From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mahmood Naderan Date: Wed, 01 Sep 2010 16:57:14 +0000 Subject: Re: [lm-sensors] lmsensors doesn't detect core-i7 sensors Message-Id: <265904.16463.qm@web50001.mail.re2.yahoo.com> MIME-Version: 1 Content-Type: multipart/mixed; boundary="===============9106538354246706045==" List-Id: References: <929339.59525.qm@web50002.mail.re2.yahoo.com> In-Reply-To: <929339.59525.qm@web50002.mail.re2.yahoo.com> To: lm-sensors@vger.kernel.org --===============9106538354246706045== Content-Type: multipart/alternative; boundary="0-1378397757-1283360234=:16463" --0-1378397757-1283360234=:16463 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable >=A0 sudo aptitude reinstall lm-sensors=0AThat didn't work. So I managed to= completely remove lm-sensors with "sudo =0Aapt-get --purge remove lm-senso= rs".=0AAfter that I enterd progs/detect and ran "sudo ./sensors-detect":=0A= =0Amahmood@localhost:detect$ sudo ./sensors-detect=0A# sensors-detect revis= ion 5853 (2010-08-13 02:00:13 +0430)=0A# System: Gigabyte Technology Co., L= td. P55-USB3=0AThis program will help you determine which kernel modules yo= u need=0Ato load to use lm_sensors most effectively. It is generally safe= =0Aand recommended to accept the default answers to all questions,=0Aunless= you know what you're doing.=0ASome south bridges, CPUs or memory controlle= rs contain embedded sensors.=0ADo you want to scan for them? This is totall= y safe. (YES/no): y=0ASilicon Integrated Systems SIS5595...=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AVIA VT82C686 Integ= rated Sensors...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0 No=0AVIA VT8231 Integrated Sensors...=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AAMD K8= thermal sensors...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AAMD Family 10h therma= l sensors...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0 No=0AAMD Family 11h thermal sensors...=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AIntel Core f= amily thermal sensor...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0 Success!=0A=A0=A0=A0 (driver `coretemp')=0AIntel Atom= thermal sensor...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AIntel AMB FB-DIMM thermal sensor.= ..=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 = No=0AVIA C7 thermal sensor...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AVIA Nano = thermal sensor...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0ASome Super I/O chips contai= n embedded sensors. We have to write to=0Astandard I/O ports to probe them.= This is usually safe.=0ADo you want to scan for Super I/O sensors? (YES/no= ): y=0AProbing for Super-I/O at 0x2e/0x2f=0ATrying family `National Semicon= ductor'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0ATryin= g family `SMSC'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0ATrying family `VIA= /Winbond/Nuvoton/Fintek'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0A= Trying family `ITE'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Yes=0AFound `I= TE IT8720F Super IO Sensors'=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0 Success!=0A=A0=A0=A0 (address 0x290, driver `it87'= )=0AProbing for Super-I/O at 0x4e/0x4f=0ATrying family `National Semiconduc= tor'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0ATrying f= amily `SMSC'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0ATrying family `VIA/Wi= nbond/Nuvoton/Fintek'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0ATry= ing family `ITE'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0ASome systems= (mainly servers) implement IPMI, a set of common interfaces=0Athrough whic= h system health data may be retrieved, amongst other things.=0AWe first try= to get the information from SMBIOS. If we don't find it=0Athere, we have t= o read from arbitrary I/O ports to probe for such=0Ainterfaces. This is nor= mally safe. Do you want to scan for IPMI=0Ainterfaces? (YES/no): y=0AProbin= g for `IPMI BMC KCS' at 0xca0...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0 No=0AProbing for `IPMI BMC SMIC' at 0xca8...=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0ASome hardware moni= toring chips are accessible through the ISA I/O ports.