All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: "Gabriel L. Somlo" <gsomlo@gmail.com>
Cc: LKML <linux-kernel@vger.kernel.org>,
	linux-serial <linux-serial@vger.kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jiri Slaby <jirislaby@kernel.org>,
	kgugala@antmicro.com, mholenko@antmicro.com, joel@jms.id.au,
	david.abdurachmanov@gmail.com, florent@enjoy-digital.fr,
	geert@linux-m68k.org
Subject: Re: [PATCH v4 12/14] serial: liteuart: add IRQ support for the RX path
Date: Fri, 18 Nov 2022 16:30:15 +0200 (EET)	[thread overview]
Message-ID: <26f43d54-7ee6-d05e-5c1c-4bc37f06077@linux.intel.com> (raw)
In-Reply-To: <Y3eWJNbcGJOMl7K1@errol.ini.cmu.edu>

[-- Attachment #1: Type: text/plain, Size: 3931 bytes --]

On Fri, 18 Nov 2022, Gabriel L. Somlo wrote:

> On Fri, Nov 18, 2022 at 03:58:47PM +0200, Ilpo Järvinen wrote:
> > On Wed, 16 Nov 2022, Gabriel Somlo wrote:
> > 
> > > Add support for IRQ-driven RX. Support for the TX path will be added
> > > in a separate commit.
> > > 
> > > Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
> > > ---
> > > 
> > > Changes from v3:
> > >   - add shadow irq register to support polling mode and avoid reading
> > >     hardware mmio irq register to learn which irq flags are enabled
> > >     - this also simplifies both liteuart_interrupt() and liteuart_startup()
> > > 
> > >  drivers/tty/serial/liteuart.c | 76 +++++++++++++++++++++++++++++++----
> > >  1 file changed, 69 insertions(+), 7 deletions(-)
> > > 
> > > diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c
> > > index 8a6e176be08e..fad778578986 100644
> > > --- a/drivers/tty/serial/liteuart.c
> > > +++ b/drivers/tty/serial/liteuart.c
> > > @@ -7,6 +7,7 @@
> > >  
> > >  #include <linux/bits.h>
> > >  #include <linux/console.h>
> > > +#include <linux/interrupt.h>
> > >  #include <linux/litex.h>
> > >  #include <linux/module.h>
> > >  #include <linux/of.h>
> > > @@ -46,6 +47,7 @@ struct liteuart_port {
> > >  	struct uart_port port;
> > >  	struct timer_list timer;
> > >  	u32 id;
> > > +	u8 irq_reg;
> > >  };
> > >  
> > >  #define to_liteuart_port(port)	container_of(port, struct liteuart_port, port)
> > > @@ -76,6 +78,19 @@ static void liteuart_putchar(struct uart_port *port, unsigned char ch)
> > >  	litex_write8(port->membase + OFF_RXTX, ch);
> > >  }
> > >  
> > > +static void liteuart_update_irq_reg(struct uart_port *port, bool set, u8 mask)
> > > +{
> > > +	struct liteuart_port *uart = to_liteuart_port(port);
> > > +
> > > +	if (set)
> > > +		uart->irq_reg |= mask;
> > > +	else
> > > +		uart->irq_reg &= ~mask;
> > > +
> > > +	if (port->irq)
> > > +		litex_write8(port->membase + OFF_EV_ENABLE, uart->irq_reg);
> > > +}
> > > +
> > >  static void liteuart_stop_tx(struct uart_port *port)
> > >  {
> > >  }
> > > @@ -129,13 +144,27 @@ static void liteuart_rx_chars(struct uart_port *port)
> > >  	tty_flip_buffer_push(&port->state->port);
> > >  }
> > >  
> > > +static irqreturn_t liteuart_interrupt(int irq, void *data)
> > > +{
> > > +	struct liteuart_port *uart = data;
> > > +	struct uart_port *port = &uart->port;
> > > +	u8 isr;
> > > +
> > > +	spin_lock(&port->lock);
> > > +	isr = litex_read8(port->membase + OFF_EV_PENDING) & uart->irq_reg;
> > > +	if (isr & EV_RX)
> > > +		liteuart_rx_chars(port);
> > > +	spin_unlock(&port->lock);
> > > +
> > > +	return IRQ_RETVAL(isr);
> > > +}
> > > +
> > >  static void liteuart_timer(struct timer_list *t)
> > >  {
> > >  	struct liteuart_port *uart = from_timer(uart, t, timer);
> > >  	struct uart_port *port = &uart->port;
> > >  
> > > -	liteuart_rx_chars(port);
> > > -
> > > +	liteuart_interrupt(0, port);
> > >  	mod_timer(&uart->timer, jiffies + uart_poll_timeout(port));
> > >  }
> > >  
> > > @@ -161,19 +190,45 @@ static unsigned int liteuart_get_mctrl(struct uart_port *port)
> > >  static int liteuart_startup(struct uart_port *port)
> > >  {
> > >  	struct liteuart_port *uart = to_liteuart_port(port);
> > > +	unsigned long flags;
> > > +	int ret;
> > >  
> > > -	/* disable events */
> > > -	litex_write8(port->membase + OFF_EV_ENABLE, 0);
> > > +	if (port->irq) {
> > > +		ret = request_irq(port->irq, liteuart_interrupt, 0,
> > > +				  KBUILD_MODNAME, uart);
> > > +		if (ret) {
> > > +			pr_err(pr_fmt("line %d irq %d failed: using polling\n"),
> > > +				port->line, port->irq);
> > 
> > dev_err() seems more appropriate here.
> 
> Makes sense, good thing `struct uart_port` has a `dev` field :)
> I've made the change, and lined it up for the upcoming v5 of the
> series.

