From: "fpml@adinet.com.uy" <fpml@adinet.com.uy>
To: bluez-devel@lists.sourceforge.net
Subject: [Bluez-devel] inconsistent lock state -> oops
Date: Fri, 18 Apr 2008 02:34:54 -0300 (UYT) [thread overview]
Message-ID: <25996983.1208496894429.JavaMail.tomcat@fe-ps03> (raw)
I run "speaker-test -D headset -b 100000 -t wav -w Side_Right.wav" twice.
The first run results in "inconsistent lock state", the second time it oopses:
[ 149.846539] =================================
[ 149.846796] [ INFO: inconsistent lock state ]
[ 149.846958] 2.6.25 #1
[ 149.847084] ---------------------------------
[ 149.847231] inconsistent {in-softirq-W} -> {softirq-on-W} usage.
[ 149.847407] speaker-test/825 [HC0[0]:SC0[0]:HE1:SE1] takes:
[ 149.847555] (&conn->lock#2){-+..}, at: [<c80290d8>] sco_chan_del+0x28/0xd0
[sco]
[ 149.848066] {in-softirq-W} state was registered at:
[ 149.848217] [<c0137d42>] __lock_acquire+0x372/0x1010
[ 149.848593] [<c0138a45>] lock_acquire+0x65/0x90
[ 149.848802] [<c02cb28a>] _spin_lock+0x1a/0x30
[ 149.848802] [<c802951f>] sco_connect_cfm+0x4f/0x220 [sco]
[ 149.848802] [<c8062668>] hci_event_packet+0x368/0x1a10 [bluetooth]
[ 149.848802] [<c805f827>] hci_rx_task+0x1e7/0x260 [bluetooth]
[ 149.848802] [<c011e548>] tasklet_action+0x38/0x80
[ 149.848802] [<c011e3b7>] __do_softirq+0x57/0xb0
[ 149.848802] [<c011e456>] do_softirq+0x46/0x50
[ 149.848802] [<c011e8c5>] irq_exit+0x65/0x80
[ 149.848802] [<c01068bd>] do_IRQ+0x4d/0x90
[ 149.848802] [<c0104eae>] common_interrupt+0x2e/0x40
[ 149.848802] [<c0102998>] cpu_idle+0x38/0x80
[ 149.848802] [<c02c4423>] rest_init+0x43/0x50
[ 149.848802] [<ffffffff>] 0xffffffff
[ 149.848802] irq event stamp: 1844143
[ 149.848802] hardirqs last enabled at (1844143): [<c011e729>]
local_bh_enable+0x89/0x100
[ 149.848802] hardirqs last disabled at (1844141): [<c011e6cb>]
local_bh_enable+0x2b/0x100
[ 149.848802] softirqs last enabled at (1844142): [<c02587cc>]
lock_sock_nested+0x9c/0xb0
[ 149.848802] softirqs last disabled at (1844140): [<c02cb2ab>]
_spin_lock_bh+0xb/0x30
[ 149.848802]
[ 149.848802] other info that might help us debug this:
[ 149.848802] 1 lock held by speaker-test/825:
[ 149.848802] #0: (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){--..}, at:
[<c8029795>] sco_sock_close+0x15/0xa0 [sco]
[ 149.848802]
[ 149.848802] stack backtrace:
[ 149.848802] Pid: 825, comm: speaker-test Not tainted 2.6.25 #1
[ 149.848802] [<c013666a>] print_usage_bug+0x11a/0x130
[ 149.848802] [<c013723d>] mark_lock+0x3cd/0x530
[ 149.848802] [<c0137d88>] __lock_acquire+0x3b8/0x1010
[ 149.848802] [<c01373e0>] ? mark_held_locks+0x40/0x80
[ 149.848802] [<c0138a45>] lock_acquire+0x65/0x90
[ 149.848802] [<c80290d8>] ? sco_chan_del+0x28/0xd0 [sco]
[ 149.848802] [<c02cb28a>] _spin_lock+0x1a/0x30
[ 149.848802] [<c80290d8>] ? sco_chan_del+0x28/0xd0 [sco]
[ 149.848802] [<c80290d8>] sco_chan_del+0x28/0xd0 [sco]
[ 149.848802] [<c80297d2>] sco_sock_close+0x52/0xa0 [sco]
[ 149.848802] [<c8029841>] sco_sock_release+0x21/0xb0 [sco]
[ 149.848802] [<c0257044>] sock_release+0x14/0x60
[ 149.848802] [<c025744c>] sock_close+0x1c/0x40
[ 149.848802] [<c015ccd1>] __fput+0x91/0x160
[ 149.848802] [<c015cf58>] fput+0x18/0x20
[ 149.848802] [<c015a3fe>] filp_close+0x3e/0x70
[ 149.848802] [<c011b7b6>] put_files_struct+0xa6/0xb0
[ 149.848802] [<c011b7f7>] __exit_files+0x37/0x40
[ 149.848802] [<c011c937>] do_exit+0x147/0x680
[ 149.848802] [<c02cb502>] ? _spin_unlock_irq+0x22/0x30
[ 149.848802] [<c011ce98>] do_group_exit+0x28/0x80
[ 149.848802] [<c01249d7>] get_signal_to_deliver+0x217/0x310
[ 149.848802] [<c0103403>] do_notify_resume+0xa3/0x810
[ 149.848802] [<c02cb638>] ? _spin_unlock_irqrestore+0x38/0x40
[ 149.848802] [<c0137569>] ? trace_hardirqs_on+0xb9/0x140
