Re: [PATCH v8 net-next 03/10] net: phy: Add support for LAN937x T1 phy driver

[Prasanna Vengateshan <prasanna.vengateshan@microchip.com>]

On Tue, 2022-02-08 at 14:09 +0100, Andrew Lunn wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> content is safe
> 
> On Mon, Feb 07, 2022 at 10:51:57PM +0530, Prasanna Vengateshan wrote:
> > Added support for Microchip LAN937x T1 phy driver. The sequence of
> > initialization is used commonly for both LAN87xx and LAN937x
> > drivers. The new initialization sequence is an improvement to
> > existing LAN87xx and it is shared with LAN937x.
> > 
> > Also relevant comments are added in the existing code and existing
> > soft-reset customized code has been replaced with
> > genphy_soft_reset().
> > 
> > access_ereg_clr_poll_timeout() API is introduced for polling phy
> > bank write and this is linked with PHYACC_ATTR_MODE_POLL.
> > 
> > Finally introduced function table for LAN937X_T1_PHY_ID along with
> > microchip_t1_phy_driver struct.
> 
> Hi Prasanna
> 
> That is a lot of changes in one patch.
> 
> I would suggest you make this a patch series of its own. It should be
> independent of the switch changes. And then you can break this patch
> up into a number of smaller patches.
> 
> Thanks
>         Andrew

Sure, i will submit as a seperate patch series and i will remove from this
patch. Thanks.

Prasanna V