All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Tej Parkash" <tejparkash.d@gmail.com>
To: "Sam Ravnborg" <sam@ravnborg.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Linux-kernel-digest Digest, Vol 32, Issue 795
Date: Wed, 30 May 2007 20:52:29 +0530	[thread overview]
Message-ID: <2bd9ebfa0705300822s453fe5ccva18bf244e1551098@mail.gmail.com> (raw)
In-Reply-To: <20070530151209.GA15335@uranus.ravnborg.org>

On 5/30/07, Sam Ravnborg <sam@ravnborg.org> wrote:
> On Wed, May 30, 2007 at 08:07:53PM +0530, Tej Parkash wrote:
> > On 5/30/07, Tej Parkash <tejparkash.d@gmail.com> wrote:
> > >> > >
> > >> > > while building module i was getting following warning and it
> > >terminate
> > >> > > module building stage
> > >> > The below are only warnings and your build should succeed.
> > >> >
> > >> > It is obviously i386 - is it a clean allmodconfig or any changes?
> > >> > Is it latest -linus or some older version of the codebase?
> > >> Did an allmodconfig build of i386 - I see (almost) all warnings here.
> > >> So I will take a look based on this.
> >
> > yaa i got the warning but as i said building stage is also getting
> > terminated, without any error.
> >
> > >The MODPOST stage took a while but it proceeded with no hick-ups.
> > > MDOPSOT deals with ~2000 modules in my case and that consumes a bit
> > > of memory. Maybe you are hitting the limit with respect to available RAM
> > > / SWAP?
> > >
> > >        Sam
> > >
> > >
> > I don't think so that RAM or SWAP space is a constraint, is it related
> > to kernel build option or some change in arch. config files
> > I am not aware of the required patches for the same.
> Can you please post relevant parts of a build with make V=2
> That is the last couple of commands before the build suddenly stops.
> Also to error-code reported by make must be included.
>
> Ohh, and exact command-line + config you use.
>
>         Sam
>

make -C /lib/modules/2.6.21.3/build/ SUBDIR=/home/tej/Offload modules
make[1]: Entering directory `/home/tej/linux_src/linux-2.6.21.3'
  CHK     include/linux/version.h
  CHK     include/linux/utsrelease.h
  Building modules, stage 2.
  MODPOST 1889 modules
WARNING: vmlinux - Section mismatch: reference to
.init.text:start_kernel from .text between 'is386' (at offset
0xc0101171) and 'check_x87'
WARNING: vmlinux - Section mismatch: reference to .init.text: from
.text between 'rest_init' (at offset 0xc0101458) and 'try_name'
WARNING: vmlinux - Section mismatch: reference to
.init.text:__alloc_bootmem from .text between 'init_gdt' (at offset
0xc010adfb) and 'cpu_init'
WARNING: vmlinux - Section mismatch: reference to
.init.text:__alloc_bootmem from .text between 'init_gdt' (at offset
0xc010ae11) and 'cpu_init'
WARNING: vmlinux - Section mismatch: reference to
.init.text:sysenter_setup from .text between 'identify_cpu' (at offset
0xc010b46b) and 'display_cacheinfo'
WARNING: vmlinux - Section mismatch: reference to
.init.text:mtrr_bp_init from .text between 'identify_cpu' (at offset
0xc010b475) and 'display_cacheinfo'
WARNING: vmlinux - Section mismatch: reference to
.init.text:trap_init_f00f_bug from .text between 'init_intel' (at
offset 0xc010d576) and 'cpuid4_cache_lookup'
WARNING: vmlinux - Section mismatch: reference to .init.text: from
.text between 'iret_exc' (at offset 0xc02f2c2e) and '_etext'
WARNING: vmlinux - Section mismatch: reference to
.init.data:initkmem_list3 from .text between 'set_up_list3s' (at
offset 0xc0173aff) and 's_start'
WARNING: vmlinux - Section mismatch: reference to
.init.text:eisa_root_register from .text between
'virtual_eisa_root_init' (at offset 0xc026fecf) and
'cpufreq_unregister_driver'
WARNING: vmlinux - Section mismatch: reference to .init.text: from
.text between 'iret_exc' (at offset 0xc02f32c8) and '_etext'
make[1]: Leaving directory `/home/tej/linux_src/linux-2.6.21.3'


the actaul kernel where i am running this make is in
/home/tej/linux_src/linux-2.6.21.3.

thanks
tej

  reply	other threads:[~2007-05-30 15:23 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <mailman.13746.1180510421.20629.linux-kernel-digest@lists.us.dell.com>
     [not found] ` <2bd9ebfa0705300735l51dcf4ceubf7f83ab44703010@mail.gmail.com>
2007-05-30 14:37   ` Linux-kernel-digest Digest, Vol 32, Issue 795 Tej Parkash
2007-05-30 15:12     ` Sam Ravnborg
2007-05-30 15:22       ` Tej Parkash [this message]
2007-05-30 15:36         ` Sam Ravnborg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2bd9ebfa0705300822s453fe5ccva18bf244e1551098@mail.gmail.com \
    --to=tejparkash.d@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sam@ravnborg.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.