Re: udmabuf vmap failed (Revert "udmabuf: fix vmap_udmabuf error page set" can help)

[Bingbu Cao <bingbu.cao@linux.intel.com>]

Christoph and Ryan,

Could you help check this? Thanks.

On 3/11/25 4:54 PM, Huan Yang wrote:
> 
> 在 2025/3/11 16:42, Bingbu Cao 写道:
>> [You don't often get email from bingbu.cao@linux.intel.com. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>>
>> Huan,
>>
>> Thanks for your response.
>>
>> On 3/11/25 3:12 PM, Huan Yang wrote:
>>> 在 2025/3/11 14:40, Bingbu Cao 写道:
>>>> [You don't often get email from bingbu.cao@linux.intel.com. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>>>>
>>>> Huan Yang and Vivek,
>>>>
>>>> I am trying to use udmabuf for my test, and I cannot vmap the udmabuf
>>>> buffers now. vmap_pfn_apply() will report a warning to complain that
>>>> the pfns are invalid.
>>>> I dump the pfn numbers as below:
>>>> [ 3365.399641] pg[0] pfn 1148695
>>>> [ 3365.399642] pg[1] pfn 1145057
>>>> [ 3365.399642] pg[2] pfn 1134070
>>>> [ 3365.399643] pg[3] pfn 1148700
>>>> [ 3365.399643] pg[4] pfn 1144871
>>>> [ 3365.399643] pg[5] pfn 1408686
>>>> [ 3365.399643] pg[6] pfn 1408683
>>>> ...
>>>> [ 3365.399660] WARNING: CPU: 3 PID: 2772 at mm/vmalloc.c:3489 vmap_pfn_apply+0xb7/0xd0
>>>> [ 3365.399667] Modules linked in:...
>>>> [ 3365.399750] CPU: 3 UID: 0 PID: 2772 Comm: drm-test Not tainted 6.13.0-rc2-rvp #845
>>>> [ 3365.399752] Hardware name: Intel Corporation Client Platform/xxxx, BIOS xxxFWI1.R00.3221.D83.2408120121 08/12/2024
>>>> [ 3365.399753] RIP: 0010:vmap_pfn_apply+0xb7/0xd0
>>>> [ 3365.399755] Code: 5b 41 5c 41 5d 5d c3 cc cc cc cc 48 21 c3 eb d1 48 21 c3 48 23 3d 31 c0 26 02 eb c5 48 c7 c7 c4 3c 20 a8 e8 5b c0 d8 ff eb 8a <0f> 0b b8 ea ff ff ff 5b 41 5c 41 5d 5d c3 cc cc cc cc 0f 1f 80 00
>>>> [ 3365.399756] RSP: 0018:ffffb9b50c32fad0 EFLAGS: 00010202
>>>> [ 3365.399757] RAX: 0000000000000001 RBX: 0000000000118717 RCX: 0000000000000000
>>>> [ 3365.399758] RDX: 0000000080000000 RSI: ffffb9b50c358000 RDI: 00000000ffffffff
>>>> [ 3365.399758] RBP: ffffb9b50c32fae8 R08: ffffb9b50c32fbd0 R09: 0000000000000001
>>>> [ 3365.399759] R10: ffff941602479288 R11: 0000000000000000 R12: ffffb9b50c32fbd0
>>>> [ 3365.399759] R13: ffff941618665ac0 R14: ffffb9b50c358000 R15: ffff941618665ac8
>>>> [ 3365.399760] FS:  00007ff9e9ddd740(0000) GS:ffff94196f780000(0000) knlGS:0000000000000000
>>>> [ 3365.399760] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>>> [ 3365.399761] CR2: 000055fda5dc69d9 CR3: 00000001544de003 CR4: 0000000000f72ef0
>>>> [ 3365.399762] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
>>>> [ 3365.399762] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
>>>> [ 3365.399763] PKRU: 55555554
>>>> [ 3365.399763] Call Trace:
>>>> [ 3365.399765]  <TASK>
>>>> [ 3365.399769]  ? show_regs+0x6d/0x80
>>>> [ 3365.399773]  ? __warn+0x97/0x160
>>>> [ 3365.399777]  ? vmap_pfn_apply+0xb7/0xd0
