All of lore.kernel.org
 help / color / mirror / Atom feed
From: Phil Lobbes <phil@perkpartners.com>
To: Linux RAID Mailing List <linux-raid@vger.kernel.org>
Subject: Re: RAID1 == two different ARRAY in scan, and Q on read error corrected
Date: Sat, 19 Apr 2008 13:26:16 -0400	[thread overview]
Message-ID: <28126.1208625976@perkpartners.com> (raw)
In-Reply-To: <480963D0.70307@sauce.co.nz>

> The error was:
> 
> Apr 18 14:01:45  smartd[2104]: Device: /dev/sdc, 3 Currently
> unreadable (pending) sectors
> 
> These are not ECC errors and the definition I have for pending sector
> errors is, "Current count of unstable sectors (waiting for
> remapping)."
>
> It would be useful to see the Reallocated Sectors Count from the
> smartctl output.

Here's the requested count:

  5 Reallocated_Sector_Ct   0x0033   251   251   063    Pre-fail  Always       -       22

And the full set in case it helps give a clearer picture...

Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  3 Spin_Up_Time            0x0027   186   181   063    Pre-fail  Always       -       24376
  4 Start_Stop_Count        0x0032   252   252   000    Old_age   Always       -       1988
  5 Reallocated_Sector_Ct   0x0033   251   251   063    Pre-fail  Always       -       22
  6 Read_Channel_Margin     0x0001   253   253   100    Pre-fail  Offline      -       0
  7 Seek_Error_Rate         0x000a   253   252   000    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0027   240   224   187    Pre-fail  Always       -       64525
  9 Power_On_Minutes        0x0032   170   170   000    Old_age   Always       -       614h+37m
 10 Spin_Retry_Count        0x002b   253   252   157    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x002b   253   252   223    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   253   253   000    Old_age   Always       -       6
192 Power-Off_Retract_Count 0x0032   253   253   000    Old_age   Always       -       0
193 Load_Cycle_Count        0x0032   253   253   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0032   001   253   000    Old_age   Always       -       53
195 Hardware_ECC_Recovered  0x000a   252   204   000    Old_age   Always       -       39547
196 Reallocated_Event_Count 0x0008   253   253   000    Old_age   Offline      -       0
197 Current_Pending_Sector  0x0008   253   253   000    Old_age   Offline      -       3
198 Offline_Uncorrectable   0x0008   253   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0008   199   199   000    Old_age   Offline      -       0
200 Multi_Zone_Error_Rate   0x000a   253   252   000    Old_age   Always       -       0
201 Soft_Read_Error_Rate    0x000a   253   252   000    Old_age   Always       -       0
202 TA_Increase_Count       0x000a   253   001   000    Old_age   Always       -       0
203 Run_Out_Cancel          0x000b   253   076   180    Pre-fail  Always   In_the_past 0
204 Shock_Count_Write_Opern 0x000a   253   252   000    Old_age   Always       -       0
205 Shock_Rate_Write_Opern  0x000a   253   252   000    Old_age   Always       -       0
207 Spin_High_Current       0x002a   253   252   000    Old_age   Always       -       0
208 Spin_Buzz               0x002a   253   252   000    Old_age   Always       -       0
209 Offline_Seek_Performnce 0x0024   239   239   000    Old_age   Offline      -       169
210 Unknown_Attribute       0x0032   253   252   000    Old_age   Always       -       0
211 Unknown_Attribute       0x0032   253   252   000    Old_age   Always       -       0
212 Unknown_Attribute       0x0032   253   253   000    Old_age   Always       -       0

  reply	other threads:[~2008-04-19 17:26 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-04-18 19:35 RAID1 == two different ARRAY in scan, and Q on read error corrected Phil Lobbes
2008-04-18 22:02 ` Richard Scobie
2008-04-18 23:49   ` David Lethe
2008-04-19  3:15     ` Richard Scobie
2008-04-19 17:26       ` Phil Lobbes [this message]
2008-04-19 19:58         ` Richard Scobie
2008-04-19 20:43           ` David Lethe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=28126.1208625976@perkpartners.com \
    --to=phil@perkpartners.com \
    --cc=linux-raid@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.