From: Carsten Schiers <carsten@schiers.de>
To: xen-devel@lists.xensource.com
Subject: AMD P-States not recognized for Xen 3.3 and 3.4
Date: Wed, 7 Jan 2009 10:35:37 +0100 [thread overview]
Message-ID: <26336541.151231320937178.JavaMail.root@uhura> (raw)
[-- Attachment #1: Type: text/plain, Size: 832 bytes --]
Xen doesn't seem to fully recognize P-States in my AMD 4050e / Gigabyte M56S-S3
setting.
What works is a Xen 3.2-1 Debian with waldi 2.6.18-3.1-2 kernel in a way, that
when specifying cpufreq=dom0-kernel and using cpufreq-set, I can change CPU
frequency (minor problem here: it will report backwards running clocks as mentioned
elsewere here: Timer ISR/0: Time went backwards).
But using cpufreq=xen will not report any P-states at all. Tried with different
3.3 versions up to 3.3.1 and 3.4 unstable. With cpuidle and without, also did
an update to BIOS F4 (latest version). Used xenpm from 3.3 and 3.4 to check.
I attached two dmesg / xm dmesg outputs, V1 will show with cpuidle on F4e BIOS,
V2 will show without cpuidle on F4 BIOS. Both used latest Xen 3.4-unstable and
waldi 2.6.18-3.3-1 kernel.
Any ideas how to proceed?
[-- Attachment #2: dmesg1.txt --]
[-- Type: text/plain, Size: 17813 bytes --]
Bootdata ok (command line is single root=/dev/mapper/space-data_lv_root2 ro BOOT console=tty0 dom0_mem=256M pciback.hide=(00:02.0)(00:02.1)(00:06.0)(01:07.0)(01:08.0)(01:09.0) noirqdebug nousb xencons=off)
Linux version 2.6.18-xen-3.3-1-amd64 (Debian 2.6.18.dfsg.1-23+xen.2) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23+1)) #1 SMP Sun Nov 23 13:15:10 CET 2008
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000000f33dd000 (usable)
DMI 2.4 present.
On node 0 totalpages: 982696
DMA zone: 4040 pages, LIFO batch:0
DMA32 zone: 978656 pages, LIFO batch:31
ACPI: RSDP (v000 GBT ) @ 0x00000000000f6510
ACPI: RSDT (v001 GBT NVDAACPI 0x42302e31 NVDA 0x01010101) @ 0x00000000bfef3000
ACPI: FADT (v001 GBT NVDAACPI 0x42302e31 NVDA 0x01010101) @ 0x00000000bfef3040
ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x00000000bfef7880
ACPI: HPET (v001 GBT NVDAACPI 0x42302e31 NVDA 0x00000098) @ 0x00000000bfef7ac0
ACPI: MCFG (v001 GBT NVDAACPI 0x42302e31 NVDA 0x01010101) @ 0x00000000bfef7b00
ACPI: MADT (v001 GBT NVDAACPI 0x42302e31 NVDA 0x01010101) @ 0x00000000bfef77c0
ACPI: DSDT (v001 GBT NVDAACPI 0x00001000 MSFT 0x0100000c) @ 0x0000000000000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
Setting APIC routing to xen
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c0000000 (gap: bff00000:32100000)
Built 1 zonelists. Total pages: 982696
Kernel command line: single root=/dev/mapper/space-data_lv_root2 ro BOOT console=tty0 dom0_mem=256M pciback.hide=(00:02.0)(00:02.1)(00:06.0)(01:07.0)(01:08.0)(01:09.0) noirqdebug nousb xencons=off
IRQ lockup detection disabled
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 2109.588 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Kernel range: ffff8800061a7000 - ffff88000a1a7000
Address size: 27 bits
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Memory: 3813724k/3985268k available (2017k kernel code, 162664k reserved, 897k data, 152k init)
Calibrating delay using timer specific routine.. 4220.60 BogoMIPS (lpj=8441212)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
SMP alternatives: switching to SMP code
Brought up 2 CPUs
Initializing CPU#1
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
migration_cost=223
checking if image is initramfs... it is
Freeing initrd memory: 16002k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Cannot map mmconfig aperture for segment 0
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:06.0
PCI: Transparent bridge - 0000:00:08.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: ACPI device : hid PNP0A08
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0103
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C01
pnp: PnP ACPI: found 12 devices
xen_mem: Initialising balloon driver.
