From: Hans-Peter Jansen <hpj@urpla.net>
To: Stone <stone@heisl.org>
Cc: Phil Turmel <philip@turmel.org>, linux-raid <linux-raid@vger.kernel.org>
Subject: Re: Brocken Raid & LUKS
Date: Wed, 27 Feb 2013 20:33:42 +0100 [thread overview]
Message-ID: <2545996.qZhdRSH3AH@xrated> (raw)
In-Reply-To: <512E58C9.8080701@heisl.org>
Am Mittwoch, 27. Februar 2013, 20:04:41 schrieb Stone:
>
> sorry :-)
> the last night was very short...
>
> know i have tested case #2
> for x in /dev/sd[efh] ; do parted $x unit s print ; done
> Model: ATA WDC WD20EARS-00M (scsi)
> Disk /dev/sde: 3907029168s
> Sector size (logical/physical): 512B/512B
> Partition Table: gpt
>
> Number Start End Size File system Name Flags
> 1 34s 3907029118s 3907029085s raid
>
> Model: ATA WDC WD20EARS-00M (scsi)
> Disk /dev/sdf: 3907029168s
> Sector size (logical/physical): 512B/512B
> Partition Table: gpt
>
> Number Start End Size File system Name Flags
> 1 2048s 3907029118s 3907027071s prmiary
>
> Model: ATA WDC WD20EARS-00M (scsi)
> Disk /dev/sdh: 3907029168s
> Sector size (logical/physical): 512B/512B
> Partition Table: gpt
>
> Number Start End Size File system Name Flags
> 1 34s 3907029118s 3907029085s raid
Your whole partitioning looks garbled. /dev/sdf1 starts at 2048, while the
others start at 34 (even 34 is a strange value), but all end on the same
sector, sdf carries no raid flag, but primary (with a funny letter swap - my
parted gets this word right, at least).
I would compare the first sectors of these devices (especially around sector
34). Probably you managed to destroy your former partition table on sdf, e.g.
try to adjust this one similar to the others.
Cheers,
Pete
next prev parent reply other threads:[~2013-02-27 19:33 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-19 16:01 Brocken Raid & LUKS stone
2013-02-19 17:57 ` Phil Turmel
[not found] ` <5123E4E9.3020609@heisl.org>
2013-02-19 21:16 ` Phil Turmel
[not found] ` <5123EF45.6080405@heisl.org>
[not found] ` <5123F7C7.7000406@turmel.org>
[not found] ` <5123FB71.3060509@heisl.org>
2013-02-20 0:31 ` Phil Turmel
2013-02-20 18:32 ` Stone
2013-02-20 18:39 ` Phil Turmel
2013-02-21 7:04 ` Stone
2013-02-21 9:42 ` stone
2013-02-21 13:29 ` Phil Turmel
2013-02-21 14:19 ` stone
2013-02-21 15:04 ` Phil Turmel
2013-02-21 15:30 ` stone
2013-02-21 15:38 ` Phil Turmel
2013-02-21 15:49 ` Phil Turmel
2013-02-21 16:32 ` Stone
2013-02-21 16:41 ` Phil Turmel
2013-02-21 16:43 ` Stone
2013-02-21 16:46 ` Phil Turmel
2013-02-21 16:51 ` Stone
2013-02-21 16:54 ` Phil Turmel
2013-02-21 17:17 ` Stone
2013-02-21 17:23 ` Stone
2013-02-21 17:36 ` Phil Turmel
2013-02-21 17:47 ` Stone
2013-02-21 18:00 ` Phil Turmel
2013-02-21 18:08 ` Stone
2013-02-21 18:11 ` Phil Turmel
2013-02-21 18:29 ` Stone
2013-02-21 18:54 ` Phil Turmel
2013-02-21 19:12 ` Stone
2013-02-21 19:17 ` Stone
2013-02-21 19:24 ` Phil Turmel
2013-02-21 19:29 ` Stone
2013-02-21 19:45 ` Phil Turmel
2013-02-21 19:46 ` Stone
[not found] ` <51269DE0.5070905@heisl.org>
2013-02-22 10:31 ` stone
2013-02-22 13:53 ` Phil Turmel
2013-02-22 14:58 ` Stone
2013-02-22 15:37 ` Phil Turmel
2013-02-22 18:17 ` Stone
2013-02-22 18:23 ` Phil Turmel
2013-02-22 20:43 ` Stone
2013-02-22 22:35 ` Phil Turmel
2013-02-22 22:42 ` Stone
2013-02-23 2:22 ` Phil Turmel
2013-02-23 3:11 ` Stone
2013-02-23 4:36 ` Phil Turmel
2013-02-23 10:19 ` Stone
2013-02-23 16:10 ` Phil Turmel
2013-02-23 22:26 ` Stone
2013-02-23 23:49 ` Phil Turmel
2013-02-24 0:13 ` Stone
2013-02-24 4:04 ` Phil Turmel
2013-02-24 7:10 ` Stone
2013-02-24 14:15 ` Phil Turmel
2013-02-24 18:22 ` Stone
2013-02-24 18:33 ` Phil Turmel
2013-02-24 19:23 ` Stone
2013-02-24 19:51 ` Phil Turmel
2013-02-24 20:15 ` Stone
2013-02-24 20:25 ` Phil Turmel
2013-02-24 20:38 ` Stone
2013-02-24 20:44 ` Phil Turmel
2013-02-24 20:47 ` Stone
2013-02-25 9:06 ` stone
2013-02-25 18:31 ` Stone
2013-02-25 20:11 ` Stone
2013-02-26 0:19 ` Phil Turmel
2013-02-27 7:26 ` Stone
2013-02-27 19:04 ` Stone
2013-02-27 19:33 ` Hans-Peter Jansen [this message]
2013-02-27 19:51 ` Stone
2013-03-02 17:13 ` Phil Turmel
[not found] ` <5127B0AB.5040108@heisl.org>
2013-02-22 18:30 ` Phil Turmel
2013-02-21 22:29 ` Chris Murphy
2013-02-21 22:34 ` Phil Turmel
2013-02-21 22:20 ` Chris Murphy
2013-02-21 22:26 ` Phil Turmel
2013-02-21 13:15 ` Phil Turmel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2545996.qZhdRSH3AH@xrated \
--to=hpj@urpla.net \
--cc=linux-raid@vger.kernel.org \
--cc=philip@turmel.org \
--cc=stone@heisl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.