From: alupu@verizon.net
To: Larry.Finger@lwfinger.net
Cc: linux-wireless@vger.kernel.org
Subject: Re: r8712u staging in kernel 3.2.9
Date: Fri, 09 Mar 2012 13:06:10 -0600 (CST) [thread overview]
Message-ID: <30444020.391741.1331319970885.JavaMail.root@vms170029> (raw)
[-- Attachment #1: Type: text/plain, Size: 504 bytes --]
> On 03/07/12 11:16 AM, Larry Finger wrote:
> To help debug the problem, the attached patch will log the setting of
> the ESSID in the driver.
> For some reason, there is one garbage printout and the correct
> one for every call, but that should not cause a problem.
Hi Larry,
I applied the "debug" patch you sent and I followed your test instructions.
Still, the same problem.
Moreover I didn't see any debug output; maybe I'm missing something.
The log of my test is attached.
Regards,
-- Alex
[-- Attachment #2: temp3.txt --]
[-- Type: text/plain, Size: 5272 bytes --]
[/linux-3.2.9/drivers/staging/rtl8712]$ ls -og rtl871x_ioctl_linux*
-rw-rw-r-- 1 70837 2012-03-09 12:58 rtl871x_ioctl_linux.c
-rw-rw-r-- 1 70549 2012-02-29 19:32 rtl871x_ioctl_linux.c-orig
-rw-r--r-- 1 237684 2012-03-09 13:11 rtl871x_ioctl_linux.o
------
[/linux-3.2.9/drivers/staging/rtl8712]$ diff rtl871x_ioctl_linux.c-orig \
rtl871x_ioctl_linux.c
1296c1296,1297
< if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY))
---
> if (check_fwstate(pmlmepriv, _FW_UNDER_SURVEY)) {
> printk(KERN_INFO "*********** in %s - Returned -EBUSY\n", __func__);
1298c1299,1301
< if (check_fwstate(pmlmepriv, _FW_UNDER_LINKING))
---
> }
> if (check_fwstate(pmlmepriv, _FW_UNDER_LINKING)) {
> printk(KERN_INFO "*********** in %s - Returned 0\n", __func__);
1300c1303,1305
< if (wrqu->essid.length > IW_ESSID_MAX_SIZE)
---
> }
> if (wrqu->essid.length > IW_ESSID_MAX_SIZE) {
> printk(KERN_INFO "*********** in %s - Returned -E2BIG\n", __func__);
1301a1307
> }
1340a1347
> printk(KERN_INFO "r8712u: Set ESSID to %s\n", ndis_ssid.Ssid);
-----------------------------------------------------------------
[~/Temp]$ iwconfig --version
iwconfig Wireless-Tools version 29
Compatible with Wireless Extension v11 to v22.
Kernel Currently compiled with Wireless Extension v22.
------
usb 8-1: new high-speed USB device number 2 using ehci_hcd
r8712u: module is from the staging directory, the quality is unknown, you have
been warned.
r8712u: DriverVersion: v7_0.20100831
r8712u: register rtl8712_netdev_ops to netdev_ops
r8712u: USB_SPEED_HIGH with 4 endpoints
r8712u: Boot from EFUSE: Autoload OK
r8712u: CustomerID = 0x0000
r8712u: MAC Address from efuse = 00:1a:ef:25:2d:f9
r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
usbcore: registered new interface driver r8712u
------
[~/Temp]$ iwconfig --version
iwconfig Wireless-Tools version 29
Compatible with Wireless Extension v11 to v22.
Kernel Currently compiled with Wireless Extension v22.
wlan0 Recommend Wireless Extension v16 or later,
Currently compiled with Wireless Extension v22.
