All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Jernej Škrabec" <jernej.skrabec@gmail.com>
To: Samuel Holland <samuel@sholland.org>,
	Anatolij Gustschin <agust@denx.de>,
	Andre Przywara <andre.przywara@arm.com>
Cc: Lukasz Majewski <lukma@denx.de>,
	Jagan Teki <jagan@amarulasolutions.com>,
	Sean Anderson <seanga2@gmail.com>,
	u-boot@lists.denx.de, linux-sunxi@lists.linux.dev
Subject: Re: [PATCH v2 1/2] video: sunxi: dw-hdmi: Use DM for clock gates and resets
Date: Sat, 08 Apr 2023 08:11:05 +0200	[thread overview]
Message-ID: <2674091.mvXUDI8C0e@jernej-laptop> (raw)
In-Reply-To: <20230408002639.26241-2-andre.przywara@arm.com>

Dne sobota, 08. april 2023 ob 02:26:38 CEST je Andre Przywara napisal(a):
> From: Samuel Holland <samuel@sholland.org>
> 
> This abstracts away the CCU register layout, which is necessary for
> supporting new SoCs like H6 with a reorganized CCU. One of the resets is
> referenced from the PHY node instead of the controller node, so it will
> have to wait until the PHY code is factored out to a separate driver.
> 
> Signed-off-by: Samuel Holland <samuel@sholland.org>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>

Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej

> ---
>  drivers/video/sunxi/sunxi_dw_hdmi.c | 27 +++++++++++++++++++++------
>  1 file changed, 21 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/video/sunxi/sunxi_dw_hdmi.c
> b/drivers/video/sunxi/sunxi_dw_hdmi.c index 4f5d0989286..ef18d1f281f 100644
> --- a/drivers/video/sunxi/sunxi_dw_hdmi.c
> +++ b/drivers/video/sunxi/sunxi_dw_hdmi.c
> @@ -5,12 +5,14 @@
>   * (C) Copyright 2017 Jernej Skrabec <jernej.skrabec@siol.net>
>   */
> 
> +#include <clk.h>
>  #include <common.h>
>  #include <display.h>
>  #include <dm.h>
>  #include <dw_hdmi.h>
>  #include <edid.h>
>  #include <log.h>
> +#include <reset.h>
>  #include <time.h>
>  #include <asm/io.h>
>  #include <asm/arch/clock.h>
> @@ -20,6 +22,8 @@
> 
>  struct sunxi_dw_hdmi_priv {
>  	struct dw_hdmi hdmi;
> +	struct reset_ctl_bulk resets;
> +	struct clk_bulk clocks;
>  };
> 
>  struct sunxi_hdmi_phy {
> @@ -336,14 +340,16 @@ static int sunxi_dw_hdmi_probe(struct udevice *dev)
>  	clrsetbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_PLL_MASK,
>  			CCM_HDMI_CTRL_PLL3);
> 
> -	/* Set ahb gating to pass */
> -	setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI);
> +	/* This reset is referenced from the PHY devicetree node. */
>  	setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI2);
> -	setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_HDMI);
> -	setbits_le32(&ccm->hdmi_slow_clk_cfg, 
CCM_HDMI_SLOW_CTRL_DDC_GATE);
> 
> -	/* Clock on */
> -	setbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_GATE);
> +	ret = reset_deassert_bulk(&priv->resets);
> +	if (ret)
> +		return ret;
> +
> +	ret = clk_enable_bulk(&priv->clocks);
> +	if (ret)
> +		return ret;
> 
>  	sunxi_dw_hdmi_phy_init(&priv->hdmi);
> 
> @@ -362,6 +368,7 @@ static int sunxi_dw_hdmi_of_to_plat(struct udevice *dev)
> {
>  	struct sunxi_dw_hdmi_priv *priv = dev_get_priv(dev);
>  	struct dw_hdmi *hdmi = &priv->hdmi;
> +	int ret;
> 
>  	hdmi->ioaddr = (ulong)dev_read_addr(dev);
>  	hdmi->i2c_clk_high = 0xd8;
> @@ -369,6 +376,14 @@ static int sunxi_dw_hdmi_of_to_plat(struct udevice
> *dev) hdmi->reg_io_width = 1;
>  	hdmi->phy_set = sunxi_dw_hdmi_phy_cfg;
> 
> +	ret = reset_get_bulk(dev, &priv->resets);
> +	if (ret)
> +		return ret;
> +
> +	ret = clk_get_bulk(dev, &priv->clocks);
> +	if (ret)
> +		return ret;
> +
>  	return 0;
>  }





  reply	other threads:[~2023-04-08  6:11 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-08  0:26 [PATCH v2 0/2] video: sunxi: dw-hdmi: complement partial OF conversion Andre Przywara
2023-04-08  0:26 ` [PATCH v2 1/2] video: sunxi: dw-hdmi: Use DM for clock gates and resets Andre Przywara
2023-04-08  6:11   ` Jernej Škrabec [this message]
2023-04-08  0:26 ` [PATCH v2 2/2] video: sunxi: dw-hdmi: Use DM for HVCC regulator Andre Przywara
2023-04-08  6:11   ` Jernej Škrabec

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2674091.mvXUDI8C0e@jernej-laptop \
    --to=jernej.skrabec@gmail.com \
    --cc=agust@denx.de \
    --cc=andre.przywara@arm.com \
    --cc=jagan@amarulasolutions.com \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=lukma@denx.de \
    --cc=samuel@sholland.org \
    --cc=seanga2@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.