From: kerby2000 <lukin.s.v@gmail.com>
To: linux-kernel@vger.kernel.org
Subject: Re: [2.6.33-rc8] kernel BUG at mm/slub.c:2969!
Date: Fri, 10 Dec 2010 06:07:16 -0800 (PST) [thread overview]
Message-ID: <30426415.post@talk.nabble.com> (raw)
In-Reply-To: <4B82E9FC.2020708@wpkg.org>
I just installed Debian squeeze
and I'm getting very similar error. Any clues what it might be? And how to
solve it
[ 9595.087256] ------------[ cut here ]------------
[ 9595.087261] kernel BUG at
/build/buildd-linux-2.6_2.6.32-28-amd64-EUJiNq/linux-2.6-2.6.32/debian/build/source_amd64_non
e/mm/slub.c:2969!
[ 9595.087263] invalid opcode: 0000 [#1] SMP
[ 9595.087266] last sysfs file:
/sys/devices/pci0000:00/0000:00:03.0/0000:02:00.0/0000:03:00.0/0000:04:00.0/host0/target0:
0:0/0:0:0:0/block/sda/sda3/uevent
[ 9595.087269] CPU 3
[ 9595.087270] Modules linked in: cpufreq_conservative cpufreq_powersave
cpufreq_userspace cpufreq_stats parport_pc ppdev
lp parport sco bridge stp bnep l2cap bluetooth rfkill binfmt_misc fuse ext3
jbd loop radeon ttm drm_kms_helper drm i2c_alg
o_bit i2c_i801 i5400_edac rng_core edac_core i2c_core ioatdma shpchp
pci_hotplug i5k_amb processor evdev pcspkr container
psmouse button serio_raw ext4 mbcache jbd2 crc16 sd_mod crc_t10dif sg sr_mod
cdrom ata_generic ata_piix 3w_9xxx uhci_hcd e
hci_hcd libata usbcore nls_base thermal thermal_sys igb dca floppy scsi_mod
[last unloaded: scsi_wait_scan]
[ 9595.087313] Pid: 2097, comm: udisks-daemon Not tainted 2.6.32-5-amd64 #1
X7DWU
[ 9595.087315] RIP: 0010:[<ffffffff810e6e5f>] [<ffffffff810e6e5f>]
kfree+0x55/0xcb
[ 9595.087324] RSP: 0018:ffff88012e6a5a48 EFLAGS: 00010246
[ 9595.087325] RAX: 0200000000080000 RBX: ffff88012ce73330 RCX:
00000000002a0008
[ 9595.087327] RDX: ffff88012ce73300 RSI: ffffea00041e5040 RDI:
ffffea0003800000
[ 9595.087329] RBP: ffff880100000000 R08: 0000000000000000 R09:
ffffffff81451930
[ 9595.087331] R10: ffff8800055901b0 R11: ffffffff810b56db R12:
ffffffffa00d06db
[ 9595.087333] R13: 0000000000000001 R14: ffff880100000000 R15:
ffff88012f680020
[ 9595.087335] FS: 00007f54a81617a0(0000) GS:ffff880005580000(0000)
knlGS:0000000000000000
[ 9595.087337] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 9595.087339] CR2: 00007fb285e57390 CR3: 000000012e6d9000 CR4:
00000000000006e0
[ 9595.087341] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 9595.087343] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[ 9595.087345] Process udisks-daemon (pid: 2097, threadinfo
ffff88012e6a4000, task ffff88012d8c7810)
[ 9595.087347] Stack:
[ 9595.087348] ffff88012ce73330 ffff88012ce73300 0000000000000000
ffffffffa00d06db
[ 9595.087351] <0> 0000000000000296 ffff88012e6a5a98 ffff88012e6a5ef8
ffffffff810678b3
[ 9595.087354] <0> ffff88012e6a5b88 ffffffff812faaf6 ffff88011f479a99
0000000000000000
[ 9595.087357] Call Trace:
[ 9595.087363] [<ffffffffa00d06db>] ? sr_media_change+0x253/0x27a [sr_mod]
[ 9595.087368] [<ffffffff810678b3>] ? hrtimer_cancel+0xc/0x16
[ 9595.087373] [<ffffffff812faaf6>] ? schedule_hrtimeout_range+0xd5/0x112
[ 9595.087378] [<ffffffffa0026074>] ? media_changed+0x42/0x74 [cdrom]
[ 9595.087383] [<ffffffff811115c2>] ? check_disk_change+0x22/0x53
