From: "Jernej Škrabec" <jernej.skrabec@gmail.com>
To: maxime@cerno.tech, linux-arm-kernel@lists.infradead.org,
linux-sunxi@googlegroups.com, wens@csie.org,
Philip Rinn <rinni@inventati.org>
Subject: Re: Re: [linux-sunxi] Re: [PATCH RESEND v3] arm64: dts: allwinner: a64: olinuxino: Enable audio
Date: Sat, 26 Mar 2022 07:45:35 +0100 [thread overview]
Message-ID: <2621573.mvXUDI8C0e@kista> (raw)
In-Reply-To: <YjyVXUUNaZageNwC@inventati.org>
Hi,
Dne četrtek, 24. marec 2022 ob 17:28:50 CET je Philip Rinn napisal(a):
> Hi,
>
> any chance this patch get applied? It seems it will not make it into
> 5.18 ... what did I miss?
Not much, sometimes patches are overlooked. I'll review it again, and if
everthing is fine, it will be applied for 5.19 once 5.18-rc1 is out.
Sorry for taking it so long.
Best regards,
Jernej
>
> Best regards
> Philip
>
> On 12.01.2022 at 16:49:27, Philip Rinn wrote:
> > Enable the audio hardware on the Olimex A64-OLinuXino board family.
> > Tested on the A64-OLinuXino-2Ge8G-IND variant.
> >
> > Signed-off-by: Philip Rinn <rinni@inventati.org>
> > ---
> >
> > Changes in v2: added missing &sound {...} part
> > Changes in v3: removed HDMI audio part as requested by Jernej Škrabec
> >
> > arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts | 30
> > +++++++++++++++++++
> > 1 file changed, 30 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
> > b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
> > index ec7e2c0e82c1..6f2674bb1b7f 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
> > @@ -58,6 +58,15 @@ wifi_pwrseq: wifi_pwrseq {
> > };
> > };
> >
> > +&codec {
> > + status = "okay";
> > +};
> > +
> > +&codec_analog {
> > + cpvdd-supply = <®_eldo1>;
> > + status = "okay";
> > +};
> > +
> > &cpu0 {
> > cpu-supply = <®_dcdc2>;
> > };
> > @@ -74,6 +83,10 @@ &cpu3 {
> > cpu-supply = <®_dcdc2>;
> > };
> >
> > +&dai {
> > + status = "okay";
> > +};
> > +
> > &de {
> > status = "okay";
> > };
> > @@ -328,6 +341,23 @@ &simplefb_hdmi {
> > vcc-hdmi-supply = <®_dldo1>;
> > };
> >
> > +&sound {
> > + simple-audio-card,aux-devs = <&codec_analog>;
> > + simple-audio-card,widgets = "Microphone", "Microphone Jack Left",
> > + "Microphone", "Microphone Jack Right",
> > + "Headphone", "Headphone Jack";
> > + simple-audio-card,routing = "Left DAC", "DACL",
> > + "Right DAC", "DACR",
> > + "Headphone Jack", "HP",
> > + "ADCL", "Left ADC",
> > + "ADCR", "Right ADC",
> > + "Microphone Jack Left", "MBIAS",
> > + "MIC1", "Microphone Jack Left",
> > + "Microphone Jack Left", "HBIAS",
> > + "MIC2", "Microphone Jack Right";
> > + status = "okay";
> > +};
> > +
> > &uart0 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&uart0_pb_pins>;
> > --
> > 2.34.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-03-26 6:47 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-28 16:28 [PATCH v3] arm64: dts: allwinner: a64: olinuxino: Enable audio Philip Rinn
2021-12-28 20:28 ` Philip Rinn
2022-01-11 20:08 ` [PATCH RESEND " Philip Rinn
2022-01-12 8:48 ` Maxime Ripard
2022-01-12 15:49 ` Philip Rinn
2022-03-24 16:28 ` [linux-sunxi] " Philip Rinn
2022-03-26 6:45 ` Jernej Škrabec [this message]
2022-04-07 2:49 ` Samuel Holland
2022-04-07 5:02 ` Jernej Škrabec
2022-04-07 15:51 ` [PATCH v4] " Philip Rinn
2022-04-07 15:51 ` Philip Rinn
2022-04-07 22:06 ` Samuel Holland
2022-04-07 22:06 ` Samuel Holland
2022-04-10 18:23 ` Jernej Škrabec
2022-04-10 18:23 ` Jernej Škrabec
2022-05-08 17:38 ` Milan P. Stanić
2022-05-08 17:38 ` Milan P. Stanić
2022-01-12 9:09 ` [linux-sunxi] [PATCH RESEND v3] " Priit Laes
2022-01-12 15:29 ` Philip Rinn
2022-01-13 6:59 ` Jernej Škrabec
2022-01-13 16:37 ` Philip Rinn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2621573.mvXUDI8C0e@kista \
--to=jernej.skrabec@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-sunxi@googlegroups.com \
--cc=maxime@cerno.tech \
--cc=rinni@inventati.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.