RE: [PATCH 1/4] arm64: dts: exynos5433: Add default GIC address cells

["Alim Akhtar" <alim.akhtar@samsung.com>]

Hi Krzysztof

> -----Original Message-----
> From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Sent: Friday, August 22, 2025 5:44 PM
> To: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>; Rob Herring
> <robh@kernel.org>; Krzysztof Kozlowski <krzk+dt@kernel.org>; Conor
> Dooley <conor+dt@kernel.org>; Alim Akhtar <alim.akhtar@samsung.com>;
> Peter Griffin <peter.griffin@linaro.org>; André Draszik
> <andre.draszik@linaro.org>; Tudor Ambarus <tudor.ambarus@linaro.org>;
> linux-fsd@tesla.com; linux-arm-kernel@lists.infradead.org; linux-samsung-
> soc@vger.kernel.org; devicetree@vger.kernel.org; linux-
> kernel@vger.kernel.org
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Subject: [PATCH 1/4] arm64: dts: exynos5433: Add default GIC address cells
> 
> Add missing address-cells 0 to GIC interrupt node to silence W=1
> warning:
> 
>   exynos5433-tm2-common.dtsi:1000.2-41: Warning (interrupt_map):
> /soc@0/pcie@15700000:interrupt-map:
>     Missing property '#address-cells' in node /soc@0/interrupt-
> controller@11001000, using 0 as fallbac
> 
> Value '0' is correct because:
> 1. GIC interrupt controller does not have children, 2. interrupt-map property
> (in PCI node) consists of five components and
>    the fourth component "parent unit address", which size is defined by
>    '#address-cells' of the node pointed to by the interrupt-parent
>    component, is not used (=0).
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---

Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>

>  arch/arm64/boot/dts/exynos/exynos5433.dtsi | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> index 0b9053b9b2b5..fa2029e280a5 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
> @@ -937,6 +937,7 @@ reboot: syscon-reboot {
> 
>  		gic: interrupt-controller@11001000 {
>  			compatible = "arm,gic-400";
> +			#address-cells = <0>;
>  			#interrupt-cells = <3>;
>  			interrupt-controller;
>  			reg = <0x11001000 0x1000>,
> --
> 2.48.1