From: "acrux_it@libero.it" <acrux_it@libero.it>
To: linuxppc-dev@lists.ozlabs.org
Subject: pata_sl82c105 is unable to properly handle dma (indeed it try to use mwdma2)
Date: Wed, 7 Dec 2011 02:15:00 +0100 (CET) [thread overview]
Message-ID: <28546010.491181323220500482.JavaMail.defaultUser@defaultHost> (raw)
New pata_sl82c105 is unable to properly handle dma (indeed it try to use
mwdma2).
Old ide driver instead worked fine.
Tested on IBM 9114-275 where to use it i must boot with dma disabled i.e. with
libata.dma=0
[...]
pata_sl82c105 0000:00:03.1: enabling device (0144 -> 0145)
scsi1 : pata_sl82c105
scsi2 : pata_sl82c105
ata1: PATA max MWDMA2 cmd 0x1f000 ctl 0x1f010 bmdma 0x1f040 irq 165
ata2: PATA max MWDMA2 cmd 0x1f020 ctl 0x1f030 bmdma 0x1f048 irq 165
ata1.00: ATAPI: IBM DROM00205, NR38, max UDMA/33
ata1.00: configured for MWDMA2
[...]
scsi 1:0:0:0: CD-ROM IBM DROM00205 NR38 PQ: 0 ANSI: 2
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi generic sg3 type 5
[...]
ata1: lost interrupt (Status 0x50)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 1:0:0:0: CDB: Get configuration: 46 00 00 00 00 00 00 00 20 00
ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for MWDMA2
ata1: EH complete
sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00
20 00
sr: Sense Key : Aborted Command [current] [descriptor]
sr: Add. Sense: No additional sense information
ata1: lost interrupt (Status 0x50)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 1:0:0:0: CDB: Xdread, Read track info: 52 01 00 00 00 01 00 00 20 00
ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
res 40/00:02:00:08:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for MWDMA2
ata1: EH complete
sr0: CDROM (ioctl) error, command: Xdread, Read track info 52 01 00 00 00 01
00 000
sr: Sense Key : Aborted Command [current] [descriptor]
sr: Add. Sense: No additional sense information
ata1: lost interrupt (Status 0x50)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 1:0:0:0: CDB: Get configuration: 46 00 00 00 00 00 00 00 20 00
ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for MWDMA2
ata1: EH complete
sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00
20 00
sr: Sense Key : Aborted Command [current] [descriptor]
sr: Add. Sense: No additional sense information
ata1: lost interrupt (Status 0x50)
ata1.00: limiting speed to MWDMA1:PIO4
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 1:0:0:0: CDB: Get configuration: 46 00 00 00 00 00 00 00 20 00
ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for MWDMA1
ata1: EH complete
sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00
20 00
sr: Sense Key : Aborted Command [current] [descriptor]
sr: Add. Sense: No additional sense information
ata1: lost interrupt (Status 0x50)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 1:0:0:0: CDB: Get configuration: 46 00 00 00 00 00 00 00 20 00
ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for MWDMA1
ata1: EH complete
sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00
20 00
sr: Sense Key : Aborted Command [current] [descriptor]
sr: Add. Sense: No additional sense information
ata1: lost interrupt (Status 0x50)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 1:0:0:0: CDB: Get configuration: 46 00 00 00 00 00 00 00 20 00
ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for MWDMA1
ata1: EH complete
sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00
20 00
sr: Sense Key : Aborted Command [current] [descriptor]
sr: Add. Sense: No additional sense information
ata1: lost interrupt (Status 0x50)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 1:0:0:0: CDB: Get configuration: 46 00 00 00 00 00 00 00 20 00
ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for MWDMA1
ata1: EH complete
sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00
20 00
sr: Sense Key : Aborted Command [current] [descriptor]
sr: Add. Sense: No additional sense information
ata1: lost interrupt (Status 0x50)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
sr 1:0:0:0: CDB: Get configuration: 46 00 00 00 00 00 00 00 20 00
ata1.00: cmd a0/01:00:00:20:00/00:00:00:00:00/a0 tag 0 dma 16416 in
res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for MWDMA1
ata1: EH complete
cheers,
--nico
next reply other threads:[~2011-12-07 1:15 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-07 1:15 acrux_it [this message]
2011-12-07 2:21 ` pata_sl82c105 is unable to properly handle dma (indeed it try to use mwdma2) Benjamin Herrenschmidt
2011-12-07 2:21 ` Benjamin Herrenschmidt
2011-12-07 19:30 ` acrux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=28546010.491181323220500482.JavaMail.defaultUser@defaultHost \
--to=acrux_it@libero.it \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.