=0AWe have to write t= o arbitrary I/O ports to probe them. This is usually=0Asafe though. Yes, yo= u do have ISA I/O ports even if you do not have any=0AISA slots! Do you wan= t to scan the ISA I/O ports? (yes/NO): y=0AProbing for `National Semiconduc= tor LM78' at 0x290...=A0=A0=A0=A0=A0=A0 No=0AProbing for `National Semicond= uctor LM79' at 0x290...=A0=A0=A0=A0=A0=A0 No=0AProbing for `Winbond W83781D= ' at 0x290...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0APr= obing for `Winbond W83782D' at 0x290...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0 No=0ALastly, we can probe the I2C/SMBus adapters for con= nected hardware=0Amonitoring devices. This is the most risky part, and whil= e it works=0Areasonably well on most systems, it has been reported to cause= trouble=0Aon some systems.=0ADo you want to probe the I2C/SMBus adapters n= ow? (YES/no): y=0AUsing driver `i2c-i801' for device 0000:00:1f.3: Intel 34= 00/5 Series (PCH)=0AModule i2c-i801 loaded successfully.=0AModule i2c-dev l= oaded successfully.=0ANext adapter: NVIDIA i2c adapter=A0 (i2c-0)=0ADo you = want to scan it? (YES/no/selectively): y=0ANext adapter: NVIDIA i2c adapter= =A0 (i2c-1)=0ADo you want to scan it? (YES/no/selectively): y=0AClient foun= d at address 0x49=0AProbing for `National Semiconductor LM75'...=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbing for `Dallas Semiconductor= DS75'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbing f= or `National Semiconductor LM77'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0 No=0AProbing for `Dallas Semiconductor DS1621/DS1631'...=A0=A0=A0=A0= =A0=A0=A0=A0 No=0AProbing for `National Semiconductor LM73'...=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbing for `National Semiconductor = LM92'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbing for `Nat= ional Semiconductor LM76'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 N= o=0AProbing for `Maxim MAX6633/MAX6634/MAX6635'...=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0 No=0AClient found at address 0x50=0AProbing for `Analog Dev= ices ADM1033'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0 No=0AProbing for `Analog Devices ADM1034'...=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbing for `SPD EEPROM'...=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 No=0AProbing for `EDID EEPROM'...=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Yes=0A= =A0=A0=A0 (confidence 8, not a hardware monitoring chip)=0ANext adapter: NV= IDIA i2c adapter=A0 (i2c-2)=0ADo you want to scan it? (YES/no/selectively):= y=0ANext adapter: NVIDIA i2c adapter=A0 (i2c-3)=0ADo you want to scan it? = (YES/no/selectively): y=0ANext adapter: NVIDIA i2c adapter=A0 (i2c-4)=0ADo = you want to scan it? (YES/no/selectively): y=0ANext adapter: NVIDIA i2c ada= pter=A0 (i2c-5)=0ADo you want to scan it? (YES/no/selectively): y=0ANext ad= apter: NVIDIA i2c adapter=A0 (i2c-6)=0ADo you want to scan it? (YES/no/sele= ctively): y=0ANext adapter: NVIDIA i2c adapter=A0 (i2c-7)=0ADo you want to = scan it? (YES/no/selectively): y=0ANext adapter: SMBus I801 adapter at 0500= (i2c-8)=0ADo you want to scan it? (yes/NO/selectively): y=0AClient found a= t address 0x4e=0AProbing for `National Semiconductor LM75'...=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbing for `Dallas Semiconductor DS= 75'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbing for = `Dallas Semiconductor DS1621/DS1631'...=A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbin= g for `Analog Devices ADM1021'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0 No=0AProbing for `Analog Devices ADM1021A/ADM1023'...=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbing for `Maxim MAX1617'...=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0 No=0AProbing for `Maxim MAX1617A'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbing for `Maxim= MAX1668'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbing for `Maxim MAX1805'...=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No= =0AProbing for `Maxim MAX1989'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbing for `Maxim MAX66= 55/MAX6656'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0 No=0AProbing for `TI THMC10'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbing f= or `National Semiconductor LM84'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0 No=0AProbing for `Genesys Logic GL523SM'...