Re: [PATCH 2/2] misc: ti-fpc202: use new GPIO line value setter callbacks

[Romain Gantois <romain.gantois@bootlin.com>]

[-- Attachment #1: Type: text/plain, Size: 2192 bytes --]

On Thursday, 17 July 2025 15:03:56 CEST Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> struct gpio_chip now has callbacks for setting line values that return
> an integer, allowing to indicate failures. Convert the driver to using
> them.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> ---
>  drivers/misc/ti_fpc202.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/misc/ti_fpc202.c b/drivers/misc/ti_fpc202.c
> index ca415ef45cbe..f84cae50e2c9 100644
> --- a/drivers/misc/ti_fpc202.c
> +++ b/drivers/misc/ti_fpc202.c
> @@ -118,8 +118,8 @@ static void fpc202_set_enable(struct fpc202_priv *priv,
> int enable) gpiod_set_value(priv->en_gpio, enable);
>  }
> 
> -static void fpc202_gpio_set(struct gpio_chip *chip, unsigned int offset,
> -			    int value)
> +static int fpc202_gpio_set(struct gpio_chip *chip, unsigned int offset,
> +			   int value)
>  {
>  	struct fpc202_priv *priv = gpiochip_get_data(chip);
>  	int ret;
> @@ -128,7 +128,7 @@ static void fpc202_gpio_set(struct gpio_chip *chip,
> unsigned int offset, ret = fpc202_read(priv, FPC202_REG_OUT_A_OUT_B_VAL);
>  	if (ret < 0) {
>  		dev_err(&priv->client->dev, "Failed to set GPIO %d value! err 
%d\n",
> offset, ret); -		return;
> +		return ret;
>  	}
> 
>  	val = (u8)ret;
> @@ -138,7 +138,7 @@ static void fpc202_gpio_set(struct gpio_chip *chip,
> unsigned int offset, else
>  		val &= ~BIT(offset - FPC202_GPIO_P0_S0_OUT_A);
> 
> -	fpc202_write(priv, FPC202_REG_OUT_A_OUT_B_VAL, val);
> +	return fpc202_write(priv, FPC202_REG_OUT_A_OUT_B_VAL, val);
>  }
> 
>  static int fpc202_gpio_get(struct gpio_chip *chip, unsigned int offset)
> @@ -333,7 +333,7 @@ static int fpc202_probe(struct i2c_client *client)
>  	priv->gpio.base = -1;
>  	priv->gpio.direction_input = fpc202_gpio_direction_input;
>  	priv->gpio.direction_output = fpc202_gpio_direction_output;
> -	priv->gpio.set = fpc202_gpio_set;
> +	priv->gpio.set_rv = fpc202_gpio_set;
>  	priv->gpio.get = fpc202_gpio_get;
>  	priv->gpio.ngpio = FPC202_GPIO_COUNT;
>  	priv->gpio.parent = dev;

Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>


[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]