All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: linux-media@vger.kernel.org, a.hajda@samsung.com,
	sakari.ailus@iki.fi, hverkuil@xs4all.nl,
	kyungmin.park@samsung.com, sw0312.kim@samsung.com
Subject: Re: [PATCH RFC v2 0/5] s5p-fimc: Add interleaved image data capture support
Date: Tue, 25 Sep 2012 13:37:06 +0200	[thread overview]
Message-ID: <2532715.t0qPncDtcZ@avalon> (raw)
In-Reply-To: <1348498546-2652-1-git-send-email-s.nawrocki@samsung.com>

Hi Sylwester,

On Monday 24 September 2012 16:55:41 Sylwester Nawrocki wrote:
> Hi All,
> 
> This patch series adds device/vendor specific media bus pixel code section
> and defines S5C73MX camera specific media bus pixel code, along with
> corresponding fourcc. I realize this isn't probably the best possible
> solution but I don't know how to better handle this without major changes
> in V4L2 API.

Well, given that the format is highly specific to your hardware, I don't think 
it's such a bad solution. It actually looks OK to me.

> The third patch adds support for MIPI-CSI2 Embedded Data capture in
> Samsung S5P/Exynos MIPI-CSIS device. It depends on patch
> "[PATCH RFC] V4L: Add s_rx_buffer subdev video operation".
> 
> The fourth patch extends s5p-fimc driver to allow it to support
> 2-planar V4L2_PIX_FMT_S5C_UYVY_JPG format. More details can be found
> in the patch summary. The [get/set]_frame_desc subdev callback are
> used only to retrive from a sensor subdev required buffer size.
> It depends on patch
> "[PATCH RFC] V4L: Add get/set_frame_desc subdev callbacks"
> 
> The fifth patch adds [get/set]_frame_desc op handlers to the m5mols
> driver as an example. I prepared also similar patch for S5C73M3
> sensor where 2 frame description entries are used, but that driver
> is not yet mainlined due to a few missing items in V4L2 required
> to fully control it, so I didn't include that patch in this series.
> 
> Comments, suggestions welcome.
> 
> Thanks,
> Sylwester
> 
> Sylwester Nawrocki (5):
>   V4L: Add V4L2_MBUS_FMT_S5C_UYVY_JPEG_1X8 media bus format
>   V4L: Add V4L2_PIX_FMT_S5C_UYVY_JPG fourcc definition
>   s5p-csis: Add support for non-image data packets capture
>   s5p-fimc: Add support for V4L2_PIX_FMT_S5C_UYVY_JPG fourcc
>   m5mols: Implement .get_frame_desc subdev callback
> 
>  Documentation/DocBook/media/v4l/compat.xml         |   4 +
>  Documentation/DocBook/media/v4l/pixfmt.xml         |   9 ++
>  Documentation/DocBook/media/v4l/subdev-formats.xml |  45 ++++++++
>  drivers/media/i2c/m5mols/m5mols.h                  |   9 ++
>  drivers/media/i2c/m5mols/m5mols_capture.c          |   3 +
>  drivers/media/i2c/m5mols/m5mols_core.c             |  47 ++++++++
>  drivers/media/i2c/m5mols/m5mols_reg.h              |   1 +
>  drivers/media/platform/s5p-fimc/fimc-capture.c     | 128 +++++++++++++++---
>  drivers/media/platform/s5p-fimc/fimc-core.c        |  19 ++-
>  drivers/media/platform/s5p-fimc/fimc-core.h        |  28 ++++-
>  drivers/media/platform/s5p-fimc/fimc-reg.c         |  23 +++-
>  drivers/media/platform/s5p-fimc/fimc-reg.h         |   3 +-
>  drivers/media/platform/s5p-fimc/mipi-csis.c        |  59 +++++++++-
>  include/linux/v4l2-mediabus.h                      |   5 +
>  include/linux/videodev2.h                          |   1 +
>  15 files changed, 351 insertions(+), 33 deletions(-)

-- 
Regards,

Laurent Pinchart


      parent reply	other threads:[~2012-09-25 11:36 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-24 14:55 [PATCH RFC v2 0/5] s5p-fimc: Add interleaved image data capture support Sylwester Nawrocki
2012-09-24 14:55 ` [PATCH RFC 1/5] V4L: Add V4L2_MBUS_FMT_S5C_UYVY_JPEG_1X8 media bus format Sylwester Nawrocki
2012-09-25 11:42   ` Laurent Pinchart
2012-09-25 14:39     ` Sylwester Nawrocki
2012-10-09 13:36       ` Vincent ABRIOU
2012-10-09 17:09         ` Sylwester Nawrocki
2012-10-15 18:35           ` Sakari Ailus
2012-11-06 10:02             ` Vincent ABRIOU
2012-09-24 14:55 ` [PATCH RFC 2/5] V4L: Add V4L2_PIX_FMT_S5C_UYVY_JPG fourcc definition Sylwester Nawrocki
2012-09-25 11:44   ` Laurent Pinchart
2012-09-25 14:47     ` Sylwester Nawrocki
2012-09-24 14:55 ` [PATCH RFC 3/5] s5p-csis: Add support for non-image data packets capture Sylwester Nawrocki
2012-09-24 14:55 ` [PATCH RFC 4/5] s5p-fimc: Add support for V4L2_PIX_FMT_S5C_UYVY_JPG fourcc Sylwester Nawrocki
2012-09-24 14:55 ` [PATCH RFC 5/5] m5mols: Implement .get_frame_desc subdev callback Sylwester Nawrocki
2012-09-24 15:10 ` [PATCH RFC v2 0/5] s5p-fimc: Add interleaved image data capture support Sylwester Nawrocki
2012-09-25 11:37 ` Laurent Pinchart [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2532715.t0qPncDtcZ@avalon \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=a.hajda@samsung.com \
    --cc=hverkuil@xs4all.nl \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-media@vger.kernel.org \
    --cc=s.nawrocki@samsung.com \
    --cc=sakari.ailus@iki.fi \
    --cc=sw0312.kim@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.