------
[~/Temp]$ iwconfig wlan0
wlan0 unassociated Nickname:"rtl_wifi"
Mode:Auto Access Point: Not-Associated Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
------
[~/Temp]$ iwconfig wlan0 essid radius
r8712u: Set ESSID to radius
------
[~/Temp]$ iwconfig wlan0
wlan0 unassociated Nickname:"rtl_wifi"
Mode:Auto Access Point: Not-Associated Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
------
[~/Temp]$ iwconfig wlan0 key restricted 1234f0033edaebf3f7dab4ceca
r8712u: r8711_wx_set_enc: IW_ENCODE_RESTRICTED
------
[~/Temp]$ iwconfig wlan0
wlan0 unassociated Nickname:"rtl_wifi"
Mode:Auto Access Point: Not-Associated Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
------
Excerpt from 'dmesg':
usb 8-1: new high-speed USB device number 2 using ehci_hcd
r8712u: module is from the staging directory, the quality is unknown, you have
been warned.
r8712u: DriverVersion: v7_0.20100831
r8712u: register rtl8712_netdev_ops to netdev_ops
r8712u: USB_SPEED_HIGH with 4 endpoints
r8712u: Boot from EFUSE: Autoload OK
r8712u: CustomerID = 0x0000
r8712u: MAC Address from efuse = 00:1a:ef:25:2d:f9
r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
usbcore: registered new interface driver r8712u
r8712u: Set ESSID to radius
r8712u: r8711_wx_set_enc: IW_ENCODE_RESTRICTED
------
Tail of 'kern.log':
Mar 9 13:23:25 AlexLFS kernel: usb 8-1: new high-speed USB device number 2
using ehci_hcd
Mar 9 13:23:25 AlexLFS kernel: r8712u: module is from the staging directory,
the quality is unknown, you have been warned.
Mar 9 13:23:25 AlexLFS kernel: r8712u: DriverVersion: v7_0.20100831
Mar 9 13:23:25 AlexLFS kernel: r8712u: register rtl8712_netdev_ops to
netdev_ops
Mar 9 13:23:25 AlexLFS kernel: r8712u: USB_SPEED_HIGH with 4 endpoints
Mar 9 13:23:25 AlexLFS kernel: r8712u: Boot from EFUSE: Autoload OK
Mar 9 13:23:25 AlexLFS kernel: r8712u: CustomerID = 0x0000
Mar 9 13:23:25 AlexLFS kernel: r8712u: MAC Address from efuse =
00:1a:ef:25:2d:f9
Mar 9 13:23:25 AlexLFS kernel: r8712u: Loading firmware from
"rtlwifi/rtl8712u.bin"
Mar 9 13:23:25 AlexLFS kernel: usbcore: registered new interface driver
r8712u
Mar 9 13:26:48 AlexLFS kernel: r8712u: Set ESSID to radius
Mar 9 13:29:59 AlexLFS kernel: r8712u: r8711_wx_set_enc: IW_ENCODE_RESTRICTED
Mar 9 13:42:39 AlexLFS kernel: usb 8-1: USB disconnect, device number 2
next reply other threads:[~2012-03-09 20:06 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-09 19:06 alupu [this message]
2012-03-10 2:17 ` r8712u staging in kernel 3.2.9 Larry Finger
-- strict thread matches above, loose matches on Subject: below --
2012-03-13 4:13 alupu
2012-03-12 23:02 alupu
2012-03-13 0:54 ` Larry Finger
2012-03-12 1:46 alupu
2012-03-12 2:54 ` Larry Finger
2012-03-11 22:36 alupu
2012-03-12 0:19 ` Larry Finger
2012-03-11 19:57 alupu
2012-03-11 19:57 alupu
2012-03-10 18:10 alupu
2012-03-11 4:23 ` Larry Finger
2012-03-10 4:53 alupu
2012-03-07 5:31 alupu
2012-03-07 16:15 ` Larry Finger
[not found] <31991817.2926129.1331079358141.JavaMail.root@vznit170116>
2012-03-07 3:22 ` Larry Finger
2012-03-07 1:44 alupu
2012-03-06 2:22 alupu
2012-03-06 20:21 ` Larry Finger
2012-03-05 17:07 alupu
2012-03-05 19:10 ` Larry Finger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=30444020.391741.1331319970885.JavaMail.root@vms170029 \
--to=alupu@verizon.net \
--cc=Larry.Finger@lwfinger.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.