From: Rojhalat Ibrahim <imr@rtschenk.de>
To: "linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>,
netdev@vger.kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>,
Alexandre Courbot <acourbot@nvidia.com>,
David Miller <davem@davemloft.net>,
Florian Fainelli <f.fainelli@gmail.com>,
David Daney <david.daney@cavium.com>
Subject: [PATCH][v2] mdio-mux-gpio: Use GPIO descriptor interface and new gpiod_set_array function
Date: Tue, 25 Nov 2014 10:31:18 +0100 [thread overview]
Message-ID: <2814617.OrXEO01vgP@pcimr> (raw)
Convert mdio-mux-gpio to the GPIO descriptor interface and use the new
gpiod_set_array function to set all output signals simultaneously.
Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
Acked-by: David S. Miller <davem@davemloft.net>
--
This patch depends on the gpiod_set_array function, which is available in
the linux-gpio devel tree.
v2: fix gpiod_get_index usage
drivers/net/phy/mdio-mux-gpio.c | 38 ++++++++++++++------------------------
1 file changed, 14 insertions(+), 24 deletions(-)
diff --git a/drivers/net/phy/mdio-mux-gpio.c b/drivers/net/phy/mdio-mux-gpio.c
index 0966951..1167c5b 100644
--- a/drivers/net/phy/mdio-mux-gpio.c
+++ b/drivers/net/phy/mdio-mux-gpio.c
@@ -14,13 +14,13 @@
#include <linux/mdio-mux.h>
#include <linux/of_gpio.h>
-#define DRV_VERSION "1.0"
+#define DRV_VERSION "1.1"
#define DRV_DESCRIPTION "GPIO controlled MDIO bus multiplexer driver"
#define MDIO_MUX_GPIO_MAX_BITS 8
struct mdio_mux_gpio_state {
- int gpio[MDIO_MUX_GPIO_MAX_BITS];
+ struct gpio_desc *gpio[MDIO_MUX_GPIO_MAX_BITS];
unsigned int num_gpios;
void *mux_handle;
};
@@ -28,29 +28,23 @@ struct mdio_mux_gpio_state {
static int mdio_mux_gpio_switch_fn(int current_child, int desired_child,
void *data)
{
- int change;
+ int values[MDIO_MUX_GPIO_MAX_BITS];
unsigned int n;
struct mdio_mux_gpio_state *s = data;
if (current_child == desired_child)
return 0;
- change = current_child == -1 ? -1 : current_child ^ desired_child;
-
for (n = 0; n < s->num_gpios; n++) {
- if (change & 1)
- gpio_set_value_cansleep(s->gpio[n],
- (desired_child & 1) != 0);
- change >>= 1;
- desired_child >>= 1;
+ values[n] = (desired_child >> n) & 1;
}
+ gpiod_set_array_cansleep(s->num_gpios, s->gpio, values);
return 0;
}
static int mdio_mux_gpio_probe(struct platform_device *pdev)
{
- enum of_gpio_flags f;
struct mdio_mux_gpio_state *s;
int num_gpios;
unsigned int n;
@@ -70,22 +64,14 @@ static int mdio_mux_gpio_probe(struct platform_device *pdev)
s->num_gpios = num_gpios;
for (n = 0; n < num_gpios; ) {
- int gpio = of_get_gpio_flags(pdev->dev.of_node, n, &f);
- if (gpio < 0) {
- r = (gpio == -ENODEV) ? -EPROBE_DEFER : gpio;
+ struct gpio_desc *gpio = gpiod_get_index(&pdev->dev, NULL, n,
+ GPIOD_OUT_LOW);
+ if (IS_ERR(gpio)) {
+ r = PTR_ERR(gpio);
goto err;
}
s->gpio[n] = gpio;
-
n++;
-
- r = gpio_request(gpio, "mdio_mux_gpio");
- if (r)
- goto err;
-
- r = gpio_direction_output(gpio, 0);
- if (r)
- goto err;
}
r = mdio_mux_init(&pdev->dev,
@@ -98,15 +84,19 @@ static int mdio_mux_gpio_probe(struct platform_device *pdev)
err:
while (n) {
n--;
- gpio_free(s->gpio[n]);
+ gpiod_put(s->gpio[n]);
}
return r;
}
static int mdio_mux_gpio_remove(struct platform_device *pdev)
{
+ unsigned int n;
struct mdio_mux_gpio_state *s = dev_get_platdata(&pdev->dev);
mdio_mux_uninit(s->mux_handle);
+ for (n = 0; n < s->num_gpios; n++) {
+ gpiod_put(s->gpio[n]);
+ }
return 0;
}
--
2.0.4
next reply other threads:[~2014-11-25 9:31 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-25 9:31 Rojhalat Ibrahim [this message]
2014-11-25 13:44 ` [PATCH][v2] mdio-mux-gpio: Use GPIO descriptor interface and new gpiod_set_array function Sergei Shtylyov
2014-11-28 13:49 ` Linus Walleij
2014-11-28 13:48 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2814617.OrXEO01vgP@pcimr \
--to=imr@rtschenk.de \
--cc=acourbot@nvidia.com \
--cc=davem@davemloft.net \
--cc=david.daney@cavium.com \
--cc=f.fainelli@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.