[ 9595.087387] [<ffffffffa002a84c>] ? cdrom_open+0x8d2/0x962 [cdrom]
[ 9595.087391] [<ffffffff810fb8ee>] ? do_sys_poll+0x316/0x391
[ 9595.087393] [<ffffffff810fc59b>] ? __pollwait+0x0/0xd6
[ 9595.087396] [<ffffffff810fc671>] ? pollwake+0x0/0x5b
[ 9595.087399] [<ffffffff810fc671>] ? pollwake+0x0/0x5b
[ 9595.087403] [<ffffffff8118f05b>] ? kobject_get+0x12/0x17
[ 9595.087406] [<ffffffff81183e6c>] ? get_disk+0x95/0xb4
[ 9595.087411] [<ffffffff81221e84>] ? kobj_lookup+0x169/0x1a1
[ 9595.087413] [<ffffffff8118f05b>] ? kobject_get+0x12/0x17
[ 9595.087417] [<ffffffffa00d0464>] ? sr_block_open+0x86/0x9f [sr_mod]
[ 9595.087420] [<ffffffff811122d3>] ? __blkdev_get+0xc6/0x342
[ 9595.087423] [<ffffffff81112556>] ? blkdev_open+0x0/0x96
[ 9595.087426] [<ffffffff811125bd>] ? blkdev_open+0x67/0x96
[ 9595.087429] [<ffffffff810ecfae>] ? __dentry_open+0x19d/0x2bf
[ 9595.087432] [<ffffffff810f87a7>] ? do_filp_open+0x4e4/0x94b
[ 9595.087436] [<ffffffffa0027ecd>] ? cdrom_release+0x1ae/0x1fe [cdrom]
[ 9595.087439] [<ffffffff810e4323>] ? get_partial_node+0x15/0x85
[ 9595.087444] [<ffffffff81097866>] ? rcu_start_gp+0x197/0x1c0
[ 9595.087446] [<ffffffff810f8c76>] ? getname+0x23/0x1a0
[ 9595.087450] [<ffffffff811017d9>] ? alloc_fd+0x67/0x10c
[ 9595.087453] [<ffffffff810ecd3f>] ? do_sys_open+0x55/0xfc
[ 9595.087456] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b
[ 9595.087458] Code: 83 c3 08 48 83 3b 00 eb ec 48 83 fd 10 0f 86 89 00 00
00 48 89 ef e8 b9 e8 ff ff 48 89 c7 48 8b 00 84
c0 78 13 66 a9 00 c0 75 04 <0f> 0b eb fe 5b 5d 41 5c e9 fc 56 fd ff 48 8b 4c
24 18 4c 8b 4f
[ 9595.087481] RIP [<ffffffff810e6e5f>] kfree+0x55/0xcb
[ 9595.087484] RSP <ffff88012e6a5a48>
[ 9595.087486] ---[ end trace 59edb4d61eb57101 ]---
mangoo wrote:
>
> I just tried how 2.6.33-rc8 works here, and it doesn't like my hardware
> very much.
>
> If you need more info, let me know.
>
> [ 115.623583] ------------[ cut here ]------------
> [ 115.623586] kernel BUG at mm/slub.c:2969!
> [ 115.623588] invalid opcode: 0000 [#1] SMP
> [ 115.623590] last sysfs file:
> /sys/devices/system/cpu/cpu7/cache/index2/shared_cpu_map
> [ 115.623592] CPU 2
> [ 115.623594] Pid: 1707, comm: hald-addon-stor Not tainted
> 2.6.33-desktop-0.rc8.1mnb #1 DX58SO/
> [ 115.623596] RIP: 0010:[<ffffffff8111dca3>] [<ffffffff8111dca3>]
> kfree+0x133/0x140
> [ 115.623602] RSP: 0018:ffff8802354a3a58 EFLAGS: 00010246
> [ 115.623604] RAX: 0200000000100068 RBX: ffffffffa0089318 RCX:
> 0000000000000001
> [ 115.623605] RDX: 0000000001000000 RSI: ffffea0007000000 RDI:
> ffff880200000000
> [ 115.623606] RBP: ffff8802354a3a78 R08: 0000000000000000 R09:
> 0000000000000000
> [ 115.623608] R10: 0000000000000000 R11: ffff880008c55808 R12:
> ffff880200000000
> [ 115.623609] R13: ffff880200000000 R14: 0000000000000010 R15:
> 00000000000000dd
> [ 115.623611] FS: 00007f9dd5897700(0000) GS:ffff880008c40000(0000)
> knlGS:0000000000000000
> [ 115.623613] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> [ 115.623614] CR2: 00007fff3b2fb718 CR3: 000000023543b000 CR4:
> 00000000000006e0
> [ 115.623616] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
> 0000000000000000
> [ 115.623617] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
> 0000000000000400