>>>> [ 3365.399777]  ? report_bug+0x1ec/0x240
>>>> [ 3365.399782]  ? handle_bug+0x63/0xa0
>>>> [ 3365.399784]  ? exc_invalid_op+0x1d/0x80
>>>> [ 3365.399785]  ? asm_exc_invalid_op+0x1f/0x30
>>>> [ 3365.399790]  ? vmap_pfn_apply+0xb7/0xd0
>>>> [ 3365.399791]  __apply_to_page_range+0x522/0x8a0
>>>> [ 3365.399794]  ? __pfx_vmap_pfn_apply+0x10/0x10
>>>> [ 3365.399795]  apply_to_page_range+0x18/0x20
>>>> [ 3365.399796]  vmap_pfn+0x77/0xd0
>>>> [ 3365.399797]  vmap_udmabuf+0xc5/0x110
>>>> [ 3365.399802]  dma_buf_vmap+0x96/0x130
>>>>
>>>> I did an experiment to revert 18d7de823b7150344d242c3677e65d68c5271b04,
>>>> then I can vmap the pages. Could you help what's wrong with that?
>>> Sorry for that, as I reviewed pfn_valid, that's someting wired:
>>>
>>> /**
>>>   * pfn_valid - check if there is a valid memory map entry for a PFN
>>>   * @pfn: the page frame number to check
>>>   *
>>>   * Check if there is a valid memory map entry aka struct page for the @pfn.
>>>   * Note, that availability of the memory map entry does not imply that
>>>   * there is actual usable memory at that @pfn. The struct page may
>>>   * represent a hole or an unusable page frame.
>>>   *
>>>   * Return: 1 for PFNs that have memory map entries and 0 otherwise
>>>   */
>>>
>>> So, if pfn valid, it's return 1, else 0. So mean, only 1 is a valid pfn. But vmap_pfn_apply in there:
>>>
>>> static int vmap_pfn_apply(pte_t *pte, unsigned long addr, void *private)
>>> {
>>>      struct vmap_pfn_data *data = private;
>>>      unsigned long pfn = data->pfns[data->idx];
>>>      pte_t ptent;
>>>
>>>      if (WARN_ON_ONCE(pfn_valid(pfn)))
>>>          return -EINVAL;
>>>
>>>      ptent = pte_mkspecial(pfn_pte(pfn, data->prot));
>>>      set_pte_at(&init_mm, addr, pte, ptent);
>>>
>>>      data->idx++;
>>>      return 0;
>>> }
>>>
>>> Do it give a wrong check? maybe should fix by:
>> I guess not, it looks more like warning when you trying to vmap a
>> pfn which already took a valid entry in pte.
> 
> No, I think here check need pfn is valid, then can set it. If a pfn is invalid, why we set it in PTE?
> 
> Also, I can't make sure.
> 
> BTW, can you fix it then retest?
> 
> Thank you.
> 
>>
>> However, the MM code is so complex for me, just my guess. :)
>>
>>> static int vmap_pfn_apply(pte_t *pte, unsigned long addr, void *private)
>>> {
>>>      struct vmap_pfn_data *data = private;
>>>      unsigned long pfn = data->pfns[data->idx];
>>>      pte_t ptent;
>>>
>>> -    if (WARN_ON_ONCE(pfn_valid(pfn)))
>>> +    if (WARN_ON_ONCE(!pfn_valid(pfn)))
>>>          return -EINVAL;
>>>
>>>      ptent = pte_mkspecial(pfn_pte(pfn, data->prot));
>>>      set_pte_at(&init_mm, addr, pte, ptent);
>>>
>>>      data->idx++;
>>>      return 0;
>>> }
>>>
>>> Please help me check it, also, you can apply this and then check it.:)
>>>
>>>>
>>>> -- 
>>>> Best regards,
>>>> Bingbu Cao
>> -- 
>> Best regards,
>> Bingbu Cao

-- 
Best regards,
Bingbu Cao