From: Jens Ruttke <JRuttke@gmx.de>
To: linux-smp@vger.kernel.org
Subject: Fwd: APIC-Warnung bei Suse 7.3 + 8.0
Date: Tue, 15 Oct 2002 22:26:58 +0200 (MEST) [thread overview]
Message-ID: <32219.1034713618@www7.gmx.net> (raw)
[-- Attachment #1: Type: text/plain, Size: 1396 bytes --]
--- Weitergeleitete Nachricht / Forwarded Message ---
Date: Tue, 15 Oct 2002 22:24:43 +0200 (MEST)
From: Jens Ruttke <JRuttke@gmx.de>
To: linux-smp@vger.kernel.org
Subject: APIC-Warnung bei Suse 7.3 + 8.0
> Hallo Kernel-Team,
>
> bei der Installation von Suse 7.3 und 8.0 erhielt ich
> folgende Fehlermeldung:
>
> <4> WARNING: unexpected IO-APIC, please mail
> <4> to linux-smp@vger.kernel.org
> <4> WARNING: unexpected IO-APIC, please mail
> <4> to linux-smp@vger.kernel.org
> <7>.... register #02: 00000000
> <7>....... : arbitration: 00
>
> Mainboard: MSI-6566E (v1.X) ATX-Mainbord (845E Max)
> Prozessor: P4 1,8 GHZ
> Ram: DDR 512 MB
>
> Linux kann installiert und gestartet werden. Allerdings ist es nicht
> möglich
> das System herunterzufahren (init 0, beenden usw.).
> Nach Eingabe init 0 sind keine Eingaben mehr über Maus und Tastatur
> möglich.
> Im BIOS ist bei APIC-Interrupt Mode Enabled eingestellt. Gibt es eine
> Möglichkeit Linux fehlerfrei betreiben zu können ?
>
> Vielen Dank und viele Grüsse
>
> Jens Ruttke
>
>
>
> --
> +++ GMX - Mail, Messaging & more http://www.gmx.net +++
> NEU: Mit GMX ins Internet. Rund um die Uhr für 1 ct/ Min. surfen!
>
>
--
+++ GMX - Mail, Messaging & more http://www.gmx.net +++
NEU: Mit GMX ins Internet. Rund um die Uhr für 1 ct/ Min. surfen!
[-- Attachment #2: boot.txt --]
[-- Type: text/plain, Size: 21800 bytes --]
Inspecting /boot/System.map-2.4.10-4GB
Loaded 11713 symbols from /boot/System.map-2.4.10-4GB.
Symbols match kernel version 2.4.10.
Loaded 43 symbols from 1 module.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.4.10-4GB (root@Pentium.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 Tue Sep 25 12:33:54 GMT 2001
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
<4> BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
<4> BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
<4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
<4>found SMP MP-table at 000fb900
<4>hm, page 000fb000 reserved twice.
<4>hm, page 000fc000 reserved twice.
<4>hm, page 000f6000 reserved twice.
<4>hm, page 000f7000 reserved twice.
<4>On node 0 totalpages: 131056
<4>zone(0): 4096 pages.
<4>zone(1): 126960 pages.
<4>zone(2): 0 pages.
<4>Intel MultiProcessor Specification v1.4
<4> Virtual Wire compatibility mode.
<4>OEM ID: INTEL Product ID: I845E APIC at: 0xFEE00000
<4>Processor #0 Unknown CPU [15:2] APIC version 20
<4>I/O APIC #2 Version 32 at 0xFEC00000.
<4>Processors: 1
<4>Kernel command line: auto BOOT_IMAGE=linux ro root=301 BOOT_FILE=/boot/vmlinuz enableapic vga=0x0317
<6>Initializing CPU#0
<4>Detected 1817.030 MHz processor.
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 3617.58 BogoMIPS
<4>Memory: 512980k/524224k available (1289k kernel code, 10856k reserved, 381k data, 124k init, 0k highmem)
<4>Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
<4>Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
<4>Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
<7>CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 12K, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
<7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
<7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
<4>CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 04
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>ENABLING IO-APIC IRQs
<6>...changing IO-APIC physical APIC ID to 2 ... ok.
<7>init IO_APIC IRQs
<7> IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-20, 2-21, 2-22 not connected.
<6>..TIMER: vector=0x31 pin1=2 pin2=0
<7>number of MP IRQ sources: 24.