> [ 115.623619] Process hald-addon-stor (pid: 1707, threadinfo
> ffff8802354a2000, task ffff880235482ce0)
> [ 115.623620] Stack:
> [ 115.623621] ffff88023d61ce40 ffff88023d61ce40 ffff88023d61ce70
> ffff880200000000
> [ 115.623623] <0> ffff8802354a3b18 ffffffffa0089318 0000000000000001
> 0000000000000000
> [ 115.623626] <0> 0000000000000000 ffff8802354a2000 0000000000000000
> 0000000000000001
> [ 115.623628] Call Trace:
> [ 115.623633] [<ffffffffa0089318>] sr_media_change+0x138/0x300 [sr_mod]
> [ 115.623638] [<ffffffff813b8d8d>] ? __reacquire_kernel_lock+0x4d/0x80
> [ 115.623641] [<ffffffff812ba820>] media_changed+0x70/0xc0
> [ 115.623643] [<ffffffff812ba8a7>] cdrom_media_changed+0x37/0x40
> [ 115.623646] [<ffffffffa00883e9>] sr_block_media_changed+0x19/0x20
> [sr_mod]
> [ 115.623650] [<ffffffff811564a3>] check_disk_change+0x33/0x70
> [ 115.623653] [<ffffffff812bd4f8>] cdrom_open+0x248/0x600
> [ 115.623655] [<ffffffff811f00fa>] ? kobject_get+0x1a/0x30
> [ 115.623658] [<ffffffff81157dc0>] ? blkdev_open+0x0/0xc0
> [ 115.623661] [<ffffffff811e15fd>] ? get_disk+0x7d/0xf0
> [ 115.623663] [<ffffffff811f00fa>] ? kobject_get+0x1a/0x30
> [ 115.623665] [<ffffffffa00885a9>] sr_block_open+0x79/0xd0 [sr_mod]
> [ 115.623669] [<ffffffff812a3d49>] ? get_device+0x19/0x20
> [ 115.623671] [<ffffffff81157a61>] __blkdev_get+0xa1/0x3e0
> [ 115.623673] [<ffffffff81157dc0>] ? blkdev_open+0x0/0xc0
> [ 115.623674] [<ffffffff81157db0>] blkdev_get+0x10/0x20
> [ 115.623676] [<ffffffff81157e31>] blkdev_open+0x71/0xc0
> [ 115.623679] [<ffffffff811267ea>] __dentry_open+0x10a/0x350
> [ 115.623682] [<ffffffff811b85df>] ? security_inode_permission+0x1f/0x30
> [ 115.623685] [<ffffffff81126b44>] nameidata_to_filp+0x54/0x70
> [ 115.623687] [<ffffffff81136ba0>] do_filp_open+0x950/0xd60
> [ 115.623690] [<ffffffff812a3dc7>] ? put_device+0x17/0x20
> [ 115.623696] [<ffffffffa012d124>] ? scsi_device_put+0x44/0x60
> [scsi_mod]
> [ 115.623699] [<ffffffff811414a3>] ? alloc_fd+0x53/0x140
> [ 115.623701] [<ffffffff81126599>] do_sys_open+0x69/0x140
> [ 115.623703] [<ffffffff811266b0>] sys_open+0x20/0x30
> [ 115.623706] [<ffffffff8100a002>] system_call_fastpath+0x16/0x1b
> [ 115.623707] Code: c4 c7 57 00 4d 85 ed 0f 84 1b ff ff ff 49 8b 45 00 49
> 83 c5 08 4c 89 e6 48 89 df ff d0 49 8b 45 00 48 85 c0 75 eb e9 fd fe ff ff
> <0f> 0b eb fe 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 0f 1f 44 00
> [ 115.623725] RIP [<ffffffff8111dca3>] kfree+0x133/0x140
> [ 115.623728] RSP <ffff8802354a3a58>
> [ 115.623730] ---[ end trace 638cfe9483a8fb12 ]---
>
>
>
> --
> Tomasz Chmielewski
> http://wpkg.org
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
>
--
View this message in context: http://old.nabble.com/-2.6.33-rc8--kernel-BUG-at-mm-slub.c%3A2969%21-tp27693913p30426415.html
Sent from the linux-kernel mailing list archive at Nabble.com.
prev parent reply other threads:[~2010-12-10 14:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-22 20:33 [2.6.33-rc8] kernel BUG at mm/slub.c:2969! Tomasz Chmielewski
2010-12-10 14:07 ` kerby2000 [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=30426415.post@talk.nabble.com \
--to=lukin.s.v@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.