[U-Boot] u-boot 2010 - devkit8000 issue

[el.einad <el.einad@gmail.com>]

I have a similar issue: I have a beagleboard rev C4 and I'm trying to use a
custom kernel instead of Angstrom. I downloaded the last u-boot using git
from git://gitorious.org/beagleboard-validation/u-boot.git
I compiled this u-boot and then I compiled the MontaVista kernel
(http://www.beagleboard.org/~arago/esc-boston-2009/mvista/beaglekernel24.v1.tar.bz2).
Thus I obtained a uImage.
I copied MLO, u-boot.bin and uImage into a SD card and tryed to boot from
this:

...
OMAP3 beagleboard.org # mmc init
mmc1 is available
OMAP3 beagleboard.org # fatload mmc 0:1 0x82000000 uimage
reading uimage

1568464 bytes read
OMAP3 beagleboard.org # bootm 0x82000000
## Booting kernel from Legacy Image at 82000000 ...
   Image Name:   Linux-2.6.24_mvl5024-beagle_ESC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1568400 Bytes =  1.5 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
   Loading Kernel Image ... 

----HANGS HERE----

Please help me, I'm trying everything but nothing works....




Thomas Weber-16 wrote:
> 
> Hello,
> 
> the u-boot and the linux-kernel from the TimLL cd are patched with an
> unofficial machine identifier. They are not working with any other of
> your sources. You need to update both, u-boot and linux-kernel.  Can
> you write me, which u-boot and linux-kernel version you are using?
> 
> Thomas
> 
> On Sat, Jun 12, 2010 at 7:30 PM, JaimeR <jaime.rebolledo@gmail.com> wrote:
>>
>> Hello
>>
>> I have a clone of beagleboard (devkit8000) I update the u-boot from
>> 2009-11
>> to 2010 version. I use a set of scripts to boot based on autoboot method.
>> The thing is, now I can not boot and hangs at kernel loading. I've tested
>> several kernels provided by manufacturer, linux-omap-2.6, some other from
>> git:/gitorious/devkit8000 and all of them end like:
>>
>> ## Booting kernel from Legacy Image at 82000000 ...
>> ...
>> ? Verifying Checksum ... OK
>> ? Loading Kernel Image ... OK
>> OK
>>
>> Starting kernel ...
>>
>> hangs here
>>
>> and some others
>>
>> ? Verifying Checksum ... OK
>> ? Loading Kernel Image ...
>>
>> hangs here.
>>
>> these are my u-boot environment variables. Some of you can give a clue ?
>> I
>> ve tested almost everything.
>>
>> bootdelay=3
>> baudrate=115200
>> loadaddr=0x82000000
>> console=ttyS2,115200n8
>> vram=12M
>> dvimode=1024x768MR-16 at 60
>> defaultdisplay=dvi
>> nfsopts=hard,tcp,rsize=65536,wsize=65536
>> commonargs=setenv bootargs console=${console} vram=${vram}
>> omapfb.mode=dvi:${dvimode} omapdss.def_disp=${defaultdisplay}
>> mmcargs=run commonargs; setenv bootargs ${bootargs} root=/dev/mmcblk0p2
>> ${kernelopts}
>> nandargs=run commonargs; setenv bootargs ${bootargs}
>> omapfb.mode=dvi:${dvimode} omapdss.def_disp=${defaultdisplay}
>> root=/dev/mtdblock4 rootfstype=jffs2 ${kernel}
>> netargs=run commonargs; setenv bootargs ${bootargs} root=/dev/nfs
>> nfsroot=${serverip}:${rootpath},${nfsopts}
>> ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${}
>> loadbootscript=fatload mmc 0 ${loadaddr} boot.scr
>> bootscript=echo Running bootscript from mmc ...; source ${loadaddr}
>> loaduimage=fatload mmc 0 ${loadaddr} uImage
>> eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000
>> mmcboot=echo Booting from mmc ...; run mmcargs; bootm ${loadaddr}
>> nandboot=echo Booting from nand ...; run nandargs; nand read ${loadaddr}
>> 280000 400000; bootm ${loadaddr}
>> netboot=echo Booting from network ...; dhcp ${loadaddr}; run netargs;
>> bootm
>> ${loadaddr}
>> autoboot=if mmc init 0; then if run loadbootscript; then run bootscript;
>> else if run loaduimage; then run mmcboot; else run nandboot; fi; fi; else
>> run nandboot;i
>> ethaddr=02:fa:19:01:f0:1e
>> dieid#=6db2000400000000040365fa1901f01e
>> ethact=dm9000
>> bootargs=console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rw
>> rootwait
>> bootargs_back=console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rw
>> rootwait
>> bootcmd=mmc init;fatload mmc1 0 0x82000000 uImage.bin;bootm 0x82000000
>> stdin=serial
>> stdout=serial
>> stderr=serial
>> kernelopts=rw
>> --
>> View this message in context:
>> http://old.nabble.com/u-boot-2010---devkit8000-issue-tp28866288p28866288.html
>> Sent from the Uboot - Users mailing list archive at Nabble.com.
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 
> 

-- 
View this message in context: http://old.nabble.com/u-boot-2010---devkit8000-issue-tp28866288p29642184.html
Sent from the Uboot - Users mailing list archive at Nabble.com.