Re: Wallys DR9074-6E(PN02.7) QCN9074 refuses to work on 6GHz band

[Sven Eckelmann <sven@narfation.org>]

[-- Attachment #1.1: Type: text/plain, Size: 1899 bytes --]

On Saturday, 5 November 2022 12:23:02 CET Mariusz wrote:
> My issue is that I cannot get it working on 6GHz bands but it works
> fine on 5GHz. I bought 6E version  and since this is a single band
> module it cannot be both 5G & 6G and linux driver does not agree with
> it being 6E version:
> 
> [71914.038562] ath11k_pci 0000:03:00.0: BAR 0: assigned [mem
> 0xdf800000-0xdf9fffff 64bit]
> [71914.038840] ath11k_pci 0000:03:00.0: MSI vectors: 16
> [71914.038852] ath11k_pci 0000:03:00.0: qcn9074 hw1.0
> [71914.194459] mhi mhi0: Requested to power ON
> [71914.194712] mhi mhi0: Power on setup success
> [71914.297749] mhi mhi0: Wait for device to enter SBL or Mission mode
> [71914.647118] ath11k_pci 0000:03:00.0: chip_id 0x0 chip_family 0x0
> board_id 0xff soc_id 0xffffffff
> [71914.647134] ath11k_pci 0000:03:00.0: fw_version 0x250a04b8
> fw_build_timestamp 2021-12-20 06:41 fw_build_id
> [71916.310787] ath11k_pci 0000:03:00.0 wlp3s0: renamed from wlan0

Just to have this documented publicly: I was in contact with the Wallys 
support and used this opportunity to point out this problem. I've provided 
references to interesting QCA documents and they were able to fix the problem 
on their end (via QDART).

The current status is:

* there will be most likely no tool by them to allow the customer to fix this 
  problem ("missing boards_id which is shown as 0xff") directly
* they will replace these cards. But they have to be send back to the 
  reseller. My understanding is, that the reseller must then also send back
  his stock to get properly configured cards which can then be given to the 
  customers as replacements. But I am not involved in this process and can
  therefore only guess the interactions between reseller and Wallys.

So it is basically the same process as with 8devices. And Mariusz is for 
example already in contact with an EU based reseller.

Kind regards,
	Sven

[-- Attachment #1.2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 102 bytes --]

-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k