<7>number of IO-APIC #2 registers: 24.
<6>testing the IO APIC.......................
<4>
<7>IO APIC #2......
<7>.... register #00: 02000000
<7>....... : physical APIC id: 02
<7>.... register #01: 00178020
<7>....... : max redirection entries: 0017
<7>....... : IO APIC version: 0020
<4> WARNING: unexpected IO-APIC, please mail
<4> to linux-smp@vger.kernel.org
<4> WARNING: unexpected IO-APIC, please mail
<4> to linux-smp@vger.kernel.org
<7>.... register #02: 00000000
<7>....... : arbitration: 00
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 000 00 1 0 0 0 0 0 0 00
<7> 01 001 01 0 0 0 0 0 1 1 39
<7> 02 001 01 0 0 0 0 0 1 1 31
<7> 03 001 01 0 0 0 0 0 1 1 41
<7> 04 001 01 0 0 0 0 0 1 1 49
<7> 05 000 00 1 0 0 0 0 0 0 00
<7> 06 001 01 0 0 0 0 0 1 1 51
<7> 07 001 01 0 0 0 0 0 1 1 59
<7> 08 001 01 0 0 0 0 0 1 1 61
<7> 09 001 01 0 0 0 0 0 1 1 69
<7> 0a 000 00 1 0 0 0 0 0 0 00
<7> 0b 000 00 1 0 0 0 0 0 0 00
<7> 0c 001 01 0 0 0 0 0 1 1 71
<7> 0d 001 01 0 0 0 0 0 1 1 79
<7> 0e 001 01 0 0 0 0 0 1 1 81
<7> 0f 001 01 0 0 0 0 0 1 1 89
<7> 10 001 01 1 1 0 1 0 1 1 91
<7> 11 001 01 1 1 0 1 0 1 1 99
<7> 12 001 01 1 1 0 1 0 1 1 A1
<7> 13 001 01 1 1 0 1 0 1 1 A9
<7> 14 000 00 1 0 0 0 0 0 0 00
<7> 15 000 00 1 0 0 0 0 0 0 00
<7> 16 000 00 1 0 0 0 0 0 0 00
<7> 17 001 01 1 1 0 1 0 1 1 B1
<7>IRQ to pin mappings:
<7>IRQ0 -> 0:2
<7>IRQ1 -> 0:1
<7>IRQ3 -> 0:3
<7>IRQ4 -> 0:4
<7>IRQ6 -> 0:6
<7>IRQ7 -> 0:7
<7>IRQ8 -> 0:8
<7>IRQ9 -> 0:9
<7>IRQ12 -> 0:12
<7>IRQ13 -> 0:13
<7>IRQ14 -> 0:14
<7>IRQ15 -> 0:15
<7>IRQ16 -> 0:16
<7>IRQ17 -> 0:17
<7>IRQ18 -> 0:18
<7>IRQ19 -> 0:19
<7>IRQ23 -> 0:23
<6>.................................... done.
<4>Using local APIC timer interrupts.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 1816.9918 MHz.
<4>..... host bus clock speed is 100.9438 MHz.
<4>cpu: 0, clocks: 1009438, slice: 504719
<4>CPU0<T0:1009424,T1:504704,D:1,S:504719,C:1009438>
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<4>PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=3
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<6>PCI: Using IRQ router default [8086/24c0] at 00:1f.0
<6>PCI->APIC IRQ transform: (B0,I29,P0) -> 16
<6>PCI->APIC IRQ transform: (B0,I29,P1) -> 19
<6>PCI->APIC IRQ transform: (B0,I29,P2) -> 18
<6>PCI->APIC IRQ transform: (B0,I29,P3) -> 23
<6>PCI->APIC IRQ transform: (B0,I31,P0) -> 18
<6>PCI->APIC IRQ transform: (B0,I31,P1) -> 17
<6>PCI->APIC IRQ transform: (B0,I31,P1) -> 17
<6>PCI->APIC IRQ transform: (B1,I0,P0) -> 16
<6>PCI->APIC IRQ transform: (B3,I1,P0) -> 17
<6>PCI->APIC IRQ transform: (B3,I2,P0) -> 18
<6>PCI->APIC IRQ transform: (B3,I3,P0) -> 19
<6>PCI->APIC IRQ transform: (B3,I4,P0) -> 16
<3> got res[20000000:200003ff] for resource 5 of PCI device 8086:24cb
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
<4>Starting kswapd
<5>VFS: Diskquotas version dquot_6.5.0 initialized
<6>vesafb: framebuffer at 0xd0000000, mapped to 0xe0800000, size 65536k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=41
<6>vesafb: protected mode interface info at c000:55ce
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>Looking for boot splash picture.... found (1024x768, 32431 bytes).
