ath10k-firmware: QCA4019 hw1.0: Update OpenMesh A62 specific BDFs

From: Sven Eckelmann <seckelmann@datto.com>
To: ath10k@lists.infradead.org
Subject: ath10k-firmware: QCA4019 hw1.0: Update OpenMesh A62 specific BDFs
Date: Thu, 10 Jan 2019 13:59:14 +0100	[thread overview]
Message-ID: <2795259.fejyDvFH3e@bentobox> (raw)

[-- Attachment #1.1.1: Type: text/plain, Size: 1707 bytes --]

Hi,

The OpenMesh A62 AP requires three special BDFs to get the Wi-Fi PHYs working 
(correctly). The  bmi-board-id='s would clash with one of the the IPQ401X 
AP-DK boards because QCA doesn't provide special IDs for customers and seems 
to use the AP-DK board-ids in the wifi firmware to change its behavior. This 
request contains the two files for QCA4019. The QCA9888 one will be submitted 
in a different request.

This update contains:

* add of the antenna gain
* adjustments of the antenna sensitivity (see minCCA power threshold and
  configAddr)
* CTLs for DFS channels

Now to the questions from the wiki page [1]:

* description for what hardware this is:

  - it is a QCA4018 based module (based on qcom-ipq4019-ap.dk04.1)
  - one QCA4018 radio is used as 2.4GHz radio
  - one QCA4018 radio is used as 5GHz radio
  - an additional QCA9888 5GHz radio is attached via PCI

* origin of the board file (did you create it yourself or where you
  downloaded)

  - it was created by the ODM and QCA for the OpenMesh A62
  - was provided by the ODM to OpenMesh for this product (this includes
    distribution)
  - it is the latest release from 2018-11-28

* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)

  - QCA4019 hw1.0

    + bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=OM-A62
      md5sum: 8c4ab812be4c62d4f5eae26125efc407
    + bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=OM-A62
      md5sum: 170400a46d78f2adf82f16ac3fac0abf

* attach the actual board file (board.bin)

  - The name of the files are equal to the id string in the board-2.bin
    (minus the ".bin")

Kind regards,
        Sven

[1] https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles

[-- Attachment #1.1.2: bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=OM-A62.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]

[-- Attachment #1.1.3: bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=OM-A62.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]

[-- Attachment #1.2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 146 bytes --]

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k