gx: Add Graphic Controller nodes\0" + "From\0Laurent Pinchart <laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>\0" + "Subject\0Re: [PATCH 2/4] ARM64: dts: meson-gx: Add Graphic Controller nodes\0" "Date\0Tue, 29 Nov 2016 21:19:48 +0200\0" - "To\0linus-amlogic@lists.infradead.org\0" + "To\0Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>\0" + "Cc\0airlied-cv59FeDIM0c@public.gmane.org" + khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org + carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org + dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org + linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org + linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org + linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + victor.wan-LpR1jeaWuhtBDgjK7y7TUQ@public.gmane.org + jerry.cao-LpR1jeaWuhtBDgjK7y7TUQ@public.gmane.org + Xing.Xu-LpR1jeaWuhtBDgjK7y7TUQ@public.gmane.org + devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + " daniel-/w4YWyX8dFk@public.gmane.org\0" "\00:1\0" "b\0" "Hi Neil,\n" @@ -14,7 +26,7 @@ "> > Add Video Processing Unit and CVBS Output nodes, and enable CVBS on\n" "> > selected boards.\n" "> > \n" - "> > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>\n" + "> > Signed-off-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>\n" "> > ---\n" "> > \n" "> > arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 46 +++++++++++++++++\n" @@ -50,7 +62,7 @@ "> > +\t\t\t#address-cells = <1>;\n" "> > +\t\t\t#size-cells = <0>;\n" "> > +\n" - "> > +\t\t\tvenc_cvbs_in: port at 0 {\n" + "> > +\t\t\tvenc_cvbs_in: port@0 {\n" "> \n" "> Nitpicking, you don't need a label here as ports are never referenced by\n" "> phandle. Same for the vpu node below.\n" @@ -59,7 +71,7 @@ "> > +\t\t\t\t #size-cells = <0>;\n" "> > +\t\t\t\t reg = <0>;\n" "> > +\n" - "> > +\t\t\t\t venc_cvbs_in_vpu: endpoint at 0 {\n" + "> > +\t\t\t\t venc_cvbs_in_vpu: endpoint@0 {\n" "> > +\t\t\t\t\t reg = <0>;\n" "> \n" "> And there's no requirement to number the endpoint if there's a single one of\n" @@ -91,7 +103,7 @@ "> > \t\t};\n" "> > \n" "> > +\n" - "> > +\t\tvpu: vpu at d0100000 {\n" + "> > +\t\tvpu: vpu@d0100000 {\n" "> > +\t\t\tcompatible = \"amlogic,meson-gx-vpu\";\n" "> > +\t\t\treg = <0x0 0xd0100000 0x0 0x100000>,\n" "> > +\t\t\t <0x0 0xc883c000 0x0 0x1000>,\n" @@ -103,12 +115,12 @@ "> > +\t\t\t\t#address-cells = <1>;\n" "> > +\t\t\t\t#size-cells = <0>;\n" "> > +\n" - "> > +\t\t\t\tvpu_out: port at 1 {\n" + "> > +\t\t\t\tvpu_out: port@1 {\n" "> > +\t\t\t\t\t#address-cells = <1>;\n" "> > +\t\t\t\t\t#size-cells = <0>;\n" "> > +\t\t\t\t\treg = <1>;\n" "> > +\n" - "> > +\t\t\t\t\tvpu_out_venc_cvbs: endpoint at 0 {\n" + "> > +\t\t\t\t\tvpu_out_venc_cvbs: endpoint@0 {\n" "> > +\t\t\t\t\t\treg = <0>;\n" "> > +\t\t\t\t\t\tremote-endpoint =\n" "> \n" @@ -253,6 +265,11 @@ "-- \n" "Regards,\n" "\n" - Laurent Pinchart + "Laurent Pinchart\n" + "\n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -6115ec01acac45b25abfe286c74fd6d31245b9a03465f32f9ecc3ba035fd60f1 +a0e557fcaf445157d5bd5665d9ea726408d51d825f8d78384fdad00dfa01dbad