[ 149.848802] [<c01167b7>] ? hrtick_set+0x87/0xc0
[ 149.848802] [<c02c9582>] ? schedule+0x182/0x2e0
[ 149.848802] [<c0103fb8>] work_notifysig+0x13/0x1b
[ 149.848802] =======================
[ 150.863625] hci_scodata_packet: hci0 SCO packet for unknown connection
handle 43
[ 150.863933] hci_scodata_packet: hci0 SCO packet for unknown connection
handle 43
[ 150.864473] hci_scodata_packet: hci0 SCO packet for unknown connection
handle 43
[ 150.866830] PM: Removing info for bluetooth:sco00025B109DE4
[ 150.866830] bus: 'bluetooth': remove device sco00025B109DE4
[ 150.866830] kobject: 'sco00025B109DE4' (c722b9a4): kobject_uevent_env
[ 150.867034] kobject: 'sco00025B109DE4' (c722b9a4): fill_kobj_path: path =
'/devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/hci0/sco00025B109DE4'
[ 150.867642] kobject: 'sco00025B109DE4' (c722b9a4): kobject_cleanup
[ 150.867844] kobject: 'sco00025B109DE4' (c722b9a4): calling ktype release
[ 150.868300] kobject: 'sco00025B109DE4': free name
[ 157.561734] PM: Removing info for bluetooth:acl00025B109DE4
[ 157.562524] bus: 'bluetooth': remove device acl00025B109DE4
[ 157.562524] kobject: 'acl00025B109DE4' (c72ac9a4): kobject_uevent_env
[ 157.562524] kobject: 'acl00025B109DE4' (c72ac9a4): fill_kobj_path: path =
'/devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/hci0/acl00025B109DE4'
[ 157.562524] kobject: 'acl00025B109DE4' (c72ac9a4): kobject_cleanup
[ 157.562524] kobject: 'acl00025B109DE4' (c72ac9a4): calling ktype release
[ 157.562524] kobject: 'acl00025B109DE4': free name
[ 172.342080] device: 'acl00025B109DE4': device_add
[ 172.342561] kobject: 'acl00025B109DE4' (c72feda4): kobject_add_internal:
parent: 'hci0', set: 'devices'
[ 172.343068] PM: Adding info for bluetooth:acl00025B109DE4
[ 172.343316] bus: 'bluetooth': add device acl00025B109DE4
[ 172.343687] kobject: 'acl00025B109DE4' (c72feda4): kobject_uevent_env
[ 172.344004] kobject: 'acl00025B109DE4' (c72feda4): fill_kobj_path: path =
'/devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/hci0/acl00025B109DE4'
[ 173.511422] device: 'sco00025B109DE4': device_add
[ 173.512391] kobject: 'sco00025B109DE4' (c722b9a4): kobject_add_internal:
parent: 'hci0', set: 'devices'
[ 173.513139] PM: Adding info for bluetooth:sco00025B109DE4
[ 173.513361] bus: 'bluetooth': add device sco00025B109DE4
[ 173.513704] kobject: 'sco00025B109DE4' (c722b9a4): kobject_uevent_env
[ 173.514023] kobject: 'sco00025B109DE4' (c722b9a4): fill_kobj_path: path =
'/devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/hci0/sco00025B109DE4'
[ 180.376946] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0004
[ 180.377258] ohci_hcd 0000:00:01.2: urb c7249494 path 2 ep2in 5e160000 cc 5
--> status -62
[ 180.377592] ohci_hcd 0000:00:01.2: GetStatus roothub.portstatus [1] =
0x00030100 PESC CSC PPS
[ 180.377930] hub 1-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
[ 180.378100] usb 1-2: USB disconnect, address 2
[ 180.378273] ohci_hcd 0000:00:01.2: urb c7249494 path 2 ep2in 5e160000 cc 5
--> status -62
[ 180.378713] usb 1-2: unregistering device
[ 180.378855] usb 1-2: usb_disable_device nuking all URBs
[ 180.379050] ohci_hcd 0000:00:01.2: shutdown urb c7249414 ep1in-intr
[ 180.379250] ohci_hcd 0000:00:01.2: urb c7249414 path 2 ep1in 5e160000 cc 5
--> status -62
[ 180.379533] __tx_submit: hci0 tx submit failed urb c7303614 type 3 err -19
[ 180.379817] ohci_hcd 0000:00:01.2: shutdown urb c7313a14 ep3out-iso
[ 180.386511] __tx_submit: hci0 tx submit failed urb c7303614 type 3 err -19
[ 180.386942] ohci_hcd 0000:00:01.2: shutdown urb c71f1214 ep3in-iso
[ 180.393634] usb 1-2: unregistering interface 1-2:1.0
[ 180.394697] device: 'usbdev1.2_ep81': device_unregister
[ 180.394869] PM: Removing info for No Bus:usbdev1.2_ep81
