Re: [PATCH v3 15/20] mtd: nand: qcom: support for command descriptor formation

[Abhishek Sahu <absahu@codeaurora.org>]

On 2017-08-05 21:49, Abhishek Sahu wrote:
> 1. Add the function for command descriptor preparation which will
>    be used only by BAM DMA and it will form the DMA descriptors
>    containing command elements
> 2. DMA_PREP_CMD flag should be used for forming command DMA
>    descriptors
> 
> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>

  This patch has build dependency on
  http://www.spinics.net/lists/dmaengine/msg13665.html

> ---
>  drivers/mtd/nand/qcom_nandc.c | 108 
> +++++++++++++++++++++++++++++++++++-------
>  1 file changed, 92 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/mtd/nand/qcom_nandc.c 
> b/drivers/mtd/nand/qcom_nandc.c
> index 9c12404..16463ac 100644
> --- a/drivers/mtd/nand/qcom_nandc.c
> +++ b/drivers/mtd/nand/qcom_nandc.c
> @@ -196,6 +196,14 @@
>  	      ((size) << READ_LOCATION_SIZE) |			\
>  	      ((is_last) << READ_LOCATION_LAST))
> 
> +/* Returns the NAND register physical address */
> +#define nandc_reg_phys(chip, offset) ((chip)->base_phys + (offset))
> +
> +/* Returns the dma address for reg read buffer */
> +#define reg_buf_dma_addr(chip, vaddr) \
> +	((chip)->reg_read_dma + \
> +	((uint8_t *)(vaddr) - (uint8_t *)(chip)->reg_read_buf))
> +
>  /* Returns the actual register address for NAND_FLASH_DEV_* */
>  #define nandc_dev_addr(nandc, reg) ((nandc)->props->flash_dev_offset + 
> (reg))
> 
> @@ -313,7 +321,8 @@ struct nandc_regs {
>   *				controller
>   * @dev:			parent device
>   * @base:			MMIO base
> - * @base_dma:			physical base address of controller registers
> + * @base_phys:			physical base address of controller registers
> + * @base_dma:			dma base address of controller registers
>   * @core_clk:			controller clock
>   * @aon_clk:			another controller clock
>   *
> @@ -346,6 +355,7 @@ struct qcom_nand_controller {
>  	struct device *dev;
> 
>  	void __iomem *base;
> +	phys_addr_t base_phys;
>  	dma_addr_t base_dma;
> 
>  	struct clk *core_clk;
> @@ -747,6 +757,66 @@ static int prepare_bam_async_desc(struct
> qcom_nand_controller *nandc,
>  }
> 
>  /*
> + * Prepares the command descriptor for BAM DMA which will be used for 
> NAND
> + * register reads and writes. The command descriptor requires the 
> command
> + * to be formed in command element type so this function uses the 
> command
> + * element from bam transaction ce array and fills the same with 
> required
> + * data. A single SGL can contain multiple command elements so
> + * NAND_BAM_NEXT_SGL will be used for starting the separate SGL
> + * after the current command element.
> + */
> +static int prep_bam_dma_desc_cmd(struct qcom_nand_controller *nandc, 
> bool read,
> +				 int reg_off, const void *vaddr,
> +				 int size, unsigned int flags)
> +{
> +	int bam_ce_size;
> +	int i, ret;
> +	struct bam_cmd_element *bam_ce_buffer;
> +	struct bam_transaction *bam_txn = nandc->bam_txn;
> +
> +	bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_pos];
> +
> +	/* fill the command desc */
> +	for (i = 0; i < size; i++) {
> +		if (read)
> +			bam_prep_ce(&bam_ce_buffer[i],
> +				    nandc_reg_phys(nandc, reg_off + 4 * i),
> +				    BAM_READ_COMMAND,
> +				    reg_buf_dma_addr(nandc,
> +						     (__le32 *)vaddr + i));
> +		else
> +			bam_prep_ce_le32(&bam_ce_buffer[i],
> +					 nandc_reg_phys(nandc, reg_off + 4 * i),
> +					 BAM_WRITE_COMMAND,
> +					 *((__le32 *)vaddr + i));
> +	}
> +
> +	bam_txn->bam_ce_pos += size;
> +
