From: "Jernej Škrabec" <jernej.skrabec@gmail.com>
To: linux-media@vger.kernel.org, Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Linus Walleij <linus.walleij@linaro.org>,
linux-gpio@vger.kernel.org, Maxime Ripard <maxime@cerno.tech>,
Florian Fainelli <f.fainelli@gmail.com>, 5kft <5kft@5kft.org>,
Corentin Labbe <clabbe.montjoie@gmail.com>
Subject: Re: [PATCH for 5.17] pinctrl-sunxi: sunxi_pinctrl_gpio_direction_in/output: use correct offset
Date: Wed, 26 Jan 2022 17:38:20 +0100 [thread overview]
Message-ID: <2613560.mvXUDI8C0e@kista> (raw)
In-Reply-To: <0f536cd8-01db-5d16-2cec-ec6d19409a49@xs4all.nl>
Hi Hans!
Dne sreda, 26. januar 2022 ob 12:02:04 CET je Hans Verkuil napisal(a):
> The commit that sets the direction directly without calling
> pinctrl_gpio_direction(), forgot to add chip->base to the offset when
> calling sunxi_pmx_gpio_set_direction().
>
> This caused failures for various Allwinner boards which have two
> GPIO blocks.
>
> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
> Reported-by: 5kft <5kft@5kft.org>
> Suggested-by: 5kft <5kft@5kft.org>
> Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
> Fixes: 8df89a7cbc63 (pinctrl-sunxi: don't call pinctrl_gpio_direction())
> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Next time please send to all sunxi maintainers/reviewers and mailing list.
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Best regards,
Jernej
> ---
> Corentin, can you please test this patch to verify that this fixes your
> issue on the orangepiPC?
> ---
>
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/
pinctrl-sunxi.c
> index 80d6750c74a6..061323eab8b1 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
> @@ -837,7 +837,8 @@ static int sunxi_pinctrl_gpio_direction_input(struct
gpio_chip *chip,
> {
> struct sunxi_pinctrl *pctl = gpiochip_get_data(chip);
>
> - return sunxi_pmx_gpio_set_direction(pctl->pctl_dev, NULL, offset,
true);
> + return sunxi_pmx_gpio_set_direction(pctl->pctl_dev, NULL,
> + chip->base + offset,
true);
> }
>
> static int sunxi_pinctrl_gpio_get(struct gpio_chip *chip, unsigned offset)
> @@ -890,7 +891,8 @@ static int sunxi_pinctrl_gpio_direction_output(struct
gpio_chip *chip,
> struct sunxi_pinctrl *pctl = gpiochip_get_data(chip);
>
> sunxi_pinctrl_gpio_set(chip, offset, value);
> - return sunxi_pmx_gpio_set_direction(pctl->pctl_dev, NULL, offset,
false);
> + return sunxi_pmx_gpio_set_direction(pctl->pctl_dev, NULL,
> + chip->base + offset,
false);
> }
>
> static int sunxi_pinctrl_gpio_of_xlate(struct gpio_chip *gc,
>
next prev parent reply other threads:[~2022-01-26 16:38 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-06 13:16 [RFC PATCH 0/3] pinctrl: can_sleep and pinctrl_gpio_direction Hans Verkuil
2021-12-06 13:16 ` [RFC PATCH 1/3] pinctrl/core: check that can_sleep is true in pinctrl_gpio_direction() Hans Verkuil
2021-12-06 13:16 ` [RFC PATCH 2/3] pinctrl-bcm2835: don't call pinctrl_gpio_direction() Hans Verkuil
2021-12-06 17:29 ` Florian Fainelli
2021-12-16 2:43 ` Linus Walleij
2021-12-06 13:16 ` [RFC PATCH 3/3] pinctrl-sunxi: " Hans Verkuil
2021-12-16 2:44 ` Linus Walleij
[not found] ` <CAHp75VcPhSvQvjA5WBO72Lb5idc6vkkodai_V=YmLWtsz-qg1A@mail.gmail.com>
2021-12-08 0:30 ` [RFC PATCH 0/3] pinctrl: can_sleep and pinctrl_gpio_direction Linus Walleij
2021-12-08 9:26 ` Hans Verkuil
2021-12-08 14:24 ` Andy Shevchenko
2022-01-26 11:02 ` [PATCH for 5.17] pinctrl-sunxi: sunxi_pinctrl_gpio_direction_in/output: use correct offset Hans Verkuil
2022-01-26 15:22 ` Corentin Labbe
2022-01-26 16:38 ` Jernej Škrabec [this message]
2022-01-28 20:40 ` Guenter Roeck
2022-02-13 20:42 ` Guenter Roeck
2022-02-14 8:44 ` Hans Verkuil
2022-02-14 21:28 ` Guenter Roeck
2022-02-15 0:19 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2613560.mvXUDI8C0e@kista \
--to=jernej.skrabec@gmail.com \
--cc=5kft@5kft.org \
--cc=clabbe.montjoie@gmail.com \
--cc=f.fainelli@gmail.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=maxime@cerno.tech \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.