From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/3] arm: socfpga: a10: move SPL stack size to Kconfig
Date: Thu, 28 Feb 2019 22:27:14 +0100 [thread overview]
Message-ID: <2efec410-c162-e342-e233-e448640824d3@denx.de> (raw)
In-Reply-To: <20190228203348.28424-2-simon.k.r.goldschmidt@gmail.com>
On 2/28/19 9:33 PM, Simon Goldschmidt wrote:
> Instead of fixing the SPL stack to 64 KiB in the board config header via
> CONFIG_SYS_SPL_MALLOC_SIZE, let's just use CONFIG_SPL_SYS_MALLOC_F_LEN
> in the defconfig.
>
> This also has the advandage that it removes sub-mach specific ifdefs in
> socfpga_common.h.
>
> Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Can't we default these stack sizes with imply in Kconfig files instead ?
Then they won't have to be in the defconfigs either.
> ---
>
> configs/socfpga_arria10_defconfig | 1 +
> include/configs/socfpga_common.h | 14 --------------
> 2 files changed, 1 insertion(+), 14 deletions(-)
>
> diff --git a/configs/socfpga_arria10_defconfig b/configs/socfpga_arria10_defconfig
> index f321a0ac3b..8d0479cc05 100644
> --- a/configs/socfpga_arria10_defconfig
> +++ b/configs/socfpga_arria10_defconfig
> @@ -2,6 +2,7 @@ CONFIG_ARM=y
> CONFIG_ARCH_SOCFPGA=y
> CONFIG_SYS_TEXT_BASE=0x01000040
> CONFIG_SYS_MALLOC_F_LEN=0x2000
> +CONFIG_SPL_SYS_MALLOC_F_LEN=0x10000
> CONFIG_TARGET_SOCFPGA_ARRIA10_SOCDK=y
> CONFIG_SPL=y
> CONFIG_IDENT_STRING="socfpga_arria10"
> diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
> index a3fbca0a5d..c23b34186a 100644
> --- a/include/configs/socfpga_common.h
> +++ b/include/configs/socfpga_common.h
> @@ -251,16 +251,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
> #define CONFIG_SPL_TEXT_BASE CONFIG_SYS_INIT_RAM_ADDR
> #define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT_RAM_SIZE
>
> -#if defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
> -/* SPL memory allocation configuration, this is for FAT implementation */
> -#ifndef CONFIG_SYS_SPL_MALLOC_START
> -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000
> -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_INIT_RAM_SIZE - \
> - CONFIG_SYS_SPL_MALLOC_SIZE + \
> - CONFIG_SYS_INIT_RAM_ADDR)
> -#endif
> -#endif
> -
> /* SPL SDMMC boot support */
> #ifdef CONFIG_SPL_MMC_SUPPORT
> #if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
> @@ -287,11 +277,7 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
> /*
> * Stack setup
> */
> -#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
> #define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
> -#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
> -#define CONFIG_SPL_STACK CONFIG_SYS_SPL_MALLOC_START
> -#endif
>
> /* Extra Environment */
> #ifndef CONFIG_SPL_BUILD
>
--
Best regards,
Marek Vasut
next prev parent reply other threads:[~2019-02-28 21:27 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-28 20:33 [U-Boot] [PATCH 1/3] arm: socfpga: fix comment about SPL memory layout Simon Goldschmidt
2019-02-28 20:33 ` [U-Boot] [PATCH 2/3] arm: socfpga: a10: move SPL stack size to Kconfig Simon Goldschmidt
2019-02-28 21:27 ` Marek Vasut [this message]
2019-03-01 7:48 ` Simon Goldschmidt
2019-03-01 11:40 ` Marek Vasut
2019-02-28 20:33 ` [U-Boot] [PATCH 3/3] arm: socfpga: put initial U-Boot stack into DDR Simon Goldschmidt
2019-02-28 21:30 ` Marek Vasut
2019-03-01 7:55 ` Simon Goldschmidt
2019-03-01 11:42 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2efec410-c162-e342-e233-e448640824d3@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.