<6>Initializing splash screen... done.
<4>Console: switching to colour frame buffer device 104x34
<6>fb0: VESA VGA frame buffer device
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<4>register_serial(): autoconfig failed
<6>Real Time Clock Driver v1.10e
<4>block: 128 slots per queue, batch=16
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>Uniform Multi-Platform E-IDE driver Revision: 6.31
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<4>PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=24cb
<3>PCI: Device 00:1f.1 not available because of resource collisions
<4>PCI_IDE: chipset revision 1
<4>PCI_IDE: not 100%% native mode: will probe irqs later
<4> ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
<4> ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
<4>PDC20268: IDE controller on PCI bus 03 dev 08
<4>PDC20268: chipset revision 2
<4>PDC20268: not 100%% native mode: will probe irqs later
<4>PDC20268: ROM enabled at 0xdfee0000
<4>PDC20268: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER Mode.
<4> ide2: BM-DMA at 0xac00-0xac07, BIOS settings: hde:pio, hdf:pio
<4> ide3: BM-DMA at 0xac08-0xac0f, BIOS settings: hdg:pio, hdh:pio
<4>hda: MAXTOR 6L040J2, ATA DISK drive
<4>hdc: LTN483L, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=4866/255/63
<4>hdc: ATAPI 48X CD-ROM drive, 120kB Cache
<6>Uniform CD-ROM driver Revision: 3.12
<4>ide-floppy driver 0.97.sv
<6>Partition check:
<6> hda: hda1 hda2 < hda5 hda6 > hda3
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>loop: loaded (max 8 devices)
<4>ide-floppy driver 0.97.sv
<6>SCSI subsystem driver Revision: 1.00
<3>request_module[scsi_hostadapter]: Root fs not mounted
<3>request_module[scsi_hostadapter]: Root fs not mounted
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: Autodetecting RAID arrays.
<4>md: autorun ...
<4>md: ... autorun DONE.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<4>IP: routing cache hash table of 4096 buckets, 32Kbytes
<4>TCP: Hash tables configured (established 32768 bind 32768)
<6>Linux IP multicast router 0.06 plus PIM-SM
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<5>RAMDISK: Compressed image found at block 0
<4>Uncompressing.................................................done.
<4>Freeing initrd memory: 498k freed
<4>VFS: Mounted root (ext2 filesystem).
<6>DC390_init: No EEPROM found! Trying default settings ...
<6>DC390: Used defaults: AdaptID=7, SpeedIdx=0 (10.0 MHz), DevMode=0x1f, AdaptMode=0x2f, TaggedCmnds=3 (16), DelayReset=1s
<6>DC390: 1 adapters found
<6>scsi0 : Tekram DC390/AM53C974 V2.0f 2000-12-20
<4> Vendor: YAMAHA Model: CRW6416S Rev: 1.0c
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0
<6>DC390: Target 3: Sync transfer 10.0 MHz, Offset 15
<4>sr0: scsi3-mmc drive: 16x/16x writer cd/rw xa/form2 cdda tray
<4>VFS: Mounted root (ext2 filesystem) readonly.
<4>change_root: old root has d_count=2
<5>Trying to unmount old root ... okay
<4>Freeing unused kernel memory: 124k freed
<6>Adding Swap: 618492k swap-space (priority 42)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Wed Oct 16 22:24:57 2002
fbmngplay: no process killed
Activating swap-devices in /etc/fstab...
doneChecking file systems...
fsck 1.24a (02-Sep-2001)
/dev/hda1 was not cleanly unmounted, check forced.
/dev/hda1:
Inode 209150, i_blocks is 112, should be 56. FIXED.
/dev/hda1: Inode 214403, i_blocks is 64, should be 40. FIXED.
/dev/hda1: Inode 214409, i_blocks is 64, should be 8. FIXED.
/dev/hda1: Inode 214415, i_blocks is 152, should be 96. FIXED.
/dev/hda1: Inode 214416, i_blocks is 64, should be 8. FIXED.