=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbing for `Onsemi MC1066'...= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 No=0AProbing for `Maxim MAX1618'...=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbing f= or `Maxim MAX1619'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbing for `National Semiconductor = LM82/LM83'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbing for `Maxim MAX6654= '...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0 No=0AProbing for `Maxim MAX6690'...=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0APro= bing for `Maxim MAX6659'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbing for `Maxim MAX6647'...= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0 No=0AProbing for `Maxim MAX6680/MAX6681'...=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbing for `Texas Instr= uments TMP411'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No= =0AProbing for `Texas Instruments TMP421'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbing for `Texas Instruments TMP422'...=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbing for `Texas= Instruments AMC6821'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= No=0AProbing for `National Semiconductor LM64'...=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0 No=0AProbing for `National Semiconductor LM73'...=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbing for `Maxim MAX6633/= MAX6634/MAX6635'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbing for= `Fintek F75121R/F75122R/RG (VID+GPIO)'...=A0=A0=A0=A0=A0=A0 No=0AProbing f= or `Fintek F75111R/RG/N (GPIO)'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0 No=0AProbing for `ITE IT8201R/IT8203R/IT8206R/IT8266R'...=A0=A0= =A0=A0=A0=A0=A0 Yes=0A=A0=A0=A0 (confidence 6, not a hardware monitoring ch= ip)=0AClient found at address 0x52=0AProbing for `Analog Devices ADM1033'..= .=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbing = for `Analog Devices ADM1034'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0 No=0AProbing for `SPD EEPROM'...=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No= =0AClient found at address 0x53=0AProbing for `Analog Devices ADM1033'...= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0AProbing f= or `Analog Devices ADM1034'...=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0 No=0AProbing for `SPD EEPROM'...=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 No=0A= Now follows a summary of the probes I have just done.=0AJust press ENTER to= continue:=0ADriver `it87':=0A=A0 * ISA bus, address 0x290=0A=A0=A0=A0 Chip= `ITE IT8720F Super IO Sensors' (confidence: 9)=0ADriver `coretemp':=0A=A0 = * Chip `Intel Core family thermal sensor' (confidence: 9)=0ADo you want to = overwrite /etc/sysconfig/lm_sensors? (YES/no): yes=0ACopy prog/init/lm_sens= ors.init to /etc/init.d/lm_sensors=0Afor initialization at boot time.=0AYou= should now start the lm_sensors service to load the required=0Akernel modu= les.=0AUnloading i2c-dev... OK=0AUnloading i2c-i801... OK=0A=A0=0AAs you se= e, core-i7 is detected. Also it says: "Copy prog/init/lm_sensors.init =0Ato= /etc/init.d/lm_sensors=0Afor initialization at boot time." I did that. =0A= =A0=0ANow shat should I do in the next step? I don't want to reboot. What i= s the =0Acommand to restart the service?=0A=A0=0A// Naderan *Mahmood;=0A=0A= =0A=0A=0A________________________________=0AFrom: Guenter Roeck =0ATo: Mahmood Naderan =0ACc: lm-sen= sors =0ASent: Wed, September 1, 2010 8:22:03 PM= =0ASubject: Re: [lm-sensors] lmsensors doesn't detect core-i7 sensors=0A=0A= On Wed, Sep 01, 2010 at 10:58:47AM -0400, Mahmood Naderan wrote:=0A> >The c= urrent text is quite absolute ("Copy prog/init/lm_sensors.init to =0A>/etc/= init.d/lm_sensors")=0A> >and really invites users to overwrite the distribu= tion specific scripts.=0A> =0A> I really did that. See:=0A> =0A[...]=0A=0A>= Do you confirm that? What should I do in order to remove lm-sensor and =0A= >reinstall it again?=0A> =0ATry=0A=0A=A0=A0=A0 sudo aptitude reinstall lm-s= ensors=0A=0AGuenter=0A=0A=0A=0A --0-1378397757-1283360234=:16463 Content-Type: text/html; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable

