All of lore.kernel.org
 help / color / mirror / Atom feed
From: Adrian Hunter <adrian.hunter@intel.com>
To: Pawel Zalewski <pzalewski@thegoodpenguin.co.uk>,
	Ulf Hansson <ulfh@kernel.org>, Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	Broadcom internal kernel review list
	<bcm-kernel-feedback-list@broadcom.com>,
	Hu Ziji <huziji@marvell.com>
Cc: <linux-mmc@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH] mmc: sdhci: Use named initializers for acpi_device_id
Date: Fri, 6 Nov 2026 19:36:24 +0200	[thread overview]
Message-ID: <2ba59618-e537-4593-a840-744b2f26eb4b@intel.com> (raw)
In-Reply-To: <20261106-acpi-mmc-v1-1-00934babd69e@thegoodpenguin.co.uk>

On 06/11/2026 17:55, Pawel Zalewski wrote:
> Use a designated initializer for the acpi_device_id fields which makes the
> code more readable and consistent with how lists are initialized in the
> rest of the kernel code base.

Why is there a different explanation above the "---" than below "---" ?

> 
> Unify the list terminator to have a single space between the brackets and
> no trailing comma.

Why?

> 
> Signed-off-by: Pawel Zalewski <pzalewski@thegoodpenguin.co.uk>
> ---
> This series is converting lists that contain the acpi_device_id struct,
> which is defined in the include/linux/device-id/acpi.h to make use of named
> initializers (which they do not use currently). This work is part of the on
> going effort in the kernel associated with device-ids [1]
> 
> The plan is to convert acpi_device_id::driver_data to have an anonymous
> union, similarly to what was introduced for PCI and I2C device ID tables.
> The goal is to increase type-safety (most of the existing casts are gone),
> to improve readability and to make use intent a bit more clear:
> 
> ```
> union {
> 	kernel_ulong_t driver_data;
> 	const void *driver_data_ptr;
> }
> ```
> 
> But for that to work all lists containing the structs need to use named
> initializers first to avoid triggering -Wmissing-braces. I already have
> patches that implement this and touching a lot of kernel subsystmes that
> use the acpi_device_id struct and that list keeps on growing. Therefore,
> I have decided to split the series per every subsystem into:
> - pre-clean-ups that convert the lists to use named initializers
>   (which is this series)
> - actual implementations that make some of the modules use the new
>   driver_data_ptr member
> 
> That way the task can be fragmented into manageable and independent chunks
> of work and makes this effort easier to review.
> 
> [1] https://lore.kernel.org/all/cover.1780048925.git.u.kleine-koenig@baylibre.com/
> ---
>  drivers/mmc/host/sdhci-acpi.c       | 30 +++++++++++++++---------------
>  drivers/mmc/host/sdhci-iproc.c      |  2 +-
>  drivers/mmc/host/sdhci-of-dwcmshc.c |  2 +-
>  drivers/mmc/host/sdhci-xenon.c      |  8 ++++----
>  drivers/mmc/host/sdhci_f_sdh30.c    |  4 ++--
>  5 files changed, 23 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
> index 84c7054607fc..e97c33614fd1 100644
> --- a/drivers/mmc/host/sdhci-acpi.c
> +++ b/drivers/mmc/host/sdhci-acpi.c
> @@ -704,21 +704,21 @@ static const struct sdhci_acpi_uid_slot sdhci_acpi_uids[] = {
>  };
>  
>  static const struct acpi_device_id sdhci_acpi_ids[] = {
> -	{ "80865ACA" },
> -	{ "80865ACC" },
> -	{ "80865AD0" },
> -	{ "80860F14" },
> -	{ "80860F16" },
> -	{ "INT33BB"  },
> -	{ "INT33C6"  },
> -	{ "INT3436"  },
> -	{ "INT344D"  },
> -	{ "PNP0D40"  },
> -	{ "QCOM8051" },
> -	{ "QCOM8052" },
> -	{ "AMDI0040" },
> -	{ "AMDI0041" },
> -	{ },