/dev/hda1: |======================= / 40.8% /dev/hda1: |========================= - 43.8% /dev/hda1: |========================== \ 46.7% 100.0%
/dev/hda1: 93850/384768 files (0.1% non-contiguous), 289856/769104 blocks
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
nothing was mounted
doneActivating remaining swap-devices in /etc/fstab...
doneSetting up the CMOS clockdone
Setting up timezone datadone
Setting up loopback devicedone
Setting up hostnamedone
Mount SHM FS on /dev/shmdone
Configuring serial ports...
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
doneRunning /etc/init.d/boot.local
doneCreating /var/log/boot.msg
done<notice>killproc: kill(25,29)
Enabling syn flood protectiondone
Disabling IP forwardingdone
<notice>killproc: kill(25,3)
INIT: Entering runlevel: 5
Boot logging started on /dev/tty1(/dev/console) at Wed Oct 16 20:26:27 2002
Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>/etc/init.d/rc5.d/S01dummy start
<notice>'/etc/init.d/rc5.d/S01dummy start' exits with status 0
<notice>/etc/init.d/rc5.d/S01i4l_hardware start
<notice>'/etc/init.d/rc5.d/S01i4l_hardware start' exits with status 0
<notice>/etc/init.d/rc5.d/S01personal-firewall.initial start
Starting personal-firewall (initial) [not active]unused
<notice>'/etc/init.d/rc5.d/S01personal-firewall.initial start' exits with status 6
<notice>/etc/init.d/rc5.d/S01random start
Initializing random number generatordone
<notice>'/etc/init.d/rc5.d/S01random start' exits with status 0
<notice>/etc/init.d/rc5.d/S02dhclient start
<notice>'/etc/init.d/rc5.d/S02dhclient start' exits with status 0
<notice>/etc/init.d/rc5.d/S02i4l start
<notice>'/etc/init.d/rc5.d/S02i4l start' exits with status 0
<notice>/etc/init.d/rc5.d/S05network start
<notice>'/etc/init.d/rc5.d/S05network start' exits with status 0
<notice>/etc/init.d/rc5.d/S06hotplug start
Starting hotplugging services [ usb ]done
<notice>'/etc/init.d/rc5.d/S06hotplug start' exits with status 0
<notice>/etc/init.d/rc5.d/S07route start
<notice>'/etc/init.d/rc5.d/S07route start' exits with status 0
<notice>/etc/init.d/rc5.d/S09sshd start
Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=linux CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=104 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
done
<notice>'/etc/init.d/rc5.d/S09sshd start' exits with status 0
<notice>/etc/init.d/rc5.d/S09syslog start
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=linux CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=104 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=linux CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=104 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>'/etc/init.d/rc5.d/S09syslog start' exits with status 0
<notice>/etc/init.d/rc5.d/S09xfs start
<notice>'/etc/init.d/rc5.d/S09xfs start' exits with status 0
<notice>/etc/init.d/rc5.d/S10portmap start
Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=linux CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=104 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/sbin/portmap ]
done
<notice>'/etc/init.d/rc5.d/S10portmap start' exits with status 0
<notice>/etc/init.d/rc5.d/S10splash_early start
<notice>'/etc/init.d/rc5.d/S10splash_early start' exits with status 0
<notice>/etc/init.d/rc5.d/S11nfs start
<notice>'/etc/init.d/rc5.d/S11nfs start' exits with status 0
<notice>/etc/init.d/rc5.d/S12apmd start
<notice>'/etc/init.d/rc5.d/S12apmd start' exits with status 0
<notice>/etc/init.d/rc5.d/S12at start
Starting service at daemon:<notice>startproc: execve (/usr/sbin/atd) [ /usr/sbin/atd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=linux CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=104 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/atd ]
done
<notice>'/etc/init.d/rc5.d/S12at start' exits with status 0
<notice>/etc/init.d/rc5.d/S12fbset start
<notice>'/etc/init.d/rc5.d/S12fbset start' exits with status 0
<notice>/etc/init.d/rc5.d/S12kbd start
