All of lore.kernel.org
 help / color / mirror / Atom feed
From: Christian Lamparter <chunkeey@googlemail.com>
To: "ath10k@lists.infradead.org" <ath10k@lists.infradead.org>
Cc: "Valo, Kalle" <kvalo@qca.qualcomm.com>
Subject: IPQ4019 Firmware: board-2.bin vs board.bin
Date: Fri, 18 Nov 2016 17:46:14 +0100	[thread overview]
Message-ID: <3020314.NNveBmB38o@debian64> (raw)

Hello,

I've acquired a IPQ4019 Router (Asus RT-AC58U). And It has a IPQ4019-SoC.
I'm currently in the process of porting it to LEDE. I can report that the
router is booting and I got the ath10k to work with 4.8.8 +
LEDE's compat-wireless (2016-10-08-1).

Now, I ran across a small discrepancy with the provided firmware for
the IPQ4019. From the ath10k's driver prospective it seems that the
board-2.bin provided on github[0] has the wrong filename:

ath10k_ahb a000000.wifi: Direct firmware load for ath10k/pre-cal-ahb-a000000.wifi.bin failed with error -2
ath10k_ahb a000000.wifi: Falling back to user helper
firmware ath10k!pre-cal-ahb-a000000.wifi.bin: firmware_loading_store: map pages failed
ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
ath10k_ahb a000000.wifi: firmware ver 10.4-3.2.1-00044 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param crc32 b9833652
ath10k_ahb a000000.wifi: failed to fetch board data for bus=ahb,vendor=0000,device=0000,subsystem-vendor=0000,subsystem-devn
ath10k_ahb a000000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/board.bin failed with error -2
ath10k_ahb a000000.wifi: Falling back to user helper
firmware ath10k!QCA4019!hw1.0!board.bin: firmware_loading_store: map pages failed
ath10k_ahb a000000.wifi: failed to fetch board data
ath10k_ahb a000000.wifi: failed to fetch board file: -11
ath10k_ahb a000000.wifi: could not probe fw (-11)

Now, If I rename board-2.bin to board.bin it works fine and the device initializes
successfully (and seems to work too):

ath10k_ahb a000000.wifi: Direct firmware load for ath10k/pre-cal-ahb-a000000.wifi.bin failed with error -2
ath10k_ahb a000000.wifi: Falling back to user helper
firmware ath10k!pre-cal-ahb-a000000.wifi.bin: firmware_loading_store: map pages failed
ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1
ath10k_ahb a000000.wifi: firmware ver 10.4-3.2.1-00044 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param crc32 b9833652
ath10k_ahb a000000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/board-2.bin failed with error -2
ath10k_ahb a000000.wifi: Falling back to user helper
firmware ath10k!QCA4019!hw1.0!board-2.bin: firmware_loading_store: map pages failed
ath10k_ahb a000000.wifi: board_file api 1 bmi_id N/A crc32 9e6ce62c
ath10k_ahb a000000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal file max-sta 512 raw 0 hwcrypto 1
ath: EEPROM regdomain: 0x0
ath: EEPROM indicates default country code should be used
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a

What's up with the board-2.bin name? Kalle, can you rename it or
should ath10k look for board-2.bin instead?

Regards,
Christian

[0] <https://github.com/kvalo/ath10k-firmware/tree/master/QCA4019/hw1.0>


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

             reply	other threads:[~2016-11-18 16:46 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-18 16:46 Christian Lamparter [this message]
2016-11-18 17:25 ` IPQ4019 Firmware: board-2.bin vs board.bin Michal Kazior
2016-11-18 18:40   ` Christian Lamparter
2016-11-18 18:45     ` Ben Greear
2016-11-18 19:12     ` Michal Kazior
2016-11-18 21:40       ` Christian Lamparter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3020314.NNveBmB38o@debian64 \
    --to=chunkeey@googlemail.com \
    --cc=ath10k@lists.infradead.org \
    --cc=kvalo@qca.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.