Re: [PATCH 2/2] ARM: dts: rockchip: enable HS200/DDR52 mode for emmc on rk3288-popmetal

[Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>]

Am Montag, 10. Oktober 2016, 20:33:46 CEST schrieb Shawn Lin:
> Enable these two modes to speed up the booting and improve
> the performance.
> 
> Signed-off-by: Shawn Lin <shawn.lin-TNX95d0MmH7DzftRWevZcw@public.gmane.org>

applied both patches for 4.10 after moving the mmc-* above non-removable


Thanks
Heiko

> ---
> 
>  arch/arm/boot/dts/rk3288-popmetal.dts | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts
> b/arch/arm/boot/dts/rk3288-popmetal.dts index 3831cd5..7500e98 100644
> --- a/arch/arm/boot/dts/rk3288-popmetal.dts
> +++ b/arch/arm/boot/dts/rk3288-popmetal.dts
> @@ -148,6 +148,8 @@
>  	cap-mmc-highspeed;
>  	disable-wp;
>  	non-removable;
> +	mmc-ddr-1_8v;
> +	mmc-hs200-1_8v;
>  	num-slots = <1>;
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;