From: "marco_cantu_ranzani@libero.it" <marco_cantu_ranzani@libero.it>
To: <linux-mtd@lists.infradead.org>
Subject: Error on sync / reboot
Date: Mon, 17 Oct 2011 17:17:10 +0200 (CEST) [thread overview]
Message-ID: <29722548.1110771318864630977.JavaMail.defaultUser@defaultHost> (raw)
UBI error: ubi_io_write: error -5 while writing 512 bytes to PEB 559:512,
written 0 bytes
UBI warning: ubi_eba_write_leb: failed to write VID header to LEB 0:5, PEB 559
UBI: run torture test for PEB 559
UBI: try another PEB
UBI error: ubi_io_write: error -5 while writing 512 bytes to PEB 560:512,
written 0 bytes
UBI error: do_sync_erase: cannot erase PEB 559, error -5
UBI warning: ubi_eba_write_leb: failed to write VID header to LEB 0:5, PEB 560
UBI error: erase_worker: failed to erase PEB 559, error -5
UBI: try another PEB
UBI: mark PEB 559 as bad
nand_bbt: Error while writing bad block table -5
UBI error: ubi_io_write: error -5 while writing 512 bytes to PEB 561:512,
written 0 bytes
UBI error: ubi_io_mark_bad: cannot mark PEB 559 bad, error -5
UBI warning: ubi_eba_write_leb: failed to write VID header to LEB 0:5, PEB 561
UBI warning: ubi_ro_mode: switch to read-only mode
UBI: try another PEB
UBI error: ubi_io_write: read-only mode
UBI error: do_work: work failed with error code -5
UBI warning: ubi_eba_write_leb: failed to write VID header to LEB 0:5, PEB 562
UBI error: ubi_thread: ubi_bgt0d: work failed with error code -5
UBIFS error (pid 533): ubifs_leb_write: writing 2048 bytes to LEB 5:0 failed,
error -30
UBIFS warning (pid 533): ubifs_ro_mode: switched to read-only mode, error -30
Backtrace:
[<c00304d0>] (dump_backtrace+0x0/0x10c) from [<c03aea9c>]
(dump_stack+0x18/0x1c)
r7:00000005 r6:00000000 r5:c3817000 r4:ffffffe2
[<c03aea84>] (dump_stack+0x0/0x1c) from [<c01668ac>] (ubifs_ro_mode+0x68/0x74)
[<c0166844>] (ubifs_ro_mode+0x0/0x74) from [<c0166de8>]
(ubifs_leb_write+0x94/0xa0)
[<c0166d54>] (ubifs_leb_write+0x0/0xa0) from [<c016ead4>]
(ubifs_log_start_commit+0x25c/0x414)
r7:c3817000 r6:000001c8 r5:00000000 r4:00000800
[<c016e878>] (ubifs_log_start_commit+0x0/0x414) from [<c016f3f4>]
(do_commit+0x1e4/0x7c8)
[<c016f210>] (do_commit+0x0/0x7c8) from [<c016faa0>]
(ubifs_run_commit+0xc8/0x158)
[<c016f9d8>] (ubifs_run_commit+0x0/0x158) from [<c0162018>]
(ubifs_sync_fs+0x88/0xa0)
r7:00000003 r6:000001c8 r5:c3a4b158 r4:00000000
[<c0161f90>] (ubifs_sync_fs+0x0/0xa0) from [<c00cef54>]
(__sync_filesystem+0x4c/0x64)
r9:c3afa000 r8:00000000 r7:c04c0084 r6:c3972e40 r5:00000001
r4:c3972e00
[<c00cef08>] (__sync_filesystem+0x0/0x64) from [<c00cf074>]
(sync_filesystems+0x108/0x154)
r5:c3afa000 r4:c3972e00
[<c00cef6c>] (sync_filesystems+0x0/0x154) from [<c00cf11c>]
(sys_sync+0x24/0x48)
[<c00cf0f8>] (sys_sync+0x0/0x48) from [<c002bfa0>] (ret_fast_syscall+0x0/0x28)
UBIFS error (pid 533): do_commit: commit failed, error -30
ubUBIFS error (pid 523): ubifs_read_node: bad node type (0 but expected 1)
UBIFS error (pid 523): ubifs_read_node: bad node at LEB 20:87232, LEB mapping
status 1
UBIFS error (pid 523): do_readpage: cannot read page 75 of inode 100, error
-22
UBIFS error (pid 523): ubifs_read_node: bad node type (0 but expected 1)
UBIFS error (pid 523): ubifs_read_node: bad node at LEB 20:87232, LEB mapping
status 1
UBIFS error (pid 523): do_readpage: cannot read page 75 of inode 100, error
-22
*****************************************
Kernel 2.6.32
Architecture mini2440
!!! compiled without CONFIG_NAND_VERIFY_WRITE
next reply other threads:[~2011-10-17 15:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-17 15:17 marco_cantu_ranzani [this message]
2011-10-20 16:00 ` Error on sync / reboot Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=29722548.1110771318864630977.JavaMail.defaultUser@defaultHost \
--to=marco_cantu_ranzani@libero.it \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.