[ 180.395711] kobject: 'usbdev1.2_ep81' (c720f4e0): kobject_uevent_env
[ 180.395968] kobject: 'usbdev1.2_ep81' (c720f4e0): fill_kobj_path: path =
'/class/usb_endpoint/usbdev1.2_ep81'
[ 180.396205] kobject: '1-2:1.0' (c71a8cf4): fill_kobj_path: path =
'/devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0'
[ 180.396768] kobject: 'usbdev1.2_ep81' (c720f4e0): kobject_cleanup
[ 180.397151] kobject: 'usbdev1.2_ep81' (c720f4e0): calling ktype release
[ 180.397341] kobject: 'usbdev1.2_ep81': free name
[ 180.398324] device: 'usbdev1.2_ep02': device_unregister
[ 180.398483] PM: Removing info for No Bus:usbdev1.2_ep02
[ 180.399427] kobject: 'usbdev1.2_ep02' (c720f8e0): kobject_uevent_env
[ 180.399690] kobject: 'usbdev1.2_ep02' (c720f8e0): fill_kobj_path: path =
'/class/usb_endpoint/usbdev1.2_ep02'
[ 180.399929] kobject: '1-2:1.0' (c71a8cf4): fill_kobj_path: path =
'/devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0'
[ 180.400674] kobject: 'usbdev1.2_ep02' (c720f8e0): kobject_cleanup
[ 180.400847] kobject: 'usbdev1.2_ep02' (c720f8e0): calling ktype release
[ 180.401006] kobject: 'usbdev1.2_ep02': free name
[ 180.402016] device: 'usbdev1.2_ep82': device_unregister
[ 180.402177] PM: Removing info for No Bus:usbdev1.2_ep82
[ 180.403146] kobject: 'usbdev1.2_ep82' (c720fce0): kobject_uevent_env
[ 180.403411] kobject: 'usbdev1.2_ep82' (c720fce0): fill_kobj_path: path =
'/class/usb_endpoint/usbdev1.2_ep82'
[ 180.403648] kobject: '1-2:1.0' (c71a8cf4): fill_kobj_path: path =
'/devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0'
[ 180.404130] kobject: 'usbdev1.2_ep82' (c720fce0): kobject_cleanup
[ 180.404306] kobject: 'usbdev1.2_ep82' (c720fce0): calling ktype release
[ 180.404464] kobject: 'usbdev1.2_ep82': free name
[ 180.405393] PM: Removing info for usb:1-2:1.0
[ 180.406237] bus: 'usb': remove device 1-2:1.0
[ 180.515450] PM: Removing info for bluetooth:sco00025B109DE4
[ 180.515888] bus: 'bluetooth': remove device sco00025B109DE4
[ 180.516068] kobject: 'sco00025B109DE4' (c722b9a4): kobject_uevent_env
[ 180.516327] kobject: 'sco00025B109DE4' (c722b9a4): fill_kobj_path: path =
'/devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/hci0/sco00025B109DE4'
[ 180.516783] kobject: 'sco00025B109DE4' (c722b9a4): kobject_cleanup
[ 180.516947] kobject: 'sco00025B109DE4' (c722b9a4): calling ktype release
[ 180.517126] kobject: 'sco00025B109DE4': free name
[ 180.517306] PM: Removing info for bluetooth:acl00025B109DE4
[ 180.517712] bus: 'bluetooth': remove device acl00025B109DE4
[ 180.517890] kobject: 'acl00025B109DE4' (c72feda4): kobject_uevent_env
[ 180.518141] kobject: 'acl00025B109DE4' (c72feda4): fill_kobj_path: path =
'/devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/hci0/acl00025B109DE4'
[ 180.518598] kobject: 'acl00025B109DE4' (c72feda4): kobject_cleanup
[ 180.518765] kobject: 'acl00025B109DE4' (c72feda4): calling ktype release
[ 180.518914] kobject: 'acl00025B109DE4': free name
[ 180.763913] BUG: unable to handle kernel paging request at c6781284
[ 180.764172] IP: [<c025c554>] skb_release_data+0x34/0x90
[ 180.764413] *pde = 01005067 *pte = 06781160
[ 180.764628] Oops: 0000 [#1] DEBUG_PAGEALLOC
[ 180.764810] Modules linked in: sco rfcomm l2cap hci_usb bluetooth ohci_hcd
usbcore atkbd
[ 180.765326]
[ 180.765438] Pid: 460, comm: khubd Not tainted (2.6.25 #1)
[ 180.765565] EIP: 0060:[<c025c554>] EFLAGS: 00010246 CPU: 0
[ 180.765731] EIP is at skb_release_data+0x34/0x90
[ 180.765877] EAX: c68aee40 EBX: 00000000 ECX: 00000000 EDX: c6781280
[ 180.766017] ESI: c68aee40 EDI: c801be60 EBP: c720be10 ESP: c720be08
[ 180.766157] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[ 180.766299] Process khubd (pid: 460, ti=c720a000 task=c725e000 task.