>  sudo aptitude reinstall lm-sensors

=0A

That didn't work. So I= managed to completely remove lm-sensors with "sudo apt-get --purge remove = lm-sensors".

=0A

After that I enterd progs/detect and ran "sudo ./sensors-detect":<= /FONT>

=0A


mahmood@lo= calhost:detect$ sudo ./sensors-detect
# sensors-detect revision 5853= (2010-08-13 02:00:13 +0430)
# System: Gigabyte Technology Co., Ltd. P55= -USB3

=0A

This program will help you determine which kernel modules yo= u need
to load to use lm_sensors most effectively. It is generally safe<= BR>and recommended to accept the default answers to all questions,
unles= s you know what you're doing.

=0A

Some south bridges, CPUs or memory c= ontrollers contain embedded sensors.
Do you want to scan for them? This = is totally safe. (YES/no): y
Silicon Integrated Systems SIS5595... =             &nb= sp;         No
VIA VT82C686 Inte= grated Sensors...         &nbs= p;            &= nbsp;   No
VIA VT8231 Integrated Sensors...   &= nbsp;           &nbs= p;            No
= AMD K8 thermal sensors...        &n= bsp;            = ;            &n= bsp; No
AMD Family 10h thermal sensors...         &n= bsp;            = ;     No
AMD Family 11h thermal sensors... &nbs= p;            &= nbsp;            No<= BR>Intel Core family thermal sensor...  &nb= sp;            =           Success!
&= nbsp;   (driver `coretemp')
Intel Atom thermal sensor... =             &nb= sp;            =       No
Intel AMB FB-DIMM thermal sensor...           = ;            &n= bsp; No
VIA C7 thermal sensor...      &nbs= p;            &= nbsp;           &nbs= p;    No
VIA Nano thermal sensor...   &nbs= p;            &= nbsp;           &nbs= p;     No

=0A

Some Super I/O chips contain embedde= d sensors. We have to write to
standard I/O ports to probe them. This is= usually safe.
Do you want to scan for Super I/O sensors? (YES/no): yProbing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconducto= r'...           &nbs= p;       No
Trying family `SMSC'... &= nbsp;           &nbs= p;            &= nbsp;          No
Trying fa= mily `VIA/Winbond/Nuvoton/Fintek'...      &nb= sp;        No
T= rying family `ITE'...           =             &nb= sp;            =   Yes
Found `ITE IT8720F Super IO Sensors'    &= nbsp;           &nbs= p;       Success!
   = ; (address 0x290, driver `it87')
Probing for Super-I/O at 0x4e/0x4f
T= rying family `National Semiconductor'...      = ;             N= o
Trying family `SMSC'...        = ;            &n= bsp;            = ;    No
Trying family `VIA/Winbond/Nuvoton/Fintek'...       &= nbsp;       No
Trying family `ITE'... = ;            &n= bsp;            = ;            No

= =0A

Some systems (mainly servers) implement IPMI, a set of common interfa= ces
through which system health data may be retrieved, amongst other thi= ngs.
We first try to get the information from SMBIOS. If we don't find i= t
there, we have to read from arbitrary I/O ports to probe for such
i= nterfaces. This is normally safe. Do you want to scan for IPMI
interface= s? (YES/no): y
Probing for `IPMI BMC KCS' at 0xca0...   &= nbsp;           &nbs= p;      No
Probing for `IPMI BMC SMIC' at 0xca8= ...            =          No

=0A

Some hardware = monitoring chips are accessible through the ISA I/O ports.
We have to wr= ite to arbitrary I/O ports to probe them. This is usually
safe though. Y= es, you do have ISA I/O ports even if you do not have any
ISA slots! Do = you want to scan the ISA I/O ports? (yes/NO): y
Probing for `National Se= miconductor LM78' at 0x290...       No
Pro= bing for `National Semiconductor LM79' at 0x290...    &= nbsp;  No
Probing for `Winbond W83781D' at 0x290...  &nbs= p;            &= nbsp;   No
Probing for `Winbond W83782D' at 0x290... &nbs= p;            &= nbsp;    No

=0A

Lastly, we can probe the I2C/SMBus adap= ters for connected hardware
monitoring devices. This is the most risky p= art, and while it works
reasonably well on most systems, it has been rep= orted to cause trouble
on some systems.
Do you want to probe the I2C/= SMBus adapters now? (YES/no): y
Using driver `i2c-i801' for device 0000:= 00:1f.3: Intel 3400/5 Series (PCH)
Module i2c-i801 loaded successfully.<= BR>Module i2c-dev loaded successfully.

