From: 齐尧 <qiyao@bit.edu.cn>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] I can not drive the cs8900 on mx1ads by u-boot-1.1.1-imx1
Date: Tue, 21 Sep 2004 13:43:21 +0800 [thread overview]
Message-ID: <295745084.04983@eyou.net> (raw)
hi,
I am sorry to send unreadable mail so many times.I want to try again.
Now ,the u-boot can work well ,but the i can not controlethcad cs8900 very well.i can not read the id of cs8900.I have ported the blob to mx1ads ,and i can get the id of cs8900 .now ,i just copy the code in blob to u-boot to get the id of cs8900 ,but i am failed .I do not know why .
the code related to is as follows :
//set CS4U
*(volatile unsigned long*)(0x00220020) = 0x00000F00;
//set CS4L control register
*(volatile unsigned long*)(0x00220024) = 0x80001501;
//set the GPIO muxing to use Chip Select 4
*(volatile unsigned long*)(0x0021C020) &= 0xFF3FFFFF;
*(volatile unsigned long*)(0x0021C038) &= 0xFF3FFFFF;
//the irq is connect to GPIO pin to PortC pin 17
*((volatile unsigned long* ) 0x0021c220)&=~0x00020000;
*((volatile unsigned long*) 0x0021c238)&=~0x00020000;
//send the base address of cs8900 on the ADD Bus
c = *(volatile unsigned char *)(0x15000300);
CS8900_PPTR = regno;
printf("CS8900_PDATA = %x\n",CS8900_PDATA);
the result is always 0x5555,i do not know why,these codes above can work well in blob.
I am looking forward your reply,thank ahead!
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ??.vcf
Type: text/x-vcard
Size: 108 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20040921/acb23444/attachment.vcf
reply other threads:[~2004-09-21 5:43 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=295745084.04983@eyou.net \
--to=qiyao@bit.edu.cn \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.