> +	{ .id = "80865ACA" },
> +	{ .id = "80865ACC" },
> +	{ .id = "80865AD0" },
> +	{ .id = "80860F14" },
> +	{ .id = "80860F16" },
> +	{ .id = "INT33BB" },
> +	{ .id = "INT33C6" },
> +	{ .id = "INT3436" },
> +	{ .id = "INT344D" },
> +	{ .id = "PNP0D40" },
> +	{ .id = "QCOM8051" },
> +	{ .id = "QCOM8052" },
> +	{ .id = "AMDI0040" },
> +	{ .id = "AMDI0041" },
> +	{ }
>  };
>  MODULE_DEVICE_TABLE(acpi, sdhci_acpi_ids);
>  
> diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c
> index 35ef5c5f5146..db5bed2397f6 100644
> --- a/drivers/mmc/host/sdhci-iproc.c
> +++ b/drivers/mmc/host/sdhci-iproc.c
> @@ -350,7 +350,7 @@ static const struct acpi_device_id sdhci_iproc_acpi_ids[] = {
>  	{ .id = "BRCM5872", .driver_data = (kernel_ulong_t)&iproc_data },
>  	{ .id = "BCM2847",  .driver_data = (kernel_ulong_t)&bcm_arasan_data },
>  	{ .id = "BRCME88C", .driver_data = (kernel_ulong_t)&bcm2711_data },
> -	{ /* sentinel */ }
> +	{ }
>  };
>  MODULE_DEVICE_TABLE(acpi, sdhci_iproc_acpi_ids);
>  #endif
> diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
> index 09702022e708..113a9399d7dc 100644
> --- a/drivers/mmc/host/sdhci-of-dwcmshc.c
> +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
> @@ -2400,7 +2400,7 @@ static const struct acpi_device_id sdhci_dwcmshc_acpi_ids[] = {
>  		.id = "MLNXBF30",
>  		.driver_data = (kernel_ulong_t)&sdhci_dwcmshc_bf3_pdata,
>  	},
> -	{}
> +	{ }
>  };
>  MODULE_DEVICE_TABLE(acpi, sdhci_dwcmshc_acpi_ids);
>  #endif
> diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
> index 046e8100dd08..2e4926e722f3 100644
> --- a/drivers/mmc/host/sdhci-xenon.c
> +++ b/drivers/mmc/host/sdhci-xenon.c
> @@ -700,10 +700,10 @@ MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids);
>  
>  #ifdef CONFIG_ACPI
>  static const struct acpi_device_id sdhci_xenon_acpi_ids[] = {
> -	{ .id = "MRVL0002", XENON_AP806},
> -	{ .id = "MRVL0003", XENON_AP807},
> -	{ .id = "MRVL0004", XENON_CP110},
> -	{}
> +	{ .id = "MRVL0002", .driver_data = XENON_AP806 },
> +	{ .id = "MRVL0003", .driver_data = XENON_AP807 },
> +	{ .id = "MRVL0004", .driver_data = XENON_CP110 },
> +	{ }
>  };
>  MODULE_DEVICE_TABLE(acpi, sdhci_xenon_acpi_ids);
>  #endif
> diff --git a/drivers/mmc/host/sdhci_f_sdh30.c b/drivers/mmc/host/sdhci_f_sdh30.c
> index e9b934e159ad..f3d0a50d1a6f 100644
> --- a/drivers/mmc/host/sdhci_f_sdh30.c
> +++ b/drivers/mmc/host/sdhci_f_sdh30.c
> @@ -227,8 +227,8 @@ MODULE_DEVICE_TABLE(of, f_sdh30_dt_ids);
>  
>  #ifdef CONFIG_ACPI
>  static const struct acpi_device_id f_sdh30_acpi_ids[] = {
> -	{ "SCX0002" },
> -	{ /* sentinel */ }
> +	{ .id = "SCX0002" },
> +	{ }
>  };
>  MODULE_DEVICE_TABLE(acpi, f_sdh30_acpi_ids);
>  #endif
> 
> ---
> base-commit: f66469d9905b39d2c260a15d7d6db450f4db67c1
> change-id: 20261102-acpi-mmc-7bbb96467dd8
> 
> Best regards,
> --  
> Pawel Zalewski <pzalewski@thegoodpenguin.co.uk>
> 


  reply	other threads:[~2026-11-06 17:36 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-06 15:55 [PATCH] mmc: sdhci: Use named initializers for acpi_device_id Pawel Zalewski
2026-11-06 17:36 ` Adrian Hunter [this message]
2026-11-10  9:25   ` Pawel Zalewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2ba59618-e537-4593-a840-744b2f26eb4b@intel.com \
    --to=adrian.hunter@intel.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=huziji@marvell.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=pzalewski@thegoodpenguin.co.uk \
    --cc=rjui@broadcom.com \
    --cc=sbranden@broadcom.com \
    --cc=ulfh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.