usbcore: USB support disabled
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:01' and the driver 'system'
pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
pnp: 00:01: ioport range 0x1400-0x147f has been reserved
pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
pnp: 00:01: ioport range 0x1800-0x187f has been reserved
pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
pnp: match found with the PnP device '00:02' and the driver 'system'
pnp: match found with the PnP device '00:0a' and the driver 'system'
pnp: match found with the PnP device '00:0b' and the driver 'system'
pciback 0000:00:02.0: seizing device
pciback 0000:00:02.1: seizing device
pciback 0000:00:06.0: seizing device
pciback 0000:01:07.0: seizing device
pciback 0000:01:08.0: seizing device
pciback 0000:01:09.0: seizing device
PCI: Bridge: 0000:00:08.0
IO window: 9000-9fff
MEM window: f4000000-f6ffffff
PREFETCH window: f7000000-f7ffffff
PCI: Bridge: 0000:00:0c.0
IO window: a000-afff
MEM window: f8000000-f9ffffff
PREFETCH window: c0000000-c00fffff
PCI: Bridge: 0000:00:0e.0
IO window: b000-bfff
MEM window: fa000000-fbffffff
PREFETCH window: c0100000-c01fffff
PCI: Setting latency timer of device 0000:00:08.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1231182357.964:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:0c.0 to 64
pcie_portdrv_probe->Dev[045a:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
pcie_portdrv_probe->Dev[0459:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Event-channel device installed.
netfront: Initialising virtual ethernet driver.
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
GSI 16 sharing vector 0xA8 and IRQ 16
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 16
ACPI: PCI interrupt for device 0000:01:09.0 disabled
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
GSI 17 sharing vector 0xB0 and IRQ 17
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 17
ACPI: PCI interrupt for device 0000:01:08.0 disabled
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
GSI 18 sharing vector 0xB8 and IRQ 18
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 18
ACPI: PCI interrupt for device 0000:01:07.0 disabled
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
GSI 19 sharing vector 0xC0 and IRQ 19
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 19
ACPI: PCI interrupt for device 0000:00:06.0 disabled
ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
GSI 20 sharing vector 0xC8 and IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [AUB2] -> GSI 22 (level, low) -> IRQ 20
ACPI: PCI interrupt for device 0000:00:02.1 disabled
ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 21
GSI 21 sharing vector 0xD0 and IRQ 21
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [AUBA] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI interrupt for device 0000:00:02.0 disabled
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:09' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 152k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI Exception (acpi_processor-0707): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI Exception (acpi_processor-0707): AE_NOT_FOUND, Processor Device is not present [20060707]
SCSI subsystem initialized
libata version 2.00 loaded.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-MCP65: IDE controller at PCI slot 0000:00:09.0
NFORCE-MCP65: chipset revision 161
NFORCE-MCP65: not 100% native mode: will probe irqs later
NFORCE-MCP65: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE-MCP65: 0000:00:09.0 (rev a1) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: ST3500830A, ATA DISK drive
hdb: JLMS XJ-HD165H, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ahci 0000:00:0a.0: version 2.0
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
GSI 22 sharing vector 0xD8 and IRQ 22
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:0a.0 to 64
ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:0a.0: flags: 64bit ncq pm led clo pmp pio
ata1: SATA max UDMA/133 cmd 0xFFFFC20000004100 ctl 0x0 bmdma 0x0 irq 253
ata2: SATA max UDMA/133 cmd 0xFFFFC20000004180 ctl 0x0 bmdma 0x0 irq 253
ata3: SATA max UDMA/133 cmd 0xFFFFC20000004200 ctl 0x0 bmdma 0x0 irq 253
ata4: SATA max UDMA/133 cmd 0xFFFFC20000004280 ctl 0x0 bmdma 0x0 irq 253
scsi0 : ahci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 31/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : ahci
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 31/32)
ata2.00: ata2: dev 0 multi count 16
ata2.00: configured for UDMA/133
scsi2 : ahci
ata3: SATA link down (SStatus 0 SControl 300)
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
Vendor: ATA Model: ST3500830AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: ST3500830AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
hda: max request size: 512KiB
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: Attached scsi disk sdb
hda: Host Protected Area detected.
current capacity is 976771055 sectors (500106 MB)
native capacity is 976773168 sectors (500107 MB)
hda: Host Protected Area disabled.
hda: 976773168 sectors (500107 MB) w/8192KiB Cache, CHS=60801/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1
hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Probing IDE interface ide1...
