From: Chinmay Rath <rathc@linux.ibm.com>
To: qemu-ppc@nongnu.org, qemu-devel@nongnu.org
Cc: npiggin@gmail.com, harshpb@linux.ibm.com, fam@euphon.net,
pbonzini@redhat.com, amachhiw@linux.ibm.com
Subject: Re: [PATCH] hw/scsi: validate IU buffer bounds in vscsi_preprocess_desc()
Date: Mon, 24 Aug 2026 10:24:47 +0530 [thread overview]
Message-ID: <2bb74d84-a91e-47f5-aa91-db031c4e0b44@linux.ibm.com> (raw)
In-Reply-To: <20260819095855.115823-1-rathc@linux.ibm.com>
On 8/19/26 15:28, Chinmay Rath wrote:
> cdb_offset and local_desc values are dependent on the guest. If the value
> is large enough, it can lead to an out-of-bounds read in vscsi_fetch_desc().
>
> Add an 'avail' constant in vscsi_preprocess_desc() representing the number of
> bytes available in srp_cmd.add_data[] and use it to prevent out-of-bound reads.
>
> Make all callers of vscsi_preprocess_desc() check its return value and
> handle failure accordingly.
>
> Closes: https://gitlab.com/qemu-project/qemu/-/work_items/4162
> Signed-off-by: Chinmay Rath <rathc@linux.ibm.com>
Reported-by: Lazymio <mio@lazym.io>
> ---
> hw/scsi/spapr_vscsi.c | 43 ++++++++++++++++++++++++++++++++++++++-----
> 1 file changed, 38 insertions(+), 5 deletions(-)
>
> diff --git a/hw/scsi/spapr_vscsi.c b/hw/scsi/spapr_vscsi.c
> index b4c8f94d22..9fef224727 100644
> --- a/hw/scsi/spapr_vscsi.c
> +++ b/hw/scsi/spapr_vscsi.c
> @@ -484,6 +484,8 @@ static int data_out_desc_size(struct srp_cmd *cmd)
> static int vscsi_preprocess_desc(vscsi_req *req)
> {
> struct srp_cmd *cmd = &req_iu(req)->srp.cmd;
> + /* bytes available for descriptors behind srp_cmd.add_data */
> + const unsigned avail = SRP_MAX_IU_LEN - offsetof(struct srp_cmd, add_data);
>
> req->cdb_offset = cmd->add_cdb_len & ~3;
>
> @@ -498,16 +500,35 @@ static int vscsi_preprocess_desc(vscsi_req *req)
> case SRP_NO_DATA_DESC:
> break;
> case SRP_DATA_DESC_DIRECT:
> + if (req->cdb_offset + sizeof(struct srp_direct_buf) > avail) {
> + fprintf(stderr,
> + "vscsi_preprocess_desc: direct desc out of bounds\n");
> + return -1;
> + }
> req->total_desc = req->local_desc = 1;
> break;
> case SRP_DATA_DESC_INDIRECT: {
> - struct srp_indirect_buf *ind_tmp = (struct srp_indirect_buf *)
> - (cmd->add_data + req->cdb_offset);
> + struct srp_indirect_buf *ind_tmp;
> +
> + if (req->cdb_offset + sizeof(struct srp_indirect_buf) > avail) {
> + fprintf(stderr,
> + "vscsi_preprocess_desc: indirect desc out of bounds\n");
> + return -1;
> + }
> + ind_tmp = (struct srp_indirect_buf *)(cmd->add_data + req->cdb_offset);
>
> req->total_desc = be32_to_cpu(ind_tmp->table_desc.len) /
> sizeof(struct srp_direct_buf);
> req->local_desc = req->writing ? cmd->data_out_desc_cnt :
> cmd->data_in_desc_cnt;
> +
> + /* desc_list[] entries must also fit inside the IU buffer */
> + if (req->local_desc * sizeof(struct srp_direct_buf) >
> + avail - req->cdb_offset - sizeof(struct srp_indirect_buf)) {
> + fprintf(stderr,
> + "vscsi_preprocess_desc: local_desc out of bounds\n");
> + return -1;
> + }
> break;
> }
> default:
> @@ -725,7 +746,11 @@ static void vscsi_inquiry_no_target(VSCSIState *s, vscsi_req *req)
> memcpy(&resp_data[8], "QEMU ", 8);
>
> req->writing = 0;
> - vscsi_preprocess_desc(req);
> + if (vscsi_preprocess_desc(req) < 0) {
> + vscsi_makeup_sense(s, req, HARDWARE_ERROR, 0, 0);
> + vscsi_send_rsp(s, req, CHECK_CONDITION, 0, 0);
> + return;
> + }
> rc = vscsi_srp_transfer_data(s, req, 0, resp_data, len);
> if (rc < 0) {
> vscsi_makeup_sense(s, req, HARDWARE_ERROR, 0, 0);
> @@ -775,7 +800,12 @@ static void vscsi_report_luns(VSCSIState *s, vscsi_req *req)
> i += 8;
> }
>
> - vscsi_preprocess_desc(req);
> + if (vscsi_preprocess_desc(req) < 0) {
> + g_free(resp_data);
> + vscsi_makeup_sense(s, req, HARDWARE_ERROR, 0, 0);
> + vscsi_send_rsp(s, req, CHECK_CONDITION, 0, 0);
> + return;
> + }
> rc = vscsi_srp_transfer_data(s, req, 0, resp_data, len);
> g_free(resp_data);
> if (rc < 0) {
> @@ -823,7 +853,10 @@ static int vscsi_queue_cmd(VSCSIState *s, vscsi_req *req)
> req->writing = (n < 1);
>
> /* Preprocess RDMA descriptors */
> - vscsi_preprocess_desc(req);
> + if (vscsi_preprocess_desc(req) < 0) {
> + scsi_req_cancel(req->sreq);
> + return 1;
> + }
>
> /* Get transfer direction and initiate transfer */
> if (n > 0) {
prev parent reply other threads:[~2026-08-24 4:56 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-19 9:58 [PATCH] hw/scsi: validate IU buffer bounds in vscsi_preprocess_desc() Chinmay Rath
2026-08-24 4:54 ` Chinmay Rath [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2bb74d84-a91e-47f5-aa91-db031c4e0b44@linux.ibm.com \
--to=rathc@linux.ibm.com \
--cc=amachhiw@linux.ibm.com \
--cc=fam@euphon.net \
--cc=harshpb@linux.ibm.com \
--cc=npiggin@gmail.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.