ti=c720a000)
[ 180.766442] Stack: 00000000 c68aee40 c720be20 c025cd2b c68aee40 00000002
c720be2c c025c40b
[ 180.767001] c705b000 c720be34 c025c499 c720be44 c805efa8 c7248400
c705b000 c720be60
[ 180.767024] c8019ec6 c8043a66 c7248000 c71a8c00 c71a8c00 c71a8c1c
c720be74 c804666b
[ 180.767024] Call Trace:
[ 180.767024] [<c025cd2b>] ? skb_release_all+0x8b/0xf0
[ 180.767024] [<c025c40b>] ? __kfree_skb+0xb/0x80
[ 180.767024] [<c025c499>] ? kfree_skb+0x19/0x30
[ 180.767024] [<c805efa8>] ? hci_unregister_dev+0x48/0x80 [bluetooth]
[ 180.767024] [<c8019ec6>] ? hci_usb_disconnect+0x46/0x80 [hci_usb]
[ 180.767024] [<c8043a66>] ? usb_disable_interface+0x36/0x50 [usbcore]
[ 180.767024] [<c804666b>] ? usb_unbind_interface+0x3b/0x90 [usbcore]
[ 180.767024] [<c021fb49>] ? __device_release_driver+0x59/0x80
[ 180.767024] [<c021ffd0>] ? device_release_driver+0x20/0x40
[ 180.767024] [<c021efec>] ? bus_remove_device+0x7c/0xb0
[ 180.767024] [<c021d9d8>] ? device_del+0xe8/0x160
[ 180.767024] [<c8043973>] ? usb_disable_device+0xf3/0x1b0 [usbcore]
[ 180.767024] [<c803ea47>] ? usb_disconnect+0xb7/0x120 [usbcore]
[ 180.767024] [<c803ff93>] ? hub_thread+0x443/0xf00 [usbcore]
[ 180.767024] [<c02c0012>] ? unix_bind+0xd2/0x2b0
[ 180.767024] [<c0137569>] ? trace_hardirqs_on+0xb9/0x140
[ 180.767024] [<c012b6d0>] ? autoremove_wake_function+0x0/0x40
[ 180.767024] [<c803fb50>] ? hub_thread+0x0/0xf00 [usbcore]
[ 180.767024] [<c012b406>] ? kthread+0x36/0x60
[ 180.767024] [<c012b3d0>] ? kthread+0x0/0x60
[ 180.767024] [<c0105097>] ? kernel_thread_helper+0x7/0x10
[ 180.767024] =======================
[ 180.767024] Code: 64 f6 c2 02 74 1f 83 e2 10 8b 80 94 00 00 00 80 fa 01 19
d2 81 ca ff ff fe ff 89 d1 0f c1 08 01 ca 85 d2 75 27 8b 96 94 00 00 00 <66> 83
7a 04 00 75 1e 8b 42 10 85 c0 74 08 8d 42 10 e8 86 ff ff
[ 180.767024] EIP: [<c025c554>] skb_release_data+0x34/0x90 SS:ESP 0068:
c720be08
[ 180.767024] ---[ end trace 6c19ed0d6c5f8f25 ]---
-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
reply other threads:[~2008-04-18 5:34 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=25996983.1208496894429.JavaMail.tomcat@fe-ps03 \
--to=fpml@adinet.com.uy \
--cc=bluez-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.