Also that pr_fmt() should be dropped (in case you didn't already). It was 
in my mind ealier but should have stated it explicitly.


-- 
 i.

  reply	other threads:[~2022-11-18 14:30 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-16 14:48 [PATCH v4 00/14] serial: liteuart: add IRQ support Gabriel Somlo
2022-11-16 14:48 ` [PATCH v4 01/14] serial: liteuart: use KBUILD_MODNAME as driver name Gabriel Somlo
2022-11-16 14:48 ` [PATCH v4 02/14] serial: liteuart: use bit number macros Gabriel Somlo
2022-11-16 14:48 ` [PATCH v4 03/14] serial: liteuart: remove unused uart_ops stubs Gabriel Somlo
2022-11-16 14:48 ` [PATCH v4 04/14] serial: liteuart: don't set unused port fields Gabriel Somlo
2022-11-16 14:48 ` [PATCH v4 05/14] serial: liteuart: minor style fix in liteuart_init() Gabriel Somlo
2022-11-16 14:49 ` [PATCH v4 06/14] serial: liteuart: move tty_flip_buffer_push() out of rx loop Gabriel Somlo
2022-11-16 14:49 ` [PATCH v4 07/14] serial: liteuart: rx loop should only ack rx events Gabriel Somlo
2022-11-16 14:49 ` [PATCH v4 08/14] serial: liteuart: simplify passing of uart_insert_char() flag Gabriel Somlo
2022-11-16 14:49 ` [PATCH v4 09/14] serial: liteuart: fix rx loop variable types Gabriel Somlo
2022-11-16 14:49 ` [PATCH v4 10/14] serial: liteuart: separate rx loop from poll timer Gabriel Somlo
2022-11-16 14:49 ` [PATCH v4 11/14] serial: liteuart: move function definitions Gabriel Somlo
2022-11-16 14:49 ` [PATCH v4 12/14] serial: liteuart: add IRQ support for the RX path Gabriel Somlo
2022-11-18 13:58   ` Ilpo Järvinen
2022-11-18 14:26     ` Gabriel L. Somlo
2022-11-18 14:30       ` Ilpo Järvinen [this message]
2022-11-18 14:36         ` Gabriel L. Somlo
2022-11-16 14:49 ` [PATCH v4 13/14] serial: liteuart: add IRQ support for the TX path Gabriel Somlo
2022-11-18 14:01   ` Ilpo Järvinen
2022-11-16 14:49 ` [PATCH v4 14/14] serial: liteuart: move polling putchar() function Gabriel Somlo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=26f43d54-7ee6-d05e-5c1c-4bc37f06077@linux.intel.com \
    --to=ilpo.jarvinen@linux.intel.com \
    --cc=david.abdurachmanov@gmail.com \
    --cc=florent@enjoy-digital.fr \
    --cc=geert@linux-m68k.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=gsomlo@gmail.com \
    --cc=jirislaby@kernel.org \
    --cc=joel@jms.id.au \
    --cc=kgugala@antmicro.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=mholenko@antmicro.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.