From: "Jernej Škrabec" <jernej.skrabec@gmail.com>
To: Jagan Teki <jagan@amarulasolutions.com>,
linux-sunxi@lists.linux.dev,
Andre Przywara <andre.przywara@arm.com>
Cc: u-boot@lists.denx.de, Marc Zyngier <maz@kernel.org>,
James McGregor <james.mcgregor2@arm.com>
Subject: Re: [PATCH] sunxi: H616: Add OrangePi Zero 2W board support
Date: Tue, 30 Jan 2024 20:01:37 +0100 [thread overview]
Message-ID: <2715486.mvXUDI8C0e@jernej-laptop> (raw)
In-Reply-To: <20240130141642.2714470-1-andre.przywara@arm.com>
Dne torek, 30. januar 2024 ob 15:16:42 CET je Andre Przywara napisal(a):
> The OrangePi Zero 2W is a tiny development board featuring the Allwinner
> H618 SoC, shipping with up to 4GB of LPDDR4 DRAM, a mini-HDMI connector,
> two USB Type-C sockets and a 16MB SPI NOR flash.
> There is an FPC connector to connect an expansion board, which sports
> two more USB Type-A sockets and a 100MBit Ethernet port. Support for
> the expansion board is not in the DT yet, probably a DT overlay would
> cover this in the future.
>
> Add a defconfig file selecting the right drivers and DRAM options.
> Since the .dts file was synced from the Linux kernel repo already, we
> just need to add one line to the Makefile to actually build the .dtb.
>
> The DRAM parameters were derived from the values found in the BSP DRAM
> drivers on the SPI NOR flash.
>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Best regards,
Jernej
> ---
> arch/arm/dts/Makefile | 1 +
> board/sunxi/MAINTAINERS | 5 +++++
> configs/orangepi_zero2w_defconfig | 30 ++++++++++++++++++++++++++++++
> 3 files changed, 36 insertions(+)
> create mode 100644 configs/orangepi_zero2w_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 0d4b917fb3b..ed3978037ed 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -837,6 +837,7 @@ dtb-$(CONFIG_MACH_SUN50I_H6) += \
> sun50i-h6-tanix-tx6-mini.dtb
> dtb-$(CONFIG_MACH_SUN50I_H616) += \
> sun50i-h616-orangepi-zero2.dtb \
> + sun50i-h618-orangepi-zero2w.dtb \
> sun50i-h618-orangepi-zero3.dtb \
> sun50i-h618-transpeed-8k618-t.dtb \
> sun50i-h616-x96-mate.dtb
> diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
> index a2da6a4a7a2..4bcd9b9af7f 100644
> --- a/board/sunxi/MAINTAINERS
> +++ b/board/sunxi/MAINTAINERS
> @@ -460,6 +460,11 @@ M: Jernej Skrabec <jernej.skrabec@siol.net>
> S: Maintained
> F: configs/orangepi_zero2_defconfig
>
> +ORANGEPI ZERO 2W BOARD
> +M: Andre Przywara <andre.przywara@arm.com>
> +S: Maintained
> +F: configs/orangepi_zero2w_defconfig
> +
> ORANGEPI ZERO 3 BOARD
> M: Andre Przywara <andre.przywara@arm.com>
> S: Maintained
> diff --git a/configs/orangepi_zero2w_defconfig b/configs/orangepi_zero2w_defconfig
> new file mode 100644
> index 00000000000..5734d9d839c
> --- /dev/null
> +++ b/configs/orangepi_zero2w_defconfig
> @@ -0,0 +1,30 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SUNXI=y
> +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h618-orangepi-zero2w"
> +CONFIG_SPL=y
> +CONFIG_DRAM_SUN50I_H616_DX_ODT=0x07070707
> +CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e
> +CONFIG_DRAM_SUN50I_H616_CA_DRI=0x0e0e
> +CONFIG_DRAM_SUN50I_H616_ODT_EN=0xaaaaeeee
> +CONFIG_DRAM_SUN50I_H616_TPR6=0x48808080
> +CONFIG_DRAM_SUN50I_H616_TPR10=0x402f6663
> +CONFIG_DRAM_SUN50I_H616_TPR11=0x26262524
> +CONFIG_DRAM_SUN50I_H616_TPR12=0x100f100f
> +CONFIG_MACH_SUN50I_H616=y
> +CONFIG_SUNXI_DRAM_H616_LPDDR4=y
> +CONFIG_DRAM_CLK=792
> +CONFIG_R_I2C_ENABLE=y
> +CONFIG_SPL_SPI_SUNXI=y
> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> +CONFIG_SPL_I2C=y
> +CONFIG_SPL_SYS_I2C_LEGACY=y
> +CONFIG_SYS_I2C_MVTWSI=y
> +CONFIG_SYS_I2C_SLAVE=0x7f
> +CONFIG_SYS_I2C_SPEED=400000
> +CONFIG_MTD=y
> +CONFIG_SPI_FLASH_ZBIT=y
> +CONFIG_AXP313_POWER=y
> +CONFIG_SPI=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_OHCI_HCD=y
> +CONFIG_USB_MUSB_GADGET=y
>
prev parent reply other threads:[~2024-01-30 19:01 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-30 14:16 [PATCH] sunxi: H616: Add OrangePi Zero 2W board support Andre Przywara
2024-01-30 19:01 ` Jernej Škrabec [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2715486.mvXUDI8C0e@jernej-laptop \
--to=jernej.skrabec@gmail.com \
--cc=andre.przywara@arm.com \
--cc=jagan@amarulasolutions.com \
--cc=james.mcgregor2@arm.com \
--cc=linux-sunxi@lists.linux.dev \
--cc=maz@kernel.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.