From: Andrii Anisov <andrii.anisov@gmail.com>
To: "LOPEZ, FUENTES NACARINO Jairo Eduardo" <jairo@ruri.waseda.jp>,
xen-devel@lists.xen.org
Subject: Re: RT Xen on ARM - R-Car series
Date: Mon, 28 Jan 2019 10:25:30 +0200 [thread overview]
Message-ID: <28e6dfab-6a3f-7bea-eca9-2d812903d9f7@gmail.com> (raw)
In-Reply-To: <CACrvCsYb0ANJASKYxeA0V2yg0aqKM0OaKCB=_i1zX9DPLwrNrQ@mail.gmail.com>
Hello Jairo,
On 28.01.19 19:20, LOPEZ, FUENTES NACARINO Jairo Eduardo wrote:
> I was able to compile the Xen image with earlyprintk without issue.
Cool.
> It is comforting to get some sort of feedback from the device, even if it is failing.
Indeed:)
> When attempting to boot the Xen image created I did get print messages but I get the following:
...
I see you have freshly built BL2:
> [ 0.120591] NOTICE: BL2: v1.4(release):15dba6b
> [ 0.125081] NOTICE: BL2: Built : 11:34:26, Jan 21 2019
...
> - UART enabled -
> - CPU 00000000 booting -
> - Current EL 00000004 -
> - Xen must be entered in NS EL2 mode -
But something went wrong, and your BL2 did not start u-boot in EL2. Consequently, hypervisor is not started in EL2 and can not do its work.
Please verify you have your ATF built with ` RCAR_BL33_EXECUTION_EL=BL33_EL2` as it is stated in the correspondent recipe [1].
You can search for it in <yocto dir>/build/tmp/work/<board name>-poky-linux/v1.4+renesas+<revision>/tmp/* .
And if it is compiled with the flag, then take care to reflash all bootloader images on your board.
[1] https://github.com/xen-troops/meta-demo/blob/master/meta-rcar-gen3-xen/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bbappend
--
Sincerely,
Andrii Anisov.
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xenproject.org
https://lists.xenproject.org/mailman/listinfo/xen-devel
next prev parent reply other threads:[~2019-01-28 8:25 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CACrvCsaeHuwzZzUQTzNYF7fqmgQWNJUVOQZv9D0MnYrXjqzZtQ@mail.gmail.com>
2018-12-22 12:21 ` RT Xen on ARM - R-Car series Andrii Anisov
2018-12-25 16:07 ` LOPEZ, FUENTES NACARINO Jairo Eduardo
2018-12-27 11:07 ` Andrii Anisov
2018-12-28 15:22 ` LOPEZ, FUENTES NACARINO Jairo Eduardo
2018-12-28 8:28 ` Andrii Anisov
2018-12-28 8:32 ` Andrii Anisov
2018-12-28 8:39 ` Andrii Anisov
2019-01-04 9:09 ` LOPEZ, FUENTES NACARINO Jairo Eduardo
2019-01-08 17:04 ` LOPEZ, FUENTES NACARINO Jairo Eduardo
2019-01-11 20:12 ` LOPEZ, FUENTES NACARINO Jairo Eduardo
2019-01-14 8:42 ` Andrii Anisov
2019-01-16 7:53 ` Andrii Anisov
2019-01-21 18:04 ` LOPEZ, FUENTES NACARINO Jairo Eduardo
[not found] ` <CACrvCsZB-tps6=Vr=1Phf5oo5eUReabMLJzkbO3d2hmNLDOxww@mail.gmail.com>
[not found] ` <7e217489-2c1a-c35f-d51f-0969654aa8cc@gmail.com>