> +	/* use the separate sgl after this command */
> +	if (flags & NAND_BAM_NEXT_SGL) {
> +		bam_ce_buffer = &bam_txn->bam_ce[bam_txn->bam_ce_start];
> +		bam_ce_size = (bam_txn->bam_ce_pos -
> +				bam_txn->bam_ce_start) *
> +				sizeof(struct bam_cmd_element);
> +		sg_set_buf(&bam_txn->cmd_sgl[bam_txn->cmd_sgl_pos],
> +			   bam_ce_buffer, bam_ce_size);
> +		bam_txn->cmd_sgl_pos++;
> +		bam_txn->bam_ce_start = bam_txn->bam_ce_pos;
> +
> +		if (flags & NAND_BAM_NWD) {
> +			ret = prepare_bam_async_desc(nandc, nandc->cmd_chan,
> +						     DMA_PREP_FENCE |
> +						     DMA_PREP_CMD);
> +			if (ret)
> +				return ret;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +/*
>   * Prepares the data descriptor for BAM DMA which will be used for 
> NAND
>   * data reads and writes.
>   */
> @@ -863,19 +933,22 @@ static int read_reg_dma(struct
> qcom_nand_controller *nandc, int first,
>  {
>  	bool flow_control = false;
>  	void *vaddr;
> -	int size;
> 
> -	if (first == NAND_READ_ID || first == NAND_FLASH_STATUS)
> -		flow_control = true;
> +	vaddr = nandc->reg_read_buf + nandc->reg_read_pos;
> +	nandc->reg_read_pos += num_regs;
> 
>  	if (first == NAND_DEV_CMD_VLD || first == NAND_DEV_CMD1)
>  		first = nandc_dev_addr(nandc, first);
> 
> -	size = num_regs * sizeof(u32);
> -	vaddr = nandc->reg_read_buf + nandc->reg_read_pos;
> -	nandc->reg_read_pos += num_regs;
> +	if (nandc->props->is_bam)
> +		return prep_bam_dma_desc_cmd(nandc, true, first, vaddr,
> +					     num_regs, flags);
> 
> -	return prep_adm_dma_desc(nandc, true, first, vaddr, size, 
> flow_control);
> +	if (first == NAND_READ_ID || first == NAND_FLASH_STATUS)
> +		flow_control = true;
> +
> +	return prep_adm_dma_desc(nandc, true, first, vaddr,
> +				 num_regs * sizeof(u32), flow_control);
>  }
> 
>  /*
> @@ -891,13 +964,9 @@ static int write_reg_dma(struct
> qcom_nand_controller *nandc, int first,
>  	bool flow_control = false;
>  	struct nandc_regs *regs = nandc->regs;
>  	void *vaddr;
> -	int size;
> 
>  	vaddr = offset_to_nandc_reg(regs, first);
> 
> -	if (first == NAND_FLASH_CMD)
> -		flow_control = true;
> -
>  	if (first == NAND_ERASED_CW_DETECT_CFG) {
>  		if (flags & NAND_ERASED_CW_SET)
>  			vaddr = &regs->erased_cw_detect_cfg_set;
> @@ -914,10 +983,15 @@ static int write_reg_dma(struct
> qcom_nand_controller *nandc, int first,
>  	if (first == NAND_DEV_CMD_VLD_RESTORE || first == NAND_DEV_CMD_VLD)
>  		first = nandc_dev_addr(nandc, NAND_DEV_CMD_VLD);
> 
> -	size = num_regs * sizeof(u32);
> +	if (nandc->props->is_bam)
> +		return prep_bam_dma_desc_cmd(nandc, false, first, vaddr,
> +					     num_regs, flags);
> +
> +	if (first == NAND_FLASH_CMD)
> +		flow_control = true;
> 
> -	return prep_adm_dma_desc(nandc, false, first, vaddr, size,
> -				 flow_control);
> +	return prep_adm_dma_desc(nandc, false, first, vaddr,
> +				 num_regs * sizeof(u32), flow_control);
>  }
> 
>  /*
> @@ -1180,7 +1254,8 @@ static int submit_descs(struct
> qcom_nand_controller *nandc)
>  		}
> 
>  		if (bam_txn->cmd_sgl_pos > bam_txn->cmd_sgl_start) {
> -			r = prepare_bam_async_desc(nandc, nandc->cmd_chan, 0);
> +			r = prepare_bam_async_desc(nandc, nandc->cmd_chan,
> +						   DMA_PREP_CMD);
>  			if (r)
>  				return r;
>  		}
> @@ -2716,6 +2791,7 @@ static int qcom_nandc_probe(struct 
> platform_device *pdev)
>  	if (IS_ERR(nandc->base))
>  		return PTR_ERR(nandc->base);
> 
> +	nandc->base_phys = res->start;
>  	nandc->base_dma = phys_to_dma(dev, (phys_addr_t)res->start);
> 
>  	nandc->core_clk = devm_clk_get(dev, "core");