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
md: raid1 personality registered for level 1
md: md1 stopped.
md: bind<sdb2>
md: bind<sda2>
raid1: raid set md1 active with 2 out of 2 mirrors
md: md0 stopped.
md: bind<sdb1>
md: bind<sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
Attempting manual resume
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
ts: Compaq touchscreen protocol output
input: PC Speaker as /class/input/input1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:08' and the driver 'serial'
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
EXT3 FS on dm-23, internal journal
loop: loaded (max 64 devices)
kjournald starting. Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-27, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1048568k swap on /dev/mapper/space-data_lv_swap. Priority:-1 extents:1 across:1048568k
Bridge firewalling registered
device wlan entered promiscuous mode
audit(1231182375.169:2): dev=wlan prom=256 old_prom=0 auid=4294967295
device dmz entered promiscuous mode
audit(1231182375.249:3): dev=dmz prom=256 old_prom=0 auid=4294967295
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
[drm] Initialized drm 1.0.1 20051102
suspend: event channel 15
dmz: no IPv6 routers present
extern: no IPv6 routers present
wlan: no IPv6 routers present
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on dm-22, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
[-- Attachment #3: dmesg2.txt --]
[-- Type: text/plain, Size: 17673 bytes --]
Bootdata ok (command line is single root=/dev/mapper/space-data_lv_root2 ro BOOT console=tty0 dom0_mem=256M pciback.hide=(00:02.0)(00:02.1)(00:06.0)(01:07.0)(01:08.0)(01:09.0) noirqdebug nousb xencons=off)
Linux version 2.6.18-xen-3.3-1-amd64 (Debian 2.6.18.dfsg.1-23+xen.2) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23+1)) #1 SMP Sun Nov 23 13:15:10 CET 2008
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000000f33dd000 (usable)
DMI 2.4 present.
On node 0 totalpages: 982696
DMA zone: 4040 pages, LIFO batch:0
DMA32 zone: 978656 pages, LIFO batch:31
ACPI: RSDP (v000 GBT ) @ 0x00000000000f65b0
ACPI: RSDT (v001 GBT NVDAACPI 0x42302e31 NVDA 0x01010101) @ 0x00000000bfef3000
ACPI: FADT (v001 GBT NVDAACPI 0x42302e31 NVDA 0x01010101) @ 0x00000000bfef3040
ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x00000000bfef7880
ACPI: HPET (v001 GBT NVDAACPI 0x42302e31 NVDA 0x00000098) @ 0x00000000bfef7ac0
ACPI: MCFG (v001 GBT NVDAACPI 0x42302e31 NVDA 0x01010101) @ 0x00000000bfef7b00
ACPI: MADT (v001 GBT NVDAACPI 0x42302e31 NVDA 0x01010101) @ 0x00000000bfef77c0
ACPI: DSDT (v001 GBT NVDAACPI 0x00001000 MSFT 0x03000000) @ 0x0000000000000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
Setting APIC routing to xen
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c0000000 (gap: bff00000:32100000)
Built 1 zonelists. Total pages: 982696
Kernel command line: single root=/dev/mapper/space-data_lv_root2 ro BOOT console=tty0 dom0_mem=256M pciback.hide=(00:02.0)(00:02.1)(00:06.0)(01:07.0)(01:08.0)(01:09.0) noirqdebug nousb xencons=off
IRQ lockup detection disabled
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 2109.578 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Kernel range: ffff8800061a7000 - ffff88000a1a7000
Address size: 27 bits
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Memory: 3813724k/3985268k available (2017k kernel code, 162664k reserved, 897k data, 152k init)
Calibrating delay using timer specific routine.. 4220.62 BogoMIPS (lpj=8441254)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
SMP alternatives: switching to SMP code
Brought up 2 CPUs
Initializing CPU#1
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
migration_cost=221
checking if image is initramfs... it is
Freeing initrd memory: 16002k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Cannot map mmconfig aperture for segment 0
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:06.0
PCI: Transparent bridge - 0000:00:08.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: ACPI device : hid PNP0A08
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0103
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C01
pnp: PnP ACPI: found 12 devices
xen_mem: Initialising balloon driver.
