From: mateer <bhat.mateen@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] fw_printenv is not working
Date: Thu, 29 Jul 2010 08:22:50 -0700 (PDT) [thread overview]
Message-ID: <29297564.post@talk.nabble.com> (raw)
Hi,
when i run fw_printenv , its not working..It shows:- fw_printenv: line 1:
syntax error: "(" unexpected error... Let me tell you what i did...
1) i copy the u-boot source code from my colleague and copy in my hard disk.
2) After then i set the environment through commnads. the commands which i
run are
# make CROSS_COMPILE=arm-none-linux-gnueabi- ARCH=arm distclean
# make CROSS_COMPILE=arm-none-linux-gnueabi- ARCH=arm omap3_evm_config
# make CROSS_COMPILE=arm-none-linux-gnueabi- ARCH=arm
3) After then i go to /tools/env, where i configure the fw_env.config and
then run make command.
4) After ruuning the command i got crc32.c and fw_printenv.
5)i copied the fw_printenv into the SD-Card and insert the card into the
OMAP3EVM board.
6) after then when i use the command ./fw_printenv it throws the error
fw_printenv: line 1: syntax error: "(" unexpected error..
Can u please help me what i have to do... I think i am doing
something wrong...
--
View this message in context: http://old.nabble.com/fw_printenv-is-not-working-tp29297564p29297564.html
Sent from the Uboot - Users mailing list archive at Nabble.com.
next reply other threads:[~2010-07-29 15:22 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-29 15:22 mateer [this message]
-- strict thread matches above, loose matches on Subject: below --
2010-07-29 15:21 [U-Boot] fw_printenv is not working mateer
2010-07-29 15:24 ` Mike Frysinger
2012-10-22 4:13 ` Nih_a
2012-10-22 13:19 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=29297564.post@talk.nabble.com \
--to=bhat.mateen@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.