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Loading console font lat9w-16.psfu
doneLoading screenmap trivial
doneSetting up console ttys
done<notice>'/etc/init.d/rc5.d/S12kbd start' exits with status 0
<notice>/etc/init.d/rc5.d/S12lpd start
Starting lpd<notice>startproc: execve (/usr/sbin/lpd) [ /usr/sbin/lpd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=linux CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=104 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/lpd ]
done
<notice>'/etc/init.d/rc5.d/S12lpd start' exits with status 0
<notice>/etc/init.d/rc5.d/S12raw start
<notice>'/etc/init.d/rc5.d/S12raw start' exits with status 0
<notice>/etc/init.d/rc5.d/S12sendmail start
<notice>'/etc/init.d/rc5.d/S12sendmail start' exits with status 0
<notice>/etc/init.d/rc5.d/S12smbfs start
<notice>'/etc/init.d/rc5.d/S12smbfs start' exits with status 0
<notice>/etc/init.d/rc5.d/S12smpppd start
<notice>'/etc/init.d/rc5.d/S12smpppd start' exits with status 0
<notice>/etc/init.d/rc5.d/S12xntpd start
<notice>'/etc/init.d/rc5.d/S12xntpd start' exits with status 0
<notice>/etc/init.d/rc5.d/S12ypbind start
<notice>'/etc/init.d/rc5.d/S12ypbind start' exits with status 0
<notice>/etc/init.d/rc5.d/S13autofs start
<notice>'/etc/init.d/rc5.d/S13autofs start' exits with status 0
<notice>/etc/init.d/rc5.d/S13cron start
Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=linux CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=104 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
done
<notice>'/etc/init.d/rc5.d/S13cron start' exits with status 0
<notice>/etc/init.d/rc5.d/S13fam start
<notice>'/etc/init.d/rc5.d/S13fam start' exits with status 0
<notice>/etc/init.d/rc5.d/S13ksysguardd start
<notice>'/etc/init.d/rc5.d/S13ksysguardd start' exits with status 0
<notice>/etc/init.d/rc5.d/S13nfsserver start
<notice>'/etc/init.d/rc5.d/S13nfsserver start' exits with status 0
<notice>/etc/init.d/rc5.d/S13nscd start
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=linux CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=104 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
<notice>'/etc/init.d/rc5.d/S13nscd start' exits with status 0
<notice>/etc/init.d/rc5.d/S13xdm start
Starting service kdm<notice>startproc: execve (/opt/kde2/bin/kdm) [ /opt/kde2/bin/kdm ], [ PWD=/ BOOT_FILE=/boot/vmlinuz LC_MESSAGES= HOSTNAME=linux CONSOLE=/dev/console RC_LANG=de_DE@euro vga=0x0317 PREVLEVEL=N SUSE_DOC_HOST=localhost AUTOBOOT=YES QTDIR=/usr/lib/qt2 LC_TIME= MACHTYPE=i386-suse-linux RC_LC_COLLATE=POSIX LC_ALL= LINES=34 LANG=de_DE@euro LC_NUMERIC= SHLVL=2 COLUMNS=104 LC_CTYPE=de_DE@euro BOOT_IMAGE=linux SHELL=/bin/bash PRINTER=lp HOSTTYPE=i386 OSTYPE=linux WINDOWMANAGER=/usr/X11R6/bin/kde HOME=/ TERM=linux no_proxy=localhost PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 LC_MONETARY= INIT_VERSION=sysvinit-2.78 LC_COLLATE=POSIX _=/sbin/startproc DAEMON=/opt/kde2/bin/kdm ]
done
<notice>'/etc/init.d/rc5.d/S13xdm start' exits with status 0
<notice>/etc/init.d/rc5.d/S20inetd start
<notice>'/etc/init.d/rc5.d/S20inetd start' exits with status 0
<notice>/etc/init.d/rc5.d/S21alsasound start
Starting sound driver:done
<notice>'/etc/init.d/rc5.d/S21alsasound start' exits with status 0
<notice>/etc/init.d/rc5.d/S21personal-firewall.final start
Starting personal-firewall (final) [not active]unused
<notice>'/etc/init.d/rc5.d/S21personal-firewall.final start' exits with status 6
<notice>/etc/init.d/rc5.d/S21splash_late start
<notice>'/etc/init.d/rc5.d/S21splash_late start' exits with status 0
Master Resource Control: runlevel 5 has been reached
Skipped services in runlevel 5: personal-firewall.initial personal-firewall.final
<notice>killproc: kill(124,3)
reply other threads:[~2002-10-15 20:26 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=32219.1034713618@www7.gmx.net \
--to=jruttke@gmx.de \
--cc=linux-smp@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.