From: qiaowj <qiaowj@netpower.com.cn>
To: u-boot@lists.denx.de
Subject: [U-Boot] mv78100 board whether can support from the usb start?
Date: Mon, 17 May 2010 20:02:52 -0700 (PDT) [thread overview]
Message-ID: <28591067.post@talk.nabble.com> (raw)
I try to start from the usb directly, but mv78100 didn't provide
corresponding driving, I found a marvell high version of the usb driver, put
it to boot1.1.4, but couldn't find a usb storage, I don't know how to do
it, who will give me some advice? Thank you, here is some information to
start:
Marvell>>
(Re)start USB...
USB: scanning bus for devices... New Device 0
usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0
length 0x8
EHCI_DEBUG: ehci_submit_root: req=6 (0x6), type=128 (0x80), value=256,
index=0
set address 1
usb_control_msg: request: 0x5, requesttype: 0x0, value 0x1 index 0x0 length
0x0
EHCI_DEBUG: ehci_submit_root: req=5 (0x5), type=0 (0x0), value=1, index=0
usb_control_msg: request: 0x6, requesttype: 0x80, value 0x100 index 0x0
length 0x12
EHCI_DEBUG: ehci_submit_root: req=6 (0x6), type=128 (0x80), value=256,
index=0
usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0
length 0x9
EHCI_DEBUG: ehci_submit_root: req=6 (0x6), type=128 (0x80), value=512,
index=0
usb_control_msg: request: 0x6, requesttype: 0x80, value 0x200 index 0x0
length 0x19
EHCI_DEBUG: ehci_submit_root: req=6 (0x6), type=128 (0x80), value=512,
index=0
get_conf_no 0 Result 25, wLength 25
if 0, ep 0
##EP epmaxpacketin[1] = 8
set configuration 1
usb_control_msg: request: 0x9, requesttype: 0x0, value 0x1 index 0x0 length
0x0
EHCI_DEBUG: ehci_submit_root: req=9 (0x9), type=0 (0x0), value=1, index=0
new device strings: Mfr=1, Product=2, SerialNumber=0
usb_control_msg: request: 0x6, requesttype: 0x80, value 0x300 index 0x0
length 0xFF
EHCI_DEBUG: ehci_submit_root: req=6 (0x6), type=128 (0x80), value=768,
index=0
USB device number 1 default language ID 0x1
usb_control_msg: request: 0x6, requesttype: 0x80, value 0x301 index 0x1
length 0xFF
EHCI_DEBUG: ehci_submit_root: req=6 (0x6), type=128 (0x80), value=769,
index=1
usb_control_msg: request: 0x6, requesttype: 0x80, value 0x302 index 0x1
length 0xFF
EHCI_DEBUG: ehci_submit_root: req=6 (0x6), type=128 (0x80), value=770,
index=1
Manufacturer Marvell
Product EHCI
SerialNumber
usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0
length 0x4
EHCI_DEBUG: ehci_submit_root: req=6 (0x6), type=160 (0xa0), value=10496,
index=0
usb_control_msg: request: 0x6, requesttype: 0xA0, value 0x2900 index 0x0
length 0x8
EHCI_DEBUG: ehci_submit_root: req=6 (0x6), type=160 (0xa0), value=10496,
index=0
usb_control_msg: request: 0x0, requesttype: 0xA0, value 0x0 index 0x0 length
0x4
EHCI_DEBUG: ehci_submit_root: req=0 (0x0), type=160 (0xa0), value=0, index=0
usb_control_msg: request: 0x3, requesttype: 0x23, value 0x8 index 0x1 length
0x0
EHCI_DEBUG: ehci_submit_root: req=3 (0x3), type=35 (0x23), value=8, index=1
usb_control_msg: request: 0x0, requesttype: 0xA3, value 0x0 index 0x1 length
0x4
EHCI_DEBUG: ehci_submit_root: req=0 (0x0), type=163 (0xa3), value=0, index=1
1 USB Device(s) found
scanning bus for storage devices... i=0
netpower: usb probe fail, bDeviceClass:9, bInterfaceClass:9,
bInterfaceSubClass:0, bInterfaceSubClass:0
i=1 //this is my print message
0 Storage Device(s) found
Marvell>> usb info
1: Hub, USB Revision 2.0
- Marvell EHCI
- Class: Hub
- PacketSize: 64 Configurations: 1
- Vendor: 0x0000 Product 0x0000 Version 1.0
Configuration: 1
- Interfaces: 1 Self Powered 0mA
Interface: 0
- Alternate Setting 0, Endpoints: 1
- Class Hub
- Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms
why bInterfaceClass=9? http://old.nabble.com/file/p28591067/usb_ehci.c
usb_ehci.c http://old.nabble.com/file/p28591067/usb_ehci.h usb_ehci.h
--
View this message in context: http://old.nabble.com/mv78100-board-whether-can-support-from-the-usb-start--tp28591067p28591067.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
reply other threads:[~2010-05-18 3:02 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=28591067.post@talk.nabble.com \
--to=qiaowj@netpower.com.cn \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.