usbcore: USB support disabled
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:01' and the driver 'system'
pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
pnp: 00:01: ioport range 0x1400-0x147f has been reserved
pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
pnp: 00:01: ioport range 0x1800-0x187f has been reserved
pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
pnp: match found with the PnP device '00:02' and the driver 'system'
pnp: match found with the PnP device '00:0a' and the driver 'system'
pnp: match found with the PnP device '00:0b' and the driver 'system'
pciback 0000:00:02.0: seizing device
pciback 0000:00:02.1: seizing device
pciback 0000:00:06.0: seizing device
pciback 0000:01:07.0: seizing device
pciback 0000:01:08.0: seizing device
pciback 0000:01:09.0: seizing device
PCI: Bridge: 0000:00:08.0
IO window: 9000-9fff
MEM window: f4000000-f6ffffff
PREFETCH window: f7000000-f7ffffff
PCI: Bridge: 0000:00:0c.0
IO window: a000-afff
MEM window: f8000000-f9ffffff
PREFETCH window: c0000000-c00fffff
PCI: Bridge: 0000:00:0e.0
IO window: b000-bfff
MEM window: fa000000-fbffffff
PREFETCH window: c0100000-c01fffff
PCI: Setting latency timer of device 0000:00:08.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1231185295.564:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:0c.0 to 64
pcie_portdrv_probe->Dev[045a:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
pcie_portdrv_probe->Dev[0459:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Event-channel device installed.
netfront: Initialising virtual ethernet driver.
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
GSI 16 sharing vector 0xA8 and IRQ 16
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 16
ACPI: PCI interrupt for device 0000:01:09.0 disabled
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
GSI 17 sharing vector 0xB0 and IRQ 17
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 17
ACPI: PCI interrupt for device 0000:01:08.0 disabled
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
GSI 18 sharing vector 0xB8 and IRQ 18
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 18
ACPI: PCI interrupt for device 0000:01:07.0 disabled
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
GSI 19 sharing vector 0xC0 and IRQ 19
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 19
ACPI: PCI interrupt for device 0000:00:06.0 disabled
ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
GSI 20 sharing vector 0xC8 and IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [AUB2] -> GSI 22 (level, low) -> IRQ 20
ACPI: PCI interrupt for device 0000:00:02.1 disabled
ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 21
GSI 21 sharing vector 0xD0 and IRQ 21
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [AUBA] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI interrupt for device 0000:00:02.0 disabled
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:09' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 152k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI Exception (acpi_processor-0707): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI Exception (acpi_processor-0707): AE_NOT_FOUND, Processor Device is not present [20060707]
SCSI subsystem initialized
libata version 2.00 loaded.
ahci 0000:00:0a.0: version 2.0
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
GSI 22 sharing vector 0xD8 and IRQ 22
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:0a.0 to 64
ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:0a.0: flags: 64bit ncq pm led clo pmp pio
ata1: SATA max UDMA/133 cmd 0xFFFFC20000004100 ctl 0x0 bmdma 0x0 irq 253
ata2: SATA max UDMA/133 cmd 0xFFFFC20000004180 ctl 0x0 bmdma 0x0 irq 253
ata3: SATA max UDMA/133 cmd 0xFFFFC20000004200 ctl 0x0 bmdma 0x0 irq 253
ata4: SATA max UDMA/133 cmd 0xFFFFC20000004280 ctl 0x0 bmdma 0x0 irq 253
scsi0 : ahci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 31/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : ahci
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 31/32)
ata2.00: ata2: dev 0 multi count 16
ata2.00: configured for UDMA/133
scsi2 : ahci
ata3: SATA link down (SStatus 0 SControl 300)
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
Vendor: ATA Model: ST3500830AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: ST3500830AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-MCP65: IDE controller at PCI slot 0000:00:09.0
NFORCE-MCP65: chipset revision 161
NFORCE-MCP65: not 100% native mode: will probe irqs later
NFORCE-MCP65: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE-MCP65: 0000:00:09.0 (rev a1) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: Attached scsi disk sdb
hda: ST3500830A, ATA DISK drive
hdb: JLMS XJ-HD165H, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 512KiB
hda: Host Protected Area detected.
current capacity is 976771055 sectors (500106 MB)
native capacity is 976773168 sectors (500107 MB)
hda: Host Protected Area disabled.
hda: 976773168 sectors (500107 MB) w/8192KiB Cache, CHS=60801/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1
hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Probing IDE interface ide1...