=0A

Next adapter: NVIDIA i2c ad= apter  (i2c-0)
Do you want to scan it? (YES/no/selectively): y

= =0A

Next adapter: NVIDIA i2c adapter  (i2c-1)
Do you want to scan= it? (YES/no/selectively): y
Client found at address 0x49
Probing for= `National Semiconductor LM75'...       =          No
Probing for `Dallas = Semiconductor DS75'...         = ;         No
Probing for `Nation= al Semiconductor LM77'...        &n= bsp;       No
Probing for `Dallas Semicond= uctor DS1621/DS1631'...         No<= BR>Probing for `National Semiconductor LM73'...    &nbs= p;           No
Probin= g for `National Semiconductor LM92'...      &= nbsp;         No
Probing for `National Semiconductor LM76'...       =          No
Probing for `Maxim M= AX6633/MAX6634/MAX6635'...        &= nbsp;     No
Client found at address 0x50
Probing= for `Analog Devices ADM1033'...       &= nbsp;           &nbs= p; No
Probing for `Analog Devices ADM1034'...    &nb= sp;            =     No
Probing for `SPD EEPROM'...    = ;            &n= bsp;            = ;    No
Probing for `EDID EEPROM'...          &nbs= p;            &= nbsp;        Yes
  &= nbsp; (confidence 8, not a hardware monitoring chip)

=0A

Next adapter:= NVIDIA i2c adapter  (i2c-2)
Do you want to scan it? (YES/no/select= ively): y

=0A

Next adapter: NVIDIA i2c adapter  (i2c-3)
Do you= want to scan it? (YES/no/selectively): y

=0A

Next adapter: NVIDIA i2c= adapter  (i2c-4)
Do you want to scan it? (YES/no/selectively): y=0A

Next adapter: NVIDIA i2c adapter  (i2c-5)
Do you want to sc= an it? (YES/no/selectively): y

=0A

Next adapter: NVIDIA i2c adapter&nb= sp; (i2c-6)
Do you want to scan it? (YES/no/selectively): y

=0A

Nex= t adapter: NVIDIA i2c adapter  (i2c-7)
Do you want to scan it? (YES= /no/selectively): y