[not found] ` <CACrvCsaYJ-zGkZwfdV7BXDABW8u_EDQetU3pq+2otRGXWTXagw@mail.gmail.com>
[not found] ` <4d078801-b804-06e7-ad5c-8032b1dbaa84@gmail.com>
2019-01-28 17:20 ` LOPEZ, FUENTES NACARINO Jairo Eduardo
2019-01-28 8:25 ` Andrii Anisov [this message]
2019-01-29 15:30 ` LOPEZ, FUENTES NACARINO Jairo Eduardo
2019-01-29 13:29 ` Andrii Anisov
2019-01-30 20:23 ` LOPEZ, FUENTES NACARINO Jairo Eduardo
2019-01-30 12:12 ` Julien Grall
2019-01-31 11:22 ` Andrii Anisov
2019-01-31 11:37 ` Julien Grall
2019-01-31 12:00 ` Andrii Anisov
2019-01-31 12:20 ` Julien Grall
2019-01-31 21:56 ` Stefano Stabellini
2019-01-31 23:14 ` Julien Grall
2019-02-01 10:02 ` Andrii Anisov
2019-02-01 10:12 ` Julien Grall
2019-02-01 10:35 ` Andrii Anisov
2019-02-01 11:06 ` Julien Grall
2019-02-01 16:53 ` Roger Pau Monné
2019-02-01 17:40 ` Julien Grall
2019-02-04 10:28 ` Andrii Anisov
2019-02-04 11:21 ` Julien Grall
2019-02-04 14:46 ` Andrii Anisov
2019-02-04 15:05 ` Julien Grall
2019-02-04 12:53 ` Roger Pau Monné
2019-02-04 21:58 ` Julien Grall
2019-02-05 8:40 ` Andrii Anisov
2019-02-05 9:45 ` Roger Pau Monné
2019-02-05 9:54 ` Andrii Anisov
2019-02-05 10:10 ` Roger Pau Monné
2019-02-06 20:20 ` Andrii Anisov
2019-02-06 21:03 ` Stefano Stabellini
2019-02-07 9:42 ` Andrii Anisov
2019-02-07 10:35 ` Roger Pau Monné
2019-02-07 10:59 ` Julien Grall
2019-02-12 18:21 ` Andrii Anisov
2019-02-12 19:21 ` Julien Grall
2019-02-14 14:18 ` Andrii Anisov
2019-02-14 17:29 ` Julien Grall
2019-02-15 11:30 ` Andrii Anisov
2019-02-15 17:13 ` Julien Grall
2019-02-15 17:41 ` Andrii Anisov
2019-02-16 8:42 ` Julien Grall
2019-02-12 18:21 ` Andrii Anisov
2019-02-14 16:29 ` Roger Pau Monné
2019-02-15 15:21 ` Andrii Anisov
2019-02-15 16:31 ` Julien Grall
2019-02-15 17:30 ` Andrii Anisov
2019-02-15 18:36 ` Julien Grall
2019-02-14 17:08 ` Julien Grall
2019-02-05 9:26 ` Roger Pau Monné
2019-02-01 10:07 ` Andrii Anisov
2019-02-01 10:16 ` Julien Grall
2019-02-01 10:35 ` Andrii Anisov
2019-02-01 10:51 ` Julien Grall
2019-02-01 18:00 ` Stefano Stabellini
2019-02-04 10:32 ` Andrii Anisov
2019-02-04 11:36 ` Julien Grall
2019-02-04 15:19 ` Andrii Anisov
2019-02-04 22:06 ` Julien Grall
2019-02-05 9:01 ` Andrii Anisov
2019-02-05 19:18 ` Stefano Stabellini
2019-02-07 10:53 ` Andrii Anisov
[not found] ` <CACrvCsbkFG=3To83qi7xxmtmgC_9PKvuLz73edhiaV7TsJAZqQ@mail.gmail.com>
2019-01-31 12:24 ` Julien Grall
2019-01-16 20:46 ` Andrii Anisov
2019-01-16 7:40 ` Andrii Anisov
2019-01-17 2:08 ` LOPEZ, FUENTES NACARINO Jairo Eduardo
2018-12-28 17:35 ` LOPEZ, FUENTES NACARINO Jairo Eduardo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=28e6dfab-6a3f-7bea-eca9-2d812903d9f7@gmail.com \
--to=andrii.anisov@gmail.com \
--cc=jairo@ruri.waseda.jp \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.