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
md: raid1 personality registered for level 1
md: md1 stopped.
md: bind<sdb2>
md: bind<sda2>
raid1: raid set md1 active with 2 out of 2 mirrors
md: md0 stopped.
md: bind<sdb1>
md: bind<sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: PC Speaker as /class/input/input1
ts: Compaq touchscreen protocol output
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:08' and the driver 'serial'
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
EXT3 FS on dm-23, internal journal
loop: loaded (max 64 devices)
kjournald starting. Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-27, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1048568k swap on /dev/mapper/space-data_lv_swap. Priority:-1 extents:1 across:1048568k
Bridge firewalling registered
device wlan entered promiscuous mode
audit(1231185310.419:2): dev=wlan prom=256 old_prom=0 auid=4294967295
device dmz entered promiscuous mode
audit(1231185310.491:3): dev=dmz prom=256 old_prom=0 auid=4294967295
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
[drm] Initialized drm 1.0.1 20051102
suspend: event channel 15
extern: no IPv6 routers present
wlan: no IPv6 routers present
dmz: no IPv6 routers present
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on dm-22, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
[-- Attachment #4: xmdemesg2.txt --]
[-- Type: text/plain, Size: 4431 bytes --]
__ __ _____ _ _ _ _ _
\ \/ /___ _ __ |___ /| || | _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ '_ \ |_ \| || |_ __| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
/ \ __/ | | | ___) |__ _|__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |____(_) |_| \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 3.4-unstable (root@space.zz) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) Sat Dec 27 20:16:15 CET 2008
(XEN) Latest ChangeSet: Mon Dec 22 13:48:40 2008 +0000 18941:e2f36d066b7b
(XEN) Command line: single vga=text-80x25 cpufreq=xen
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 3 MBR signatures
(XEN) Found 3 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009f800 (usable)
(XEN) 000000000009f800 - 00000000000a0000 (reserved)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000bfef0000 (usable)
(XEN) 00000000bfef0000 - 00000000bfef3000 (ACPI NVS)
(XEN) 00000000bfef3000 - 00000000bff00000 (ACPI data)
(XEN) 00000000f2000000 - 00000000f4000000 (reserved)
(XEN) 00000000fec00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000140000000 (usable)
(XEN) System RAM: 4094MB (4192828kB)
(XEN) ACPI: RSDP 000F65B0, 0014 (r0 GBT )
(XEN) ACPI: RSDT BFEF3000, 0038 (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
(XEN) ACPI: FACP BFEF3040, 0074 (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
(XEN) ACPI: DSDT BFEF30C0, 46DC (r1 GBT NVDAACPI 1000 MSFT 3000000)
(XEN) ACPI: FACS BFEF0000, 0040
(XEN) ACPI: SSDT BFEF7880, 0206 (r1 PTLTD POWERNOW 1 LTP 1)
(XEN) ACPI: HPET BFEF7AC0, 0038 (r1 GBT NVDAACPI 42302E31 NVDA 98)
(XEN) ACPI: MCFG BFEF7B00, 003C (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
(XEN) ACPI: APIC BFEF77C0, 008E (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
(XEN) Xen heap: 14MB (14584kB)
(XEN) Domain heap initialised
(XEN) Processor #0 15:11 APIC version 16
(XEN) Processor #1 15:11 APIC version 16
(XEN) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2109.578 MHz processor.
(XEN) AMD SVM: ASIDs enabled.
(XEN) HVM: SVM enabled
(XEN) CPU0: AMD K8 machine check reporting enabled.
(XEN) CPU0: AMD Athlon(tm) Dual Core Processor 4050e stepping 02
(XEN) Booting processor 1/1 eip 8c000
(XEN) AMD: Disabling C1 Clock Ramping Node #0
(XEN) AMD SVM: ASIDs enabled.
(XEN) CPU1: AMD K8 machine check reporting enabled.
(XEN) CPU1: AMD Athlon(tm) Dual Core Processor 4050e stepping 02
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) checking TSC synchronization across 2 CPUs:
(XEN) CPU#0 had -65 usecs TSC skew, fixed it up.
(XEN) CPU#1 had 65 usecs TSC skew, fixed it up.
