From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Mon, 18 Mar 2019 08:08:14 -0500 (CDT) From: Per Oberg Message-ID: <296024002.357572.1552914494416.JavaMail.zimbra@wolfram.com> Subject: [e1000e porting] Unable to send one frame? MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable List-Id: Discussions about the Xenomai project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: xenomai On Mon Nov 5 03:43:49 CET 2018 limingyu wrote: > Hello, >=20 > I=E2=80=98m recently work with Xenomai and RTnet, >=20 > and I found that rt_e1000e driver didn't goes >=20 > well with the my computer(As my computer >=20 > uses I219-V2 Ethernet adapter), so I just try to >=20 > work it out. >=20 > I use the linux-4.9.51 as my kernel, and ported the >=20 > intel e1000e driver to the RTnet now. And I have >=20 > already make it able to send the SYNC frame of >=20 > TDMA and Stage 1 Config frame of RTcfg now in >=20 > the QEMU emulator. But I just found that it's unable >=20 > to send the Calibration frame back to master from >=20 > slave side as it's just ONE frame. I can send large >=20 > number of frame like SYNC and stage 1 frame but >=20 > can't send just one frame! >=20 > Does anybody have any idea of this situation? >=20 > --=20 > =E5=8C=97=E4=BA=AC=E5=87=9D=E6=80=9D=E8=BD=AF=E4=BB=B6=E8=82=A1=E4=BB=BD= =E6=9C=89=E9=99=90=E5=85=AC=E5=8F=B8=E5=9B=9B=E5=B7=9D=E5=88=86=E5=85=AC=E5= =8F=B8 > =E8=81=94=E7=B3=BB=E4=BA=BA=EF=BC=9A=E6=9D=8E=E6=98=8E=E5=AE=87 > =E8=81=94=E7=B3=BB=E7=94=B5=E8=AF=9D=EF=BC=9A028-65182023-6202 > E-mail: myli at linx-info.com > =E5=85=AC=E5=8F=B8=E5=9C=B0=E5=9D=80=EF=BC=9A=E6=88=90=E9=83=BD=E5=B8=82= =E6=AD=A6=E4=BE=AF=E5=8C=BA=E5=A4=A9=E5=BA=9C=E5=A4=A7=E9=81=93=E4=B8=AD=E6= =AE=B5530=E4=B8=9C=E6=96=B9=E5=B8=8C=E6=9C=9B=E5=A4=A9=E7=A5=A5=E5=B9=BF=E5= =9C=BA1=E5=8F=B7=E6=A5=BC3402 limingyu Did you ever get this working ?=20 I'm interested in support for I219 too. Regards Per =C3=96berg