diff --git a/a/1.txt b/N3/1.txt index 4cc6780..2bc22bd 100644 --- a/a/1.txt +++ b/N3/1.txt @@ -41,7 +41,7 @@ node to model the video encoder as it's part of the VPU ? > > + #address-cells = <1>; > > + #size-cells = <0>; > > + -> > + venc_cvbs_in: port at 0 { +> > + venc_cvbs_in: port@0 { > > Nitpicking, you don't need a label here as ports are never referenced by > phandle. Same for the vpu node below. @@ -50,7 +50,7 @@ node to model the video encoder as it's part of the VPU ? > > + #size-cells = <0>; > > + reg = <0>; > > + -> > + venc_cvbs_in_vpu: endpoint at 0 { +> > + venc_cvbs_in_vpu: endpoint@0 { > > + reg = <0>; > > And there's no requirement to number the endpoint if there's a single one of @@ -82,7 +82,7 @@ Shouldn't the above node be placed inside the soc ? > > }; > > > > + -> > + vpu: vpu at d0100000 { +> > + vpu: vpu@d0100000 { > > + compatible = "amlogic,meson-gx-vpu"; > > + reg = <0x0 0xd0100000 0x0 0x100000>, > > + <0x0 0xc883c000 0x0 0x1000>, @@ -94,12 +94,12 @@ Shouldn't the above node be placed inside the soc ? > > + #address-cells = <1>; > > + #size-cells = <0>; > > + -> > + vpu_out: port at 1 { +> > + vpu_out: port@1 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <1>; > > + -> > + vpu_out_venc_cvbs: endpoint at 0 { +> > + vpu_out_venc_cvbs: endpoint@0 { > > + reg = <0>; > > + remote-endpoint = > diff --git a/a/content_digest b/N3/content_digest index 1326f82..f583a76 100644 --- a/a/content_digest +++ b/N3/content_digest @@ -1,10 +1,22 @@ "ref\01480416469-9655-1-git-send-email-narmstrong@baylibre.com\0" "ref\01480416469-9655-3-git-send-email-narmstrong@baylibre.com\0" "ref\01812737.pZP73QSyU1@avalon\0" - "From\0laurent.pinchart@ideasonboard.com (Laurent Pinchart)\0" - "Subject\0[PATCH 2/4] ARM64: dts: meson-gx: Add Graphic Controller nodes\0" + "From\0Laurent Pinchart <laurent.pinchart@ideasonboard.com>\0" + "Subject\0Re: [PATCH 2/4] ARM64: dts: meson-gx: Add Graphic Controller nodes\0" "Date\0Tue, 29 Nov 2016 21:19:48 +0200\0" - "To\0linus-amlogic@lists.infradead.org\0" + "To\0Neil Armstrong <narmstrong@baylibre.com>\0" + "Cc\0airlied@linux.ie" + khilman@baylibre.com + carlo@caione.org + dri-devel@lists.freedesktop.org + linux-amlogic@lists.infradead.org + linux-arm-kernel@lists.infradead.org + linux-kernel@vger.kernel.org + victor.wan@amlogic.com + jerry.cao@amlogic.com + Xing.Xu@amlogic.com + devicetree@vger.kernel.org + " daniel@ffwll.ch\0" "\00:1\0" "b\0" "Hi Neil,\n" @@ -50,7 +62,7 @@ "> > +\t\t\t#address-cells = <1>;\n" "> > +\t\t\t#size-cells = <0>;\n" "> > +\n" - "> > +\t\t\tvenc_cvbs_in: port at 0 {\n" + "> > +\t\t\tvenc_cvbs_in: port@0 {\n" "> \n" "> Nitpicking, you don't need a label here as ports are never referenced by\n" "> phandle. Same for the vpu node below.\n" @@ -59,7 +71,7 @@ "> > +\t\t\t\t #size-cells = <0>;\n" "> > +\t\t\t\t reg = <0>;\n" "> > +\n" - "> > +\t\t\t\t venc_cvbs_in_vpu: endpoint at 0 {\n" + "> > +\t\t\t\t venc_cvbs_in_vpu: endpoint@0 {\n" "> > +\t\t\t\t\t reg = <0>;\n" "> \n" "> And there's no requirement to number the endpoint if there's a single one of\n" @@ -91,7 +103,7 @@ "> > \t\t};\n" "> > \n" "> > +\n" - "> > +\t\tvpu: vpu at d0100000 {\n" + "> > +\t\tvpu: vpu@d0100000 {\n" "> > +\t\t\tcompatible = \"amlogic,meson-gx-vpu\";\n" "> > +\t\t\treg = <0x0 0xd0100000 0x0 0x100000>,\n" "> > +\t\t\t <0x0 0xc883c000 0x0 0x1000>,\n" @@ -103,12 +115,12 @@ "> > +\t\t\t\t#address-cells = <1>;\n" "> > +\t\t\t\t#size-cells = <0>;\n" "> > +\n" - "> > +\t\t\t\tvpu_out: port at 1 {\n" + "> > +\t\t\t\tvpu_out: port@1 {\n" "> > +\t\t\t\t\t#address-cells = <1>;\n" "> > +\t\t\t\t\t#size-cells = <0>;\n" "> > +\t\t\t\t\treg = <1>;\n" "> > +\n" - "> > +\t\t\t\t\tvpu_out_venc_cvbs: endpoint at 0 {\n" + "> > +\t\t\t\t\tvpu_out_venc_cvbs: endpoint@0 {\n" "> > +\t\t\t\t\t\treg = <0>;\n" "> > +\t\t\t\t\t\tremote-endpoint =\n" "> \n" @@ -255,4 +267,4 @@ "\n" Laurent Pinchart -6115ec01acac45b25abfe286c74fd6d31245b9a03465f32f9ecc3ba035fd60f1 +5a9fdd4bbb82773355775534352280387990738b07b3ed9e649414cd08e19f66
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.