(XEN) Platform timer is 25.000MHz HPET
(XEN) Brought up 2 CPUs
(XEN) I/O virtualisation disabled
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 -> 0xffffffff805af1d0
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000138000000->000000013a000000 (986077 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80200000->ffffffff805af1d0
(XEN) Init. ramdisk: ffffffff805b0000->ffffffff81550800
(XEN) Phys-Mach map: ffffffff81551000->ffffffff81ce6ee8
(XEN) Start info: ffffffff81ce7000->ffffffff81ce74a4
(XEN) Page tables: ffffffff81ce8000->ffffffff81cfb000
(XEN) Boot stack: ffffffff81cfb000->ffffffff81cfc000
(XEN) TOTAL: ffffffff80000000->ffffffff82000000
(XEN) ENTRY ADDRESS: ffffffff80200000
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 108kB init memory.
(XEN) mm.c:706:d0 Non-privileged (0) attempt to map I/O space 000fec00
[-- Attachment #5: xmdmesg1.txt --]
[-- Type: text/plain, Size: 6433 bytes --]
__ __ _____ _ _ _ _ _
\ \/ /___ _ __ |___ /| || | _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ '_ \ |_ \| || |_ __| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
/ \ __/ | | | ___) |__ _|__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |____(_) |_| \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 3.4-unstable (root@space.zz) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) Sat Dec 27 20:16:15 CET 2008
(XEN) Latest ChangeSet: Mon Dec 22 13:48:40 2008 +0000 18941:e2f36d066b7b
(XEN) Command line: single vga=text-80x25 cpufreq=xen cpuidle
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 3 MBR signatures
(XEN) Found 3 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009f800 (usable)
(XEN) 000000000009f800 - 00000000000a0000 (reserved)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000bfef0000 (usable)
(XEN) 00000000bfef0000 - 00000000bfef3000 (ACPI NVS)
(XEN) 00000000bfef3000 - 00000000bff00000 (ACPI data)
(XEN) 00000000f2000000 - 00000000f4000000 (reserved)
(XEN) 00000000fec00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000140000000 (usable)
(XEN) System RAM: 4094MB (4192828kB)
(XEN) ACPI: RSDP 000F6510, 0014 (r0 GBT )
(XEN) ACPI: RSDT BFEF3000, 0038 (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
(XEN) ACPI: FACP BFEF3040, 0074 (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
(XEN) ACPI: DSDT BFEF30C0, 46DC (r1 GBT NVDAACPI 1000 MSFT 100000C)
(XEN) ACPI: FACS BFEF0000, 0040
(XEN) ACPI: SSDT BFEF7880, 0206 (r1 PTLTD POWERNOW 1 LTP 1)
(XEN) ACPI: HPET BFEF7AC0, 0038 (r1 GBT NVDAACPI 42302E31 NVDA 98)
(XEN) ACPI: MCFG BFEF7B00, 003C (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
(XEN) ACPI: APIC BFEF77C0, 008E (r1 GBT NVDAACPI 42302E31 NVDA 1010101)
(XEN) Xen heap: 14MB (14584kB)
(XEN) Domain heap initialised
(XEN) Processor #0 15:11 APIC version 16
(XEN) Processor #1 15:11 APIC version 16
(XEN) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2109.588 MHz processor.
(XEN) AMD SVM: ASIDs enabled.
(XEN) HVM: SVM enabled
(XEN) CPU0: AMD K8 machine check reporting enabled.
(XEN) CPU0: AMD Athlon(tm) Dual Core Processor 4050e stepping 02
(XEN) Booting processor 1/1 eip 8c000
(XEN) AMD: Disabling C1 Clock Ramping Node #0
(XEN) AMD SVM: ASIDs enabled.
(XEN) CPU1: AMD K8 machine check reporting enabled.
(XEN) CPU1: AMD Athlon(tm) Dual Core Processor 4050e stepping 02
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) checking TSC synchronization across 2 CPUs:
(XEN) CPU#0 had -52 usecs TSC skew, fixed it up.
(XEN) CPU#1 had 52 usecs TSC skew, fixed it up.