=0A

Next adapter: SMBus I801 adapter at 0500 (i2c-= 8)
Do you want to scan it? (yes/NO/selectively): y
Client found at ad= dress 0x4e
Probing for `National Semiconductor LM75'...   = ;             N= o
Probing for `Dallas Semiconductor DS75'...    &nbs= p;             = No
Probing for `Dallas Semiconductor DS1621/DS1631'...   =       No
Probing for `Analog Devices ADM1021'..= .            &n= bsp;        No
Probing for `Analog De= vices ADM1021A/ADM1023'...        &= nbsp;   No
Probing for `Maxim MAX1617'...          &nb= sp;            =        No
Probing for `Maxim MAX1617A'...&= nbsp;           &nbs= p;            &= nbsp;   No
Probing for `Maxim MAX1668'...   &nb= sp;            =             &nb= sp; No
Probing for `Maxim MAX1805'...      = ;            &n= bsp;           No
Prob= ing for `Maxim MAX1989'...          &nb= sp;            =        No
Probing for `Maxim MAX6655/MAX66= 56'...           &nb= sp;          No
Probing for= `TI THMC10'...          =             &nb= sp;           No
Probi= ng for `National Semiconductor LM84'...      =           No
Probing for `G= enesys Logic GL523SM'...        &nb= sp;            = No
Probing for `Onsemi MC1066'...          &nbs= p;            &= nbsp;      No
Probing for `Maxim MAX1618'...&nb= sp;            =             &nb= sp;    No
Probing for `Maxim MAX1619'...   = ;            &n= bsp;            = ;  No
Probing for `National Semiconductor LM82/LM83'...  =          No
Probing for `Maxim M= AX6654'...           = ;            &n= bsp;      No
Probing for `Maxim MAX6690'...          &nb= sp;            =        No
Probing for `Maxim MAX6659'...&n= bsp;            = ;            &n= bsp;    No
Probing for `Maxim MAX6647'...  &nbs= p;            &= nbsp;           &nbs= p;  No
Probing for `Maxim MAX6680/MAX6681'...   &nbs= p;            &= nbsp;     No
Probing for `Texas Instruments TMP411'.= ..            &= nbsp;      No
Probing for `Texas Instruments TMP421'...        &nbs= p;          No
Probing for = `Texas Instruments TMP422'...       &nbs= p;           No
Probin= g for `Texas Instruments AMC6821'...      &nb= sp;           No
Probi= ng for `National Semiconductor LM64'...      =           No
Probing for `N= ational Semiconductor LM73'...       &nb= sp;        No
Probing for `Maxim MAX6= 633/MAX6634/MAX6635'...        &nbs= p;     No
Probing for `Fintek F75121R/F75122R/RG (VI= D+GPIO)'...       No
Probing for `Fintek F75111R/RG/N (GPIO)'...       &= nbsp;         No
Probing for `IT= E IT8201R/IT8203R/IT8206R/IT8266R'...      &n= bsp; Yes
    (confidence 6, not a hardware monitoring chi= p)
Client found at address 0x52
Probing for `Analog Devices ADM1033'.= ..            &= nbsp;        No
Probing for `Analog D= evices ADM1034'...         &nb= sp;           No
Probi= ng for `SPD EEPROM'...         = ;            &n= bsp;           No
Clie= nt found at address 0x53
Probing for `Analog Devices ADM1033'...          &nb= sp;          No
Probing for= `Analog Devices ADM1034'...        = ;             N= o
Probing for `SPD EEPROM'...       &= nbsp;           &nbs= p;             = No

=0A

Now follows a summary of the probes I have just done.
Just p= ress ENTER to continue:

=0A

Driver `it87':
  * ISA bus, addres= s 0x290
    Chip `ITE IT8720F Super IO Sensors' (confiden= ce: 9)

=0A

Driver `coretemp':
  * Chip `Intel Core family ther= mal sensor' (confidence: 9)

=0A

Do you want to overwrite /etc/sysconfi= g/lm_sensors? (YES/no): yes
Copy prog/init= /lm_sensors.init to /etc/init.d/lm_sensors
for initialization at boot ti= me.
You should now start the lm_sensors service to load = the required
kernel modules.

=0A

Unloading i2c-dev... OK
Unloadi= ng i2c-i801... OK

=0A

 

=0A
=0A
As you see, core-i7 is detected. Als= o it says: "Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensors
for= initialization at boot time." I did that.
=0A
 
=0A
Now shat should I do in= the next step? I don't want to reboot. What is the command to restart the = service?
 
=0A
=0A

=0A
=0A
=0AFrom: Guenter Roeck= <guenter.roeck@ericsson.com>
To: Mahmood Naderan <nt_mahmood@yahoo.com>
Cc: lm-sensors <lm-sensors@lm-senso= rs.org>
Sent: Wed, Se= ptember 1, 2010 8:22:03 PM
Subject:= Re: [lm-sensors] lmsensors doesn't detect core-i7 sensors

On Wed, Sep 01, 2010 at 10:58:47AM -0400, Mahmood Naderan wrote:> >The current text is quite absolute ("Copy prog/init/lm_sensors.i= nit to /etc/init.d/lm_sensors")
> >and really invites users to ove= rwrite the distribution specific scripts.
>
> I really did tha= t. See:
>
[...]

> Do you confirm that? What should I do= in order to remove lm-sensor and reinstall it again?
>
Try

    sudo aptitude reinstall lm-sensors
Guenter

=0A=0A=0A=0A=0A=0A=0A=0A --0-1378397757-1283360234=:16463-- --===============9106538354246706045== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors --===============9106538354246706045==--