(XEN) Platform timer is 25.000MHz HPET
(XEN) Brought up 2 CPUs
(XEN) I/O virtualisation disabled
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80200000 -> 0xffffffff805af1d0
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000138000000->000000013a000000 (986077 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80200000->ffffffff805af1d0
(XEN) Init. ramdisk: ffffffff805b0000->ffffffff81550800
(XEN) Phys-Mach map: ffffffff81551000->ffffffff81ce6ee8
(XEN) Start info: ffffffff81ce7000->ffffffff81ce74a4
(XEN) Page tables: ffffffff81ce8000->ffffffff81cfb000
(XEN) Boot stack: ffffffff81cfb000->ffffffff81cfc000
(XEN) TOTAL: ffffffff80000000->ffffffff82000000
(XEN) ENTRY ADDRESS: ffffffff80200000
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 108kB init memory.
(XEN) mm.c:706:d0 Non-privileged (0) attempt to map I/O space 000fec00
(XEN) cpu0 cx acpi info:
(XEN) count = 1
(XEN) flags: bm_cntl[1], bm_chk[0], has_cst[0],
(XEN) pwr_setup_done[1], bm_rld_set[0]
(XEN) states[0]:
(XEN) reg.space_id = 0x0
(XEN) reg.bit_width = 0x0
(XEN) reg.bit_offset = 0x0
(XEN) reg.access_size = 0x0
(XEN) reg.address = 0x0
(XEN) type = 1
(XEN) latency = 0
(XEN) power = 0
(XEN) dp(@0x0000000000000000)
(XEN) ==cpu0==
(XEN) active state: C-1
(XEN) max_cstate: C7
(XEN) states:
(XEN) C1: type[C1] latency[000] usage[00000000] duration[0]
(XEN) C0: usage[00000000] duration[2230680338]
(XEN) cpu1 cx acpi info:
(XEN) count = 1
(XEN) flags: bm_cntl[1], bm_chk[0], has_cst[0],
(XEN) pwr_setup_done[1], bm_rld_set[0]
(XEN) states[0]:
(XEN) reg.space_id = 0x0
(XEN) reg.bit_width = 0x0
(XEN) reg.bit_offset = 0x0
(XEN) reg.access_size = 0x0
(XEN) reg.address = 0x0
(XEN) type = 1
(XEN) latency = 0
(XEN) power = 0
(XEN) dp(@0x0000000000000000)
(XEN) ==cpu1==
(XEN) active state: C-1
(XEN) max_cstate: C7
(XEN) states:
(XEN) C1: type[C1] latency[000] usage[00000000] duration[0]
(XEN) C0: usage[00000000] duration[2230749165]
(XEN) cpu2 cx acpi info:
(XEN) count = 1
(XEN) flags: bm_cntl[1], bm_chk[0], has_cst[0],
(XEN) pwr_setup_done[1], bm_rld_set[0]
(XEN) states[0]:
(XEN) reg.space_id = 0x0
(XEN) reg.bit_width = 0x0
(XEN) reg.bit_offset = 0x0
(XEN) reg.access_size = 0x0
(XEN) reg.address = 0x0
(XEN) type = 1
(XEN) latency = 0
(XEN) power = 0
(XEN) dp(@0x0000000000000000)
(XEN) no cpu_id for acpi_id 2
(XEN) cpu3 cx acpi info:
(XEN) count = 1
(XEN) flags: bm_cntl[1], bm_chk[0], has_cst[0],
(XEN) pwr_setup_done[1], bm_rld_set[0]
(XEN) states[0]:
(XEN) reg.space_id = 0x0
(XEN) reg.bit_width = 0x0
(XEN) reg.bit_offset = 0x0
(XEN) reg.access_size = 0x0
(XEN) reg.address = 0x0
(XEN) type = 1
(XEN) latency = 0
(XEN) power = 0
(XEN) dp(@0x0000000000000000)
(XEN) no cpu_id for acpi_id 3
[-- Attachment #6: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
next reply other threads:[~2009-01-07 9:35 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-07 9:35 Carsten Schiers [this message]
2009-01-07 10:44 ` AMD P-States not recognized for Xen 3.3 and 3.4 Jan Beulich
2009-01-07 10:49 ` AW: " Carsten Schiers
2009-01-07 12:37 ` Jan Beulich
2009-01-07 20:22 ` Langsdorf, Mark
2009-01-07 21:02 ` AW: " Carsten Schiers
2009-01-07 21:07 ` Carsten Schiers
2009-01-07 21:53 ` Niraj Tolia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=26336541.151231320937178.JavaMail.root@uhura